Mixed‐cation LiCa‐LSX zeolite with minimum lithium for air separation

The aim of this work was to reduce/minimize Li in Li‐LSX by replacing the 70% Li⁺ cations in Li‐LSX that are bonded to the interior or inaccessible sites which are not used for adsorption. Thus, mixed‐cation LiCa‐LSX containing minimum lithium were prepared by exchanging small fractions of Li⁺ into Ca‐LSX, followed by dehydration under mild conditions to avoid migration/equilibration of Li cations. Comparisons of adsorption isotherms of N₂/O₂ and heats of adsorption for the LiCa‐LSX samples with that for pure‐cation Li‐LSX and Ca‐LSX provided strong evidence that significant amounts of these Li cations indeed remained on the exposed sites (SIII). The mixed‐cation LiCa‐LSX samples were compared against the pure‐cation Ca‐LSX and Li‐LSX based on their performance for oxygen production by PSA, via model simulation. The results showed that the mixed‐cation LiCa‐LSX samples yielded significantly higher O₂ product productivities at the same product purity and recovery than their pure‐cation precursor (Ca‐LSX). © 2017 American Institute of Chemical Engineers AIChE J, 64: 406–415, 2018     

Transport of surface-modified nanoparticles through cell monolayers

We synthesized three peptides, a D-polyarginyl peptide (r8(FITC)), a Tat peptide (Tat(FITC)), and a control peptide (Cp(FITC)) and attached each to amino-CLIO, a nanoparticle 30 nm in diameter. We then examined the effective permeability, Peff, of all six materials through CaCo-2 monolayers. The transport of peptide-nanoparticles was characterized by a lag phase (0-8 h) and a steady-state phase (9-27 h). The steady-state Peff values for peptides were in the order r8(FITC)>Tat(FITC)=Cp(FITC). When r8(FITC) and Tat(FITC) peptides were attached to the nanoparticle, they conferred their propensity to traverse cell monolayers onto the nanoparticle, whereas Cp(FITC) did not. Thus, when the r8(FITC) peptide was attached to the amino-CLIO nanoparticle, the resulting peptide-nanoparticle had a Peff similar to that of this poly-D-arginyl peptide alone. The Peff of r8(FITC)-CLIO (MW approximately 1000 kDa) was similar to that of mannitol (MW=182 Da), a poorly transported reference substance, with a far lower molecular weight. These results are the first to indicate that the modification of nanoparticles by attachment of membrane-translocating sequence-based peptides can alter nanoparticle transport through monolayers. This suggests that the surface modification of nanoparticles might be a general strategy for enhancing the permeability of drugs and that high-permeability nanoparticle-based therapeutics can be useful in selected pharmaceutical applications.     

Optimal modification of annexin V with fluorescent dyes

The many uses of chemically modified annexin Vs necessitate an understanding of the optimal degree of modification and modification sites of the protein. When reacted with the N-hydroxysuccinimide ester of Cy5.5, annexin V with one modification per mole of protein retained its affinity for phosphatidylserine of apoptotic cells, whereas modification with two dyes per mole of protein caused a complete loss of activity. A tryptic digest LC/MS method was used to identify the modification sites as either of two closely spaced lysine residues, in position 286 or 290. The crystal structure indicated the location of these lysines was distal to the phosphatidylserine binding sites on annexin V. These results can be used to develop active or inactive fluorescent control annexin V proteins and to suggest strategies for attaining higher levels of modification with retention of bioactivity.     

Efficient real-time trajectory tracking

Moving objects databases (MOD) manage trajectory information of vehicles, animals, and other mobile objects. A crucial problem is how to efficiently track an object’s trajectory in real-time, in particular if the trajectory data is sensed at the mobile object and thus has to be communicated over a wireless network. We propose a family of tracking protocols that allow trading the communication cost and the amount of trajectory data stored at a MOD off against the spatial accuracy. With each of these protocols, the MOD manages a simplified trajectory that does not deviate by more than a certain accuracy bound from the actual movement. Moreover, the different protocols enable several trade-offs between computational costs, communication cost, and the reduction in the trajectory data: Connection-Preserving Dead Reckoning minimizes the communication cost using dead reckoning, a technique originally designed for tracking an object’s current position. Generic Remote Trajectory Simplification (GRTS) further separates between tracking of the current position and simplification of the past trajectory and can be realized with different line simplification algorithms. For both protocols, we discuss how to bound the space consumption and computing time at the moving object and thereby present an effective compression technique to optimize the reduction performance of real-time line simplification in general. Our evaluations with hundreds of real GPS traces show that a realization of GRTS with a simple simplification heuristic reaches 85–90% of the best possible reduction rate, given by retrospective offline simplification. A realization with the optimal line simplification algorithm by Imai and Iri even reaches more than 97% of the best possible reduction rate.     

Species-specific isotope dilution-based calibration for trace element speciation and its combined uncertainty evaluation: determination of tributyltin in sediment by HPLC-ICPMS

A method is described for the determination of tributyltin (TBT) in NRCC sediment CRM PACS-2 by isotope dilution (ID) analysis using HPLC-ICPMS. Reverse spike ID analysis was performed to determine the accurate concentration of a 117Sn-enriched TBT spike using a well-characterized natural abundance TBT standard. The accuracy of the latter is critical for obtaining reliable results. A unique approach, using hydride generation GC/MS, was developed to quantify the inorganic Sn and dibutyltin impurities in the natural abundance TBT standard. The true natural abundance TBT standard concentration was obtained following correction for these impurities. The total Sn concentration in the natural abundance TBT standard was determined by ID analysis using an enriched inorganic 117Sn following closed vessel mixed-acid digestion. Calibration of the enriched inorganic 117Sn standard was achieved by reverse ID analysis against a natural abundance inorganic tin standard prepared from the high-purity metal. An overall uncertainty associated with the present method was estimated, to which the uncertainties arising from measurement of the natural abundance TBT concentration, from the measurement of the isotope ratio in the spiked sample and in the reverse ID calibration solutions, and from estimation of the extraction efficiency were the main contributors. A concentration of 1.018 +/- 0.054 mg kg(-1) (expanded uncertainty, k = 2) as tin was obtained for TBT in PACS-2 using the present method, in excellent agreement with the certified value of 0.98 +/- 0.13 mg kg(-1) (95% confidence interval). A TBT concentration of 0.97 +/- 0.11 mg kg(-1) (expanded uncertainty, k = 2) as tin in PACS-2 was determined using the standard additions technique. Much smaller expanded uncertainty was obtained with ID, clearly demonstrating its superiority in providing more accurate and precise results over the method of additions. A detection limit (3sigma) of 0.02 mg kg(-1) for TBT, based on a 0.5-g subsample, was obtained.     

Synthesis and biological investigation of novel tricyclic benzodiazepinedione-based RGD analogues

Integrins, a widely expressed family of heterodimeric cell surface adhesion proteins, are expressed in a variety of cell types. They play a decisive role in cell-cell adhesion or cell to extracellular matrix adhesion events. Antagonists of alpha(v)beta(3) or alpha(IIb)beta(3) integrin may have a potential use in suppression of pathological processes. We present the synthesis of novel tricyclic benzodiazepinedione-based RGD analogues, which were subsequently tested in a solid-phase receptor assay in order to investigate their binding affinities towards alpha(v)beta(3) and alpha(IIb)beta(3) integrin.     

Acquiring Customers' Requirementsin Electronic Commerce

A key role for Artificial Intelligencetechnology in electronic commerce is in findingproducts and services that meet a user'srequirements. This may be implemented as athree-stage process of requirementselicitation, product search, and finallyproduct presentation. Alternatively the searchof the product space may happen in tandem withthe requirements elicitation process. It isalso possible to use product presentation as amechanism to focus and give context torequirements elicitation. A variety ofdifferent approaches to this issue of matchingproducts to requirements have been explored inAI research. Thus, while the focus in thispaper is on different approaches torequirements elicitation, these related issuesof product search and product presentation arealso discussed in detail. The paper concludesby placing the other papers in this specialissue in the context of this structuredoverview.     

Relaxation of extrinsic and intrinsic stresses in germanium substrates with silicon films

Si films were deposited on Ge substrates at 400°C by two different Physical Vapor Deposition techniques: (A) ion beam sputtering and (B) magnetron sputtering. The intrinsic stresses in the as-deposited films were measured to be compressive and much greater in samples (A), about −1500 to −2000 MPa than in samples (B), about −300 to −500 MPa. The substrates were subsequently exposed to thermal treatments for varying times at 800°C. In the lower stressed (B) samples, the films had relaxed and reduced the overall curvature of the structure whereas in the high stresses (A) samples, an irreversible large increase in the substrate curvature was found to occur. This indicated that plastic deformation in the Ge substrates itself had occurred.