Accelerated weathering-induced degradation of unprotected multilayer polyethylene slabs. II

The effect of photodegradation on the properties of multilayer polyethylene slabs was evaluated. It was found that photodegradation causes an increase in the degree of crystallinity accompanied by an increase in the elastic modulus and a decrease in elongation and oxygen permeability. It was shown that oxygen and not UV light is the controlling factor in the photodegradation process. © 1996 John Wiley & Sons, Inc.     

Dielectric spectroscopic studies on polypyrrole glucose oxidase films

An investigation was made into the dielectric spectroscopic characteristics of p-toluene sulfonate (PTS) doped polypyrrole (PPY) films in the presence and absence of immobilized glucose oxidase (GOX) in three different configurations: Al-PTS-PPY-Al-PTS-PPY/GOX-Al, and Al-PTS-PPY/GOX/β-D -glucose-Al, respectively. Measurement of dielectric loss and capacitance yielded valuable information about the dielectric properties of GOX immobilized in PTS doped PPY films. The effect of both the temperature and varying βD -glucose concentrations on the mobility of the charge carriers in these films was also systematically studied. © 1996 John Wiley & Sons, Inc.     

Chemotherapeutic agents. XII [1]. Synthesis of Pyrimidines and Fused Pyrimidines as leishmanicides and herbicides

Various bicyclic ( 2 , 3 ) and tricyclic ( 4 , 5 ) heterocycles were prepared by the reaction of 1a , c with dihaloalkanes and polynitrohalobenzene separately. Electrophilic substitution on 1a–c with different alkyl halides yielded mono and dialkyl pyrimidiens ( 6–20 ). Nucleophilic substitution reactions on 18 and 21 with amine and hydrazine separately yielded 22–31 , 21a , b and 41c . Reaction of 25a with ethyl ethoxymethylenecyanoacetate and chloroacetyl chloride separately provided bicyclic compounds 32 and 33 . Condensation-cyclization of 25a with formic, acetic and nitrous acid separately yielded 34a , b and 35 . Reaction of 26a with ethylthiocylycolate and thiourea separately provided 36a and 39 . The latter was alkylated with methyl iodide to 40 . An attempt to cyclize 29a and 30a with thionyl chloride provided bicyclic compounds 37a , b and an uncyclic product 38 . Some of the compounds were screened for leishmanicidal and herbicidal activities and a few of them exhibited significant activity. Leishmaniasis is considered to be one of the most devastating diseases and is ominous to tropical countries. The high toxicity of leishmanicidal drugs in current use, aroused considerable interest to develop new safer and effective chemotherapeutic agents. The only drug pyrimethamine [2] is the representative of pyrimidine derivatives, known as leishmanicides but low order of activity at high dose failed to retain in the clinic. Based on our past experiences in rational designing of leishmanicidal pyrimidine analogs, incorporation of levamisole pharmacophore either in flexible or rigid forms is indispensable for potential activity [1,3] against visceral leishmaniasis. These observations induced an impetus to synthesize pyrimidine analogs as potential leishmanicides.     

Consolidation of advanced composites having volatile generation

Processing polyimide-based thermosetting matrix composites is complicated because of gaseous volatiles produced during the polymerization and crosslinking reactions. This process involves complex interactions between part geometry, temperature and force cycles, and matrix/fiber properties. A simple model for the consolidation process that treats these composites as a three-phase system consisting of fiber, resin, and volatile has been developed. This model has been applied to compression molding process for constant thickness laminates and the predictions agree well with experiments. Further extension to handle three-dimensional parts and the required numerical techniques have also been developed.     

Design of vessels subjected to external pressure

An analytical procedure, developed to simulate the graphic method for the design of vessels subjected to external pressure or vacuum, suggested by the ASME Code, Section VIII, Division 1, is presented in this contribution. A comprehensive computer program based on this method is also presented. The program also covers the design of stiffener rings. The procedure can be easily extended to include other international standards such as the British and German codes, since the method is based on the concept of the number of lobes at collapse. The method produced reproducible results over the entire range of L/D₀ and D₀/t ratios of the code. The deviation observed at any point in this range is less than 0.5% for factor A. The variation in allowable pressure is less than 2%.     

Mining the Wheat Grain Proteome

Bread wheat is the most widely cultivated crop worldwide, used in the production of food products and a feed source for animals. Selection tools that can be applied early in the breeding cycle are needed to accelerate genetic gain for increased wheat production while maintaining or improving grain quality if demand from human population growth is to be fulfilled. Proteomics screening assays of wheat flour can assist breeders to select the best performing breeding lines and discard the worst lines. In this study, we optimised a robust LC–MS shotgun quantitative proteomics method to screen thousands of wheat genotypes. Using 6 cultivars and 4 replicates, we tested 3 resuspension ratios (50, 25, and 17 µL/mg), 2 extraction buffers (with urea or guanidine-hydrochloride), 3 sets of proteases (chymotrypsin, Glu-C, and trypsin/Lys-C), and multiple LC settings. Protein identifications by LC–MS/MS were used to select the best parameters. A total 8738 wheat proteins were identified. The best method was validated on an independent set of 96 cultivars and peptides quantities were normalised using sample weights, an internal standard, and quality controls. Data mining tools found particularly useful to explore the flour proteome are presented (UniProt Retrieve/ID mapping tool, KEGG, AgriGO, REVIGO, and Pathway Tools).     

Effects of dietary supplements of zinc-methionine on milk production,udder health and zinc metabolism in dairy goats

Twenty-two Murciano-Granadina dairy goats were used to investigate the effects of organic Zn supplementation of a diet containing a high level of inorganic Zn. Goats were kept in pens, machine milked once a day throughout lactation and fed a diet based on a dehydrated mixture of whole-plant maize and alfalfa ad libitum, alfalfa pellets, barley grain and a concentrate mixture. Treatments were: (1) control, and (2) supplemented with 1 g/d Zn-Methionine (Zn-Met) included in the concentrate mixture. After parturition, goats were blocked in week 3 and dietary treatments were applied until week 23. From weeks 3-20, feed intake, milk yield, milk composition, milk somatic cell count (SCC), and udder health were measured. In week 21, all goats were injected intraperitoneally with 1 g/d DL-methionine for 5 d to establish the effects of methionine under the conditions of udder stress induced by hand milking on the second day. During weeks 22 and 23, diet digestibility, and N and Zn balance were determined. Dry matter intake, milk yield, and milk contents of total solids, fat, total and true protein, and casein did not differ between treatments, but whey protein and non-protein nitrogen contents were significantly lower for the Zn-Met group. Milk SCC tended to decrease as a result of Zn-Met supplementation but differences between treatments were not significant when halves with persistent infection were excluded. Hand milking increased SCC in both groups, but udders of supplemented goats showed a lower reaction. Apparent absorption of N significantly increased and Zn retention tended to increase in Zn-Met supplemented goats. We conclude that Zn-Met supplementation can enhance resistance to udder stress in dairy goats. Effects were attributed to the organic Zn and not to the methionine component. Zn retention and protein utilization were also improved by the Zn-Met supplement.