Highly luminescent film functionalized with CdTe quantum dots by layer‐by‐layer assembly

Robust and facile strategies are required to fabricate film with high luminescence for application in the fields of biomaterials. In this study, the luminescent electrospinning cellulose fibrous mats were decorated with CdTe quantum dots (QDs) and poly(diallyl dimethyl ammonium chloride) (PDDA) using layer by layer (LBL). The characterizations of the LBL films coated mats were executed by X‐ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, fluorescent spectroscopy, X‐ray diffraction, thermal gravimetric analysis, and differential scanning calorimetry. The luminescent intensities were linearly increased with adding the amount of deposited bilayers. The green fabricated (QDs/PDDA)_n coated mat through physical interactions is a promising luminescent material. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41893.     

Improving the mechanical,thermal and electrical properties of polyurethane- graphene oxide nanocomposites synthesized by in-situ polymerization of ester-based polyol with hexamethylene diisocyanate

Many polyols or diols have been used for the synthesis of polyurethanes (PU), however, to the best of our knowledge, PU-graphene oxide (GO) nanocomposites synthesized with ester-based polyols have been rarely studied. In this work ester-based polyol synthesized by the reaction of adipic acid and 1,4 butane diol, was in-situ polymerized with hexamethylene diisocyanate (HDI) and GO to prepare PU-GO nanocomposites. The content of GO was changed from 1 to 2.5 wt% and its effect on the mechanical, thermal and electrical properties of the samples were examined. The presence of GO more than 1.5% in the nanocomposites resulted in brittle samples and reduced the tensile strength, however, the Young’s modulus of the samples containing 1 and 1.5% was increased to 11 and 12.08-fold (275 and 302 MPa) compared to the neat PU (25 MPa), respectively. The shore A hardness of the samples was increased from 86 for PU to 96 for PUGO-1.5. The abrasion resistance of the samples was decreased by increasing the GO content. Results of the thermogravimetric analysis showed that higher amounts of GO increase the thermal stability of the samples. The chemical and physical interactions between the surface of GO nanolayers and the PU chains were confirmed by FTIR spectroscopy. The dynamic mechanical analysis of the samples showed that GO nanolayers decreased the molecular motions of the PU chains in the nanocomposites which were noticed by shifting the glass transition to the higher temperatures.     

Electrospun biodegradable nanofibers scaffolds for bone tissue engineering

Many polymeric materials have been developed and introduced for bone regeneration. Especially, their nanofibrous forms are mostly applied for artificial extracellular matrices. Polymeric materials in their nanofibrous form show some potent properties such as high surface‐to‐volume ratio, tunable porosity, and ease of surface functionalization. Benefiting from the properties of their main polymer and additives, they can provide new opportunities for cell seeding, proliferation, and new 3D‐tissue formation. This article focuses on most cited polymeric nanofibrous scaffolds fabricated by electrospinning and recent achievements. They were divided into two main categories: natural (collagen, silk, keratin, gelatin, chitosan, and alginate) and synthetic (e.g., polycaprolactone, polylactic acid, and polyglycolic acid) polymers. The role of several additives like hydroxyapatite, bone morphogenetic proteins (BMPs), tricalcium phosphate, and collagen type I in improving the adhesion, differentiation, and tissue formation of stem cells were discussed. Finally, the osteogenic capacity and ability of nanofibrous scaffolds to support the growth of clinically relevant bone tissue were briefly studied. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42883.     

Dynamics and vibration analysis of suspended microchannel resonators based on strain gradient theory

Microsystem Technologies - In this paper, dynamics of a suspended microchannel resonator (SMR) will be derived using the strain gradient theory. Accordingly, the size dependent governing equation...     

Design of laminated composite structures for optimum fiber direction and layer thickness,using optimality criteria

In this study, two optimality criteria are presented for optimum design of composite laminates using finite element method. Thickness of the layers and fiber orientation angles in each finite element are considered as the design variables. It will be shown that the optimum design of composite laminates with varying fiber orientations and layers thicknesses may be found by using these optimality criteria in an efficient way, without performing the sensitivity analysis.     

Automatic detection of depression symptoms in twitter using multimodal analysis

The Journal of Supercomputing - Depression is the most prevalent mental disorder that can lead to suicide. Due to the tendency of people to share their thoughts on social platforms, social data...     

Fuzzy Bayesian system reliability assessment based on Pascal distribution

The main purpose of this paper is to provide a methodology for discussing the fuzzy. Bayesian system reliability from the fuzzy component reliabilities, actually we discuss on the Fuzzy Bayesian system reliability assessment based on Pascal distribution, because the data sometimes cannot be measured and recorded precisely. In order to apply the Bayesian approach, the fuzzy parameters are assumed as fuzzy random variables with fuzzy prior distributions. The (conventional) Bayes estimation method will be used to create the fuzzy Bayes point estimator of system reliability by invoking the well-known theorem called ‘Resolution Identity’ in fuzzy sets theory. On the other hand, we also provide the computational procedures to evaluate the membership degree of any given Bayes point estimate of system reliability. In order to achieve this purpose, we transform the original problem into a nonlinear programming problem. This nonlinear programming problem is then divided into four sub-problems for the purpose of simplifying computation. Finally, the sub problems can be solved by using any commercial optimizers, e.g. GAMS or LINGO.     

Report of the Second Workshop on the Usage of NetFlow/IPFIX in Network Management

Following the success of the First Workshop on the Usage of NetFlow/IPFIX (Pras et al. in J Netw Syst Manag 17(4), 2009) in 2008, the European EMANICS Network of Excellence organized a second workshop in October 2009, held at Jacobs University Bremen. This report summarizes the workshop and presents its main conclusions.     

Development of an RVE using a DEM–FEM scheme under modified approximate periodic boundary condition to estimate the elastic mechanical properties of open foams

Engineering with Computers - In this article, a methodology based on Discrete Element Method (DEM) and Finite Elements Method (FEM) combined with modified Approximate Periodic Boundary Condition...