A novel low power and high speed double edge explicit pulse triggered level converter flip‐flop

One of the effective ways to reduce power consumption is using clustered voltage scaling technique. The level converter flip‐flop is needed to control static current when the block with Low Supply Voltage (VDDL) drives the block with High Supply Voltage (VDDH). One of the big challenges of design is that level converter flip‐flop has low power and high speed. In this paper, pulse triggered level converter flip‐flop and double edge pulse generator were proposed. This level converter flip‐flop used conditional data mapping technique for reducing power consumption. An explicit double edge pulse generator could be shared among several level converter flip‐flops so that power consumption would be reduced. Also, the number of stack transistor was reduced in the discharging path that causes delay decrease. The simulation results showed that the proposed flip‐flop reduced 20% of power consumption and 17% of delay in comparison with other flip‐flops at 50% data switching activity. Copyright © 2013 John Wiley & Sons, Ltd.     

Composition and clinical use of hemodialysates

A thorough knowledge and understanding of the principles underlying the preparation and the clinical application of hemodialysates can help us provide exemplary patient care to individuals having end-stage renal disease. It is prudent to be conversant with the following: (a) how each ingredient in a dialysate works, (b) the clinical circumstances under which the concentration of an ingredient can be altered, and (c) the special situations in which unconventional ingredients can be introduced into a dialysate. The potential to enrich dialysates with appropriate ingredients (such as iron compounds) is limited only by the boundaries of our imagination.     

Evaluation of treatment planning system of brachytherapy according to dose to the rectum delivered

The aim of this study was to assess the actual dose delivered to the rectum and compare it with the treatment planning system (TPS) reports. In this study, the dose delivered to the rectum was measured by semiconductor diode detectors (PTW, Germany). The factors that influence diode response were investigated as well. Calibration factors of diodes were measured weekly to investigate the effect of time interval on the accuracy of calibration. Then 40 applications of patients with cervix carcinoma were evaluated. Rectum dose was measured by means of rectal dosemeter and compared with the TPS-calculated dose. In this research, the differences between the measured and the calculated dose were investigated. The mean difference between the TPS-calculated dose and the measured dose was 6.5% (range: -22 to +39) for rectum. The TPS-calculated maximum dose was typically higher than the measured maximum dose. The study showed that the main reason for the difference was due to the movements of the patient and applicator shift in the elapsed time between the imaging and treatment stage. It is recommended that in vivo dosimetry should be performed in addition to treatment planning computation. In vivo dosimetry is a reliable solution to compare the planned and actual dose delivered to organs at risk.     

Assessment of three preconditioning schemes for solution of the two‐dimensional Euler equations at low Mach number flows

Three preconditioners proposed by Eriksson, Choi and Merkel, and Turkel are implemented in a 2D upwind Euler flow solver on unstructured meshes. The mathematical formulations of these preconditioning schemes for different sets of primitive variables are drawn, and their eigenvalues and eigenvectors are compared with each other. For this purpose, these preconditioning schemes are expressed in a unified formulation. A cell‐centered finite volume Roe's method is used for the discretization of the preconditioned Euler equations. The accuracy and performance of these preconditioning schemes are examined by computing steady low Mach number flows over a NACA0012 airfoil and a two‐element NACA4412–4415 airfoil for different conditions. The study shows that these preconditioning schemes greatly enhance the accuracy and convergence rate of the solution of low Mach number flows. The study indicates that the preconditioning methods implemented provide nearly the same results in accuracy; however, they give different performances in convergence rate. It is demonstrated that although the convergence rate of steady solutions is almost independent of the choice of primitive variables and the structure of eigenvectors and their orthogonality, the condition number of the system of equations plays an important role, and it determines the convergence characteristics of solutions. Copyright © 2011 John Wiley & Sons, Ltd.     

Buckling behavior improvement of steel plate shear wall systems

To improve buckling stability and to prevent early elastic buckling of infill plates, vertical and horizontal plate stiffeners are designed for steel plate shear wall (SPSW) systems. Furthermore, effective design of stiffeners for SPSW systems results in improved structural behavior, such as increase of stiffness, capacity and energy absorption. In this paper, the effect of stiffeners is studied on SPSW structural behavior and consequently a rational method is proposed to determine the minimum required moment of inertia for stiffeners resulting in local buckling mode of the infill plate. The proposed requirement is then compared to results obtained from tests previously conducted, as well as those gained from finite element (FE) analyses performed for this study. Copyright © 2007 John Wiley & Sons, Ltd.     

Effect of cigarette smoke exposure on the growth of Streptococcus mutans and Streptococcus sanguis: an in vitro study.

The aim of the present study was to determine the effect of cigarette smoke on the growth of Streptococcus mutans and Streptococcus sanguis. The standard strains of S. mutans (ATCC 25175) and S. sanguis (ATCC 10556) were cultured on blood agar and incubated for 48 hr in three main environments: atmospheric air, carbon dioxide, and cigarette smoke. Kent gold 1(nicotine: 0.1 mg, tar: 1 mg), Kent lights (nicotine: 0.8 mg, tar: 9 mg) and Bahman (nicotine: 1 mg, tar: 13 mg) were the brands used in the present study. Afterwards, digital photographs of the colonies were taken and the diameter of colonies was measured. Data were analyzed using Post Hoc and General Linear Model statistical tests. Cigarette smoke and carbon dioxide environments significantly increased the growth of S. mutans. However, high nicotine/tar content cigarette smoke (Bahman) had the greatest impact on S. mutans and S. sanguis. The mutans/sanguis ratio, which was 0.71 in atmospheric air, increased to 1.07 in the presence of carbon dioxide. Kent gold 1, Kent lights, and Bahman demonstrated a mutans/sanguis ratio of 1, 0.84, and 0.98 respectively. In conclusion, it seems that the growth of S. sanguis and S. mutans is accelerated in the vicinity of cigarette smoke.     

Hydrogen production by catalytic near-critical water gasification and steam reforming of glucose

Near-critical water gasification (NCWG) and steam reforming (SR) were investigated for the production of hydrogen from a biomass model compound (glucose) using fixed bed tubular reactor. Ruthenium/carbon and nickel/yttria stabilized zirconia (YSZ) were utilized to enhance the reaction rates of the two processes for NCWG and SR, respectively. NCWG experiments were performed at 200 bar and 360–450 °C, while SR experiments were conducted at 500–800 °C and atmospheric pressure. Although in both cases complete carbon gasification is achieved, gas composition, hydrogen selectivity and overall energy efficiency show strong dependencies on the type of process itself and the associated operating conditions. It is shown that operating the reforming reaction of glucose at high pressures and low temperatures (NCWG) results in a significant amount of methane and trace amounts of carbon monoxide. In contrast, gasification of glucose at atmospheric pressures and high temperatures (SR) leads to a methane-free gas stream that contains few percents of carbon monoxide. Considering energy recovery and neglecting the heat losses, the maximum cold gas efficiency of the NCWG and SR reached 78% and 91%, respectively. The features of the two catalytic reaction processes are discussed in terms of the experiments and process simulations.