Examination of Interpenetrating Polymer Networks of Polyurea in Silicone Molds Arising during Vacuum Casting Processes

We present an in-depth investigation of the aging effects in silicone molds for vacuum casting processes. Their lifetime is limited to a few production cycles due to contamination with the diisocyanate component of polyurethane casting materials. Using thermogravimetric analysis measurements, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and helium-ion-microscopy the chemical and physical mechanisms of the aging process have been identified. It has been shown that a diffusion process of diisocyanate into the cavity surface leads to the formation of interpenetrating polymer networks of polyurea derivatives in silicone rubber. This has been proven by extracting and analyzing polyurea of low molecular weights from the silicone.     

Analysis of the Shrinkage Effect on Mass Transfer During Convective Drying of Sawdust/Sludge Mixtures

Convective drying of wastewater sludges and sawdust/sludge mixtures was studied. The first part of this work was an experimental study performed in a cross-flow convective dryer using 500 g of wet material extruded through a disk with circular dies of 12 mm. The results showed that the sawdust addition has a positive impact on the drying process from a mass ratio of 2/8, on a dry basis, with observed drying rates higher than the original sludge. The second part of this work consisted of developing a drying model in order to identify the internal diffusion coefficient and convective mass transfer coefficient from the experimental data. A comparison was made between fitted drying curves, well represented by the Newton's model, and the analytical solutions of the diffusion equation applied to a finite cylinder. Variations of dimensional characteristics, such as the volume and exchange surface of the sample bed, were obtained by X-ray tomography. This technique allowed us to confirm that shrinkage, which is an important phenomenon occurring during sludge and sawdust/sludge mixture drying, must be taken into account. The results showed that both the internal diffusion coefficient and convective mass transfer coefficient were affected by mixing and sawdust addition. The internal diffusion coefficient changed from 7.77 × 10^?9 m²/s for the original sludge to 7.01 × 10^?9 m²/s for the mixed sludge and then increased to 8.35 × 10^?9 m²/s for the mixture of a mass ratio of 4/6. The convective mass transfer coefficient changed from 9.70 × 10^?8 m/s for the original sludge to 8.67 × 10^?8 m/s for the mixed sludge and then increased to 12.09 × 10^?8 m/s for the mixture of a mass ratio of 4/6. These results confirmed that sawdust addition was beneficial to the sludge drying process as the mass transfer efficiency between the air and material increased. Reinforcing the texture of sludge by adding sawdust can increase the drying rate and decrease the drying time, and then the heat energy supply will be reduced significantly. The study also showed that neglecting shrinkage phenomenon resulted in an overestimation for the internal diffusion coefficient for the convective drying of sludges and sawdust/sludge mixtures.     

Targeted,Needle‐Free Vaccinations in Skin using Multilayered,Densely‐Packed Dissolving Microprojection Arrays

Targeting of vaccines to abundant immune cell populations within our outer thin skin layers using miniaturized devices—much thinner than a needle and syringe, could improve the efficacy of vaccines (and other immunotherapies). To meet this goal, a densely packed dissolving microprojection array (dissolving Nanopatch) is designed, achieving functional miniaturization by 1) formulating small microneedles (two orders of magnitude smaller than a standard needle and syringe) and 2) multiple layering of the payload within microprojections with tight tolerances (of the order of a micrometer). The formulation method is suitable to many vaccines because it is without harsh or complex chemical processes, and it is performed at low temperatures and at a neutral pH. When the formulated dNPs are applied to skin, consistent and robust penetration is achieved, rapidly targeting the skin strata of interest (<5 min; significantly faster than larger dissolving microneedles that have been previously reported). Resultant diffusion is significantly enhanced within the dermis compared with the epidermis. Using two different antigens (ovalbumin and a commercial trivalent influenza vaccine [Fluvax2008]), the administration of these dissolving patches generate robust systemic immune responses in a mouse model. To the authors' knowledge, this is the first report of successful vaccination with any form of dissolving microneedles. The patches made by this method therefore have the potential for pain‐free, needle‐free, and effective vaccination in humans.     

Master equations for Wigner functions with spontaneous collapse and their relation to thermodynamic irreversibility

Journal of Computational Electronics - Wigner functions, allowing for a reformulation of quantum mechanics in phase space, are of central importance for the study of the quantum-classical...     

Investigation mechanism of DEA as an activator on aqueous MEA solution for postcombustion CO2 capture

In this work, Diethanolamine (DEA) was considered as an activator to enhance the CO₂ capture performance of Monoethanolamine (MEA). The addition of DEA into MEA system was expected to improve disadvantages of MEA on regeneration heat, degradation, and corrosivity. To understand the reaction mechanism of blended MEA‐DEA solvent and CO₂, ¹³C nuclear magnetic resonance (NMR) technique was used to study the ions (MEACOO^‐, DEACOO^–, MEA, DEA, MEAH⁺, DEAH⁺, , ) speciation in the blended MEA‐DEA‐CO₂‐H₂O systems with CO₂ loading range from 0 to 0.7 mol CO₂/mol amine at the temperature of 301 K. The different ratios of MEA and DEA (MEA: DEA = 2.0:0, 1.5:0.5, 1.0:1.0, and 0:2.0) were studied to comprehensively investigate the role of DEA in the system of MEA‐DEA‐CO₂‐H₂O. The results revealed that DEA performs the coordinative role at the low CO₂ loading and the competitive role at high CO₂ loading. Additionally, the mechanism was also proposed to interpret the reaction process of the blended solvent with CO₂. © 2018 American Institute of Chemical Engineers AIChE J, 64: 2515–2525, 2018     

Differential Domain Distribution of gnomAD- and Disease-Linked Connexin Missense Variants

Twenty-one human genes encode connexins, a family of homologous proteins making gap junction (GJ) channels, which mediate direct intercellular communication to synchronize tissue/organ activities. Genetic variants in more than half of the connexin genes are associated with dozens of different Mendelian inherited diseases. With rapid advances in DNA sequencing technology, more variants are being identified not only in families and individuals with diseases but also in people in the general population without any apparent linkage to Mendelian inherited diseases. Nevertheless, it remains challenging to classify the pathogenicity of a newly identified connexin variant. Here, we analyzed the disease- and Genome Aggregation Database (gnomAD, as a proxy of the general population)-linked variants in the coding region of the four disease-linked α connexin genes. We found that the most abundant and position-sensitive missense variants showed distinct domain distribution preference between disease- and gnomAD-linked variants. Plotting missense variants on topological and structural models revealed that disease-linked missense variants are highly enriched on the structurally stable/resolved domains, especially the pore-lining domains, while the gnomAD-linked missense variants are highly enriched in the structurally unstable/unresolved domains, especially the carboxyl terminus. In addition, disease-linked variants tend to be on highly conserved residues and those positions show evolutionary co-variation, while the gnomAD-linked missense variants are likely on less conserved residue positions and on positions without co-variation. Collectively, the revealed distribution patterns of disease- and gnomAD-linked missense variants further our understanding of the GJ structure–biological function relationship, which is valuable for classifying the pathogenicity of newly identified connexin variants.     

Boron removal from water and its recovery using iron (Fe) oxide/hydroxide-based nanoparticles (NanoFe) and NanoFe-impregnated granular activated carbon as adsorbent

This study presents information obtained by the synthesis of Fe(3) oxide/hydroxide nanoparticles sol (NanoFe) and NanoFe-impregnated granular activated carbon as adsorbents for boron removal from solutions. The research describes an adsorption method for cleaning a solution containing boron contaminants followed by recovery of the adsorbent and the adsorbed material for safe removal or further reuse. The technology provides an efficient method of boron removal from water. A marked effect of NanoFe and NanoFe-impregnated GAC adsorbents concentration and pH level on boron removal efficiency was demonstrated. At least 95–98% boron recovery efficiency is possible using NanoFe sol and Fe-impregnated GAC that in fact also recover the adsorbent for reuse. Boron adsorption onto the NanoFe-impregnated GAC adsorbent may be described by pseudo-second-order reaction kinetics and the Langmuir isotherm model. The boron adsorption capacity on iron (3) oxide nanoparticles and Fe-impregnated GAC at an equilibrium concentration of 0.3 mg/dm³ as B in the solution is much higher than these values for similar adsorbents reported in the literature.     

Design and evaluation of a mobile smart home interactive system with elderly users in Brazil

Personal and Ubiquitous Computing - This article presents a study concerning the evaluation of a smart home control system for elderly people with a sample of 10 users in a city in the interior of...