Risk assessment of exposure to mycotoxins (aflatoxins and fumonisins) through corn tortilla intake in Veracruz City (Mexico)

This study aimed to assess aflatoxin and fumonisin intake through corn tortilla consumption in Veracruz city. Between October 2013 and February 2015, a total of 120 corn tortilla samples (2 kg samples, 40 samples per year) were randomly collected. Aflatoxins and fumonisins were quantified by high performance liquid chromatography coupled with a fluorescence detector. A probability density function (PDF) was used for describing corn tortilla intake, body weight of the Veracruz city population, mycotoxin content of corn tortilla samples and estimated mycotoxin daily intake. The Monte Carlo method with 10,000 iterations was employed to assess the population exposure risk. The highest level of total aflatoxins (AFT) was 22.17 μg kg^?1, and 526.6 μg kg^?1 for fumonisins B₁ plus B₂, with 85% and 90% of contaminated samples respectively. Up to 69.7 % of the population was estimated to consume a higher aflatoxin dose than that recommended by the JECFA (1 ng kg^?1 of body weight per day); it was found that the recommended dose was exceeded to a greater extent in the male population, due to higher consumption of corn. The risk of fumonisin intake was less than 5 % due to the low presence and levels of these toxins in corn tortillas. The results suggest that corn tortilla consumers are at dietary risk caused by AFT contamination; this information should be considered when taking action to protect public health.     

The effect of geotextile reinforcement and prefabricated vertical drains on the stability and settlement of embankments

The construction of four dikes on deep strata of very soft clay has required the application of several measures to improve the performance of the foundation, such as very wide berms, basal geotextile reinforcement and prefabricated vertical drains (PVDs). In order to control the rate of construction, the foundation and the dikes have been monitored with settlement plates, topographic stakes, inclinometers and piezometers. The use of back-analysis has allowed finding the adequate material model, the smearing of drains and the coefficient of secondary compression necessary to attain a good agreement between the measurements supplied by the instrumentation and the calculated values obtained with an elastic-viscoplastic (EVP) finite element (FE) program. Both the geotextile reinforcement and the PVDs produce an important increase in the safety factor (SF). The PVDs produce a significant acceleration in settlements, but the influence of the geotextile in the settlements is negligible. The combined use of the geosynthetic reinforcement and PVDs enhances embankment performance substantially more than the use of either method of soil improvement alone. The importance of flow in the results has been established.     

A simple improvement of a tip loss model for actuator disc simulations

The loading of a wind turbine decreases towards the blade tip because of the velocities induced by the tip vortex. This tip loss effect has to be taken into account when performing actuator disc simulations, where the single blades of the turbine are not modeled. A widely used method applies a factor on the axial and tangential loading of the turbine. This factor decreases when approaching the blade tip. It has been shown that the factor should be different for the axial and tangential loading of the turbine to model the rotation of the resulting force vector at the airfoil sections caused by the induced velocity. The present article contains the derivation of a simple correction for the tangential load factor that takes this rotation into account. The correction does not need any additional curve fitting but just depends on the local airfoil characteristics and angle of attack. Actuator disc computations with the modified tip loss correction show improved agreement with results from actuator line, free wake lifting line, and blade element momentum simulations.     

PNET “ONDM 2019” special issue

Photonic Network Communications -     

Evaluation of FFT-Based and Moder Parametrc Methods for the Spectral Analysis of Bioprosthetic Valve Sounds

The objective of this paper is to compare the performance of conventional FFT-based (basic periodogram and Welch's method) and modern parametric (all-pole and pole-zero modeling) methods in estimating the spectral distribution of cardiac bioprosthetic valve sounds, and for the extraction of the two most dominant frequency peaks (DFP). These methods were tested for stability by adding random noise and truncating the bioprosthetic valve closing sounds, and for reproducibility by measuring the variance of the spectra obtained from three consecutive recordings of each patient. Results from a group of 11 patients show that the basic periodogram and Steiglitz-McBride's method with maximum entropy (pole-zero modeling) provide the most consistent (minimal variance) estimates of the DFP's of the closing sounds. However, for estimating spectral distributions, the most stable methods appear to be the basic periodogram and Steiglitz-McBride's method with extrapolation to zero. The basic periodogram appears to be the best compromise to estimate both the spectral distribution and the DFP's of the bioprosthetic closing sounds.