Design and predicted performance of the 3-stage ADR for the Soft-X-ray Spectrometer instrument on Astro-H

The Japanese Astro-H mission will include the Soft X-ray Spectrometer (SXS) instrument provided by NASA/GSFC. The SXS will perform imaging spectroscopy in the soft X-ray band using a 6 × 6 array of silicon microcalorimeters operated at 50 mK. The detectors will be cooled by a 3-stage adiabatic demagnetization refrigerator (ADR). The configuration allows the ADR to operate with both a 1.3 K superfluid helium bath and a 4.5 K cryocooler as its heat sink. Initially, when liquid helium is present, the two coldest stages of the ADR will operate in a single-shot mode to cool the detectors from 1.3 K. During this phase of the mission, the 3rd stage may be used to reduce the net heat load on the liquid helium and extend its lifetime. When the liquid is depleted, the 2nd and 3rd stages will operate in a continuous mode to maintain the helium tank at about 1.3 K, allowing continued operation of the 1st stage (in a single-shot mode) and hence the SXS instrument. This paper describes the design and operating modes of the ADR, as well as details of critical components.     

Influence of single wall carbon nanotubes and thermal treatment on the morphology of polymer thin films

Homogeneous and stable thin films of poly(butylene terephthalate) PBT and its nanocomposites based on single wall carbon nanotubes (SWCNTs) were prepared by spin coating. PBT thin films show crystalline structures for thicknesses above 40 nm, consisting of submicrometer size 2D-spherulites. In the case of nanocomposites, carbon nanotubes act as nucleating agents and provide a template for the crystallization of PBT. This gives rise to hybrid shish-kebab structures, even in the thinnest films (∼10 nm thick). Melting and recrystallization provoke the crystallization of PBT and its nanocomposites, and can be used to control morphology. For PBT thin films, the orientation of crystalline lamellae undergoes a transformation, changing from a disposition perpendicular to the substrate (“edge-on”) to a parallel arrangement (“flat-on”) after recrystallization. In the case of the nanocomposites, the CNT influence on the polymer crystallization morphology in thin films is less significant than in the bulk due to the effect of the substrate interactions. Using Raman microscopy it is possible to directly observe both, the degree of dispersion and the location of carbon nanotubes in the films. The results reveal that bigger agglomerates act as more effective nucleating points than isolated bundles of SWCNTs during crystallization of the polymer matrix.     

Study of the mechanical,electrical and morphological properties of PU/MWCNT composites obtained by two different processing routes

A comparative study of the influence of processing route on polyurethanes (PUs)/multiwalled carbon nanotube (MWCNT) composites mechanical and electrical properties and also morphology was undergone employing two differentiated processing methods, solvent casting and buckypaper infiltration, for producing PU composites with low, medium and high mass fractions of acid treated MWCNT, and with no covalent linkages between the matrix and the nanotubes. As for example, with a MWCNT mass fraction of ∼18 wt.% the second method produced stiffer (270 MPa), lighter (948 kg m⁻³) and more electrically conductive (1.8 S cm⁻¹) composite while the first one gave softer (111 MPa) and more ductile (141%) materials. These properties differences are related to the different PU/MWCNT dispositions obtained through each synthesis route. Nanotubes percolating concentration is found to be crucial on composite properties evolution and a preferential interaction of MWCNT with PU hard segments is observed for solvent cast composites.     

Preparation and characterization of free films of high amylose/pectin mixtures cross-linked with sodium trimetaphosphate

High amylose and pectin were mixed at 1:1 mass ratio and cross-linked with sodium trimetaphosphate (STMP) in alkaline medium. Films were prepared from aqueous dispersions of these cross-linked polymer blend at three different concentrations (3, 4 and 5%), by solvent casting method. Characterization of the films included thickness, surface morphology, water uptake, water vapor permeability (WVP), tensile strength measurements and enzymatic digestion. The cross-linking allowed to obtain films with improved mechanical properties and reduced WVP. The high resistance to enzymatic digestion exhibited by these films represents a promising approach to their application in the development of colon drug delivery systems.     

Correlation lengths, porosity and water adsorption in TiO₂ thin films prepared by glancing angle deposition

This paper reports a thorough microstructural characterization of glancing angle deposited (GLAD) TiO(2) thin films. Atomic force microscopy (afm), grazing-incidence small-angle x-ray scattering (GISAXS) and water adsorption isotherms have been used to determine the evolution of porosity and the existence of some correlation distances between the nanocolumns constituting the basic elements of the film's nanostructure. It is found that the deposition angle and, to a lesser extent, the film thickness are the most important parameters controlling properties of the thin film. The importance of porosity and some critical dimensions encountered in the investigated GLAD thin films is highlighted in relation to the analysis of their optical properties when utilized as antireflective coatings or as hosts and templates for the development of new composite materials.     

Small area estimators based on restricted mixed models

This paper proposes a new model-based approach to estimate small areas that extends the Fay–Herriot methodology. The new model is additive, with a random term to characterize the inter-area variability and a nonparametric mean function specification, defined using the information on an auxiliary variable. The most significant advantage of the proposal is that it avoids the model misspecification problem. The monotonicity is the only assumption about the functional form of the relationship between the variable of interest and the auxiliary one. Estimators for the area means are derived combining “Order Restricted Inference” and standard mixed model approaches. A large simulation experiment shows how the new approach outperforms the Fay–Herriot methodology in many scenarios. Besides, the new method is applied to the Australian farms data.     

Performance analysis of the domestic water meter park in water supply network of Ibarra,Ecuador

Apparent losses are one of the most important components of non-revenue water and mainly caused by water meter under-registration. This paper studies the performance of a water meter park from a developing country water utility in Ibarra city, Ecuador. The study includes three major aspects: water meter error curve reconstruction with seven different flow rates; water meter evaluation as a function of class, manufacturer and totalized registered volume, use of two water consumption patterns for weighted error determination and their influence on water balance and performance indicators analysis. Results indicate that 44% of analyzed meters works at optimal conditions. Weighted error obtained by using two different consumption patterns indicates a 0.95% difference, which has an important impact on water balance and performance indicator results. This detailed analysis of water meters can help to develop a more efficient water meter replacement strategy and to estimate apparent water loss volume more accurately.     

3-Pentanol: A New Attractant Present in Volatile Emissions from the Ambrosia Beetle, Megaplatypus mutatus

Megaplatypus mutatus (=Platypus mutatus) (Coleoptera: Platypodidae) is an ambrosia beetle that is native to South America. It attacks only standing live trees and causes severe stem breakage and death in commercial poplar (Populus) plantations. Previous work showed that male M. mutatus emits a sex pheromone composed mainly of (+)-sulcatol and sulcatone. We collected male volatile emissions during the hours of maximum emergence by using a specific polar microextraction phase; analyzed the extract by GC-MS; and tested the biological activity of selected compounds in the extract with a walking behavioral assay. Female M. mutatus emerged primarily between 7 and 11 h. In the chemical analyses of volatiles, a third compound, 3-pentanol, was identified in a small percentage of samples. Walking behavioral bioassays with video image analysis showed that at the doses tested, 3-pentanol elicited an attractive response from females.     

Microdomain composition and properties differences of biodegradable polyurethanes based on MDI and HDI

The study of the effect of the diisocyanate structure on the microstructure and macroscopic properties of polyurethanes was the main aim of this work. Biodegradable segmented thermoplastic elastomeric polyurethanes based on a poly(hexamethylene carbonate‐co‐caprolactone)diol (PHM‐co‐PCL) as soft segment were synthesized using 1,4‐butanediol (BD) as chain extender and both 4,4′‐diphenylmethane diisocyanate (MDI) and 1,6‐hexamethylene diisocyanate (HDI) as components of the hard segment by the two shoot synthesis procedure. Microphase structure and properties were analyzed using Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) as complementary techniques, used to characterize thermal transitions of the polyurethanes and to assign them to determinate functional groups interactions. Gaussian deconvolution technique was used to decompose carbonyl region in four peaks and to study the hydrogen bonding within the different polyurethanes. Both DSC and FTIR showed that MDI‐based biodegradable polyurethanes were less phase segregated than to those based on HDI, and thus that diisocyanate structure has an important role on microdomain composition and polyurethanes properties. Macroscopic properties as hardness and water‐polymer contact angles are related to polyurethanes microphase compositions. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers.