乌斯特:全新的HVI分析工具

对于原棉纤维性能的深入了解有助于纺纱厂在挑选和管理纤维时做出更为优化的决策,乌斯特技术公司推出的USTERHVIMF100可帮助纺纱厂改善纤维选择和纤维管理,从而降低成本、提高利润和改善产品质量。     

The Effects of Probiotics,Prebiotics and Synbiotics in Non-Alcoholic Fat Liver Disease (NAFLD) and Non-Alcoholic Steatohepatitis (NASH): A Systematic Review

Modifications in the microbiota caused by environmental and genetic reasons can unbalance the intestinal homeostasis, deregulating the host’s metabolism and immune system, intensifying the risk factors for the development and aggravation of non-alcoholic fat liver disease (NAFLD). The use of probiotics, prebiotics and synbiotics have been considered a potential and promising strategy to regulate the gut microbiota and produce beneficial effects in patients with liver conditions. For this reason, this review aimed to evaluate the effectiveness of probiotics, prebiotics, and symbiotics in patients with NAFLD and NASH. Pubmed, Embase, and Cochrane databases were consulted, and PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) guidelines were followed. The clinical trials used in this study demonstrated that gut microbiota interventions could improve a wide range of markers of inflammation, glycemia, insulin resistance, dyslipidemia, obesity, liver injury (decrease of hepatic enzymes and steatosis and fibrosis). Although microbiota modulators do not play a healing role, they can work as an important adjunct therapy in pathological processes involving NAFLD and its spectrums, either by improving the intestinal barrier or by preventing the formation of toxic metabolites for the liver or by acting on the immune system.     

The Relationship between COVID-19 and Hypothalamic–Pituitary–Adrenal Axis: A Large Spectrum from Glucocorticoid Insufficiency to Excess—The CAPISCO International Expert Panel

Coronavirus disease 2019 (COVID-19) is a highly heterogeneous disease regarding severity, vulnerability to infection due to comorbidities, and treatment approaches. The hypothalamic–pituitary–adrenal (HPA) axis has been identified as one of the most critical endocrine targets of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) that might significantly impact outcomes after infection. Herein we review the rationale for glucocorticoid use in the setting of COVID-19 and emphasize the need to have a low index of suspicion for glucocorticoid-induced adrenal insufficiency, adjusting for the glucocorticoid formulation used, dose, treatment duration, and underlying health problems. We also address several additional mechanisms that may cause HPA axis dysfunction, including critical illness-related corticosteroid insufficiency, the direct cytopathic impacts of SARS-CoV-2 infection on the adrenals, pituitary, and hypothalamus, immune-mediated inflammations, small vessel vasculitis, microthrombotic events, the resistance of cortisol receptors, and impaired post-receptor signaling, as well as the dissociation of ACTH and cortisol regulation. We also discuss the increased risk of infection and more severe illness in COVID-19 patients with pre-existing disorders of the HPA axis, from insufficiency to excess. These insights into the complex regulation of the HPA axis reveal how well the body performs in its adaptive survival mechanism during a severe infection, such as SARS-CoV-2, and how many parameters might disbalance the outcomes of this adaptation.     

Heterozygote Dopamine Transporter Knockout Rats Display Enhanced Cocaine Locomotion in Adolescent Females

Cocaine is a powerful psychostimulant that is one of the most widely used illicit addictive. The dopamine transporter (DAT) plays a major role in mediating cocaine’s reward effect. Decreases in DAT expression increase rates of drug abuse and vulnerability to comorbid psychiatric disorders. We used the novel DAT transgenic rat model to study the effects of cocaine on locomotor behaviors in adolescent rats, with an emphasis on sex. Female rats showed higher response rates to cocaine at lower acute and chronic doses, highlighting a higher vulnerability and perceived gender effects. In contrast, locomotor responses to an acute high dose of cocaine were more marked and sustained in male DAT heterozygous (HET) adolescents. The results demonstrate the augmented effects of chronic cocaine in HET DAT adolescent female rats. Knockout (KO) DAT led to a level of hyperdopaminergia which caused a marked basal hyperactivity that was unchanged, consistent with a possible ceiling effect. We suggest a role of alpha synuclein (α-syn) and PICK 1 protein expressions to the increased vulnerability in female rats. These proteins showed a lower expression in female HET and KO rats. This study highlights gender differences associated with mutations which affect DAT expression and can increase susceptibility to cocaine abuse in adolescence.     

仿生土木工程研究进展与展望

随着城镇化水平不断提升,中国每年新增建筑面积约20亿m²,大规模基础设施建设对土木工程理论和技术创新的要求越来越高。学者们通过研究自然界的增强增韧、水下黏合、钻孔掘进和轻质高强等现象发现,生物体具有独特的外部形态和组织结构,通过模仿生物体的外部形态、结构特征或运动机理可为土木工程技术创新和可持续发展提供新思路、新原理和新理论。从仿生材料、仿生结构和仿生机械与构筑物3个方面阐述仿生学在土木工程中的应用,列举典型的应用案例,并对仿生土木工程进行总结和展望,为未来的研究提供基础材料。作为新兴的研究方向,仿生土木工程基础理论尚不完善,仿生土木工程涉及生物、材料、结构等多学科的交叉,需要开展不同领域间的协同合作研究。     

Effect of binder system on the thermophysical properties of 3D-printed zirconia ceramics

Fabrication of 3D-printed ceramic parts with high complexity and high spatial resolution often demands low wall thickness as well as high stiffness at the green state, whereas printing simpler geometries may tolerate thicker, more compliant walls with the advantage of a rapid binder-burn-out and sintering process. In this work, the influence of the binder system on the thermophysical properties of 3D-printed stabilized zirconia ceramics was investigated. Samples were fabricated with the lithography-based ceramic manufacturing (LCM) technology using two different photosensitive ceramic suspensions (LithaCon 3Y230 and LithaCon 3Y210), with the same ZrO₂ powder. A significant difference in stiffness in the green state (~3 MPa vs. ~32 MPa for LithaCon 3Y230 and LithaCon 3Y210, respectively) was measured, associated with a rather loose or a linked network formed in the binder due to photopolymerization. Both materials reached high relative densities, that is, >99%, exhibiting a homogeneous fine-grained microstructure. No significant differences on the coefficient of thermal expansion (11.18 ppm/K vs. 11.17 ppm/K) or Young's modulus (207 GPa vs. 205 GPa) were measured, thus demonstrating the potential of tailoring binder systems to achieve the required accuracy in 3D-printed parts, without detrimental effects on material's microstructure and thermophysical properties at the sintered state.     

Biopolymers as green-based food packaging materials: A focus on modified and unmodified starch-based films

The ideal food packaging materials are recyclable, biodegradable, and compostable. Starch from plant sources, such as tubers, legumes, cereals, and agro-industrial plant residues, is considered one of the most suitable biopolymers for producing biodegradable films due to its natural abundance and low cost. The chemical modification of starch makes it possible to produce films with better technological properties by changing the functional groups into starch. Using biopolymers extracted from agro-industrial waste can add value to a raw material that would otherwise be discarded. The recent COVID-19 pandemic has driven a rise in demand for single-use plastics, intensifying pressure on this already out-of-control issue. This review provides an overview of biopolymers, with a particular focus on starch, to develop sustainable materials for food packaging. This study summarizes the methods and provides a potential approach to starch modification for improving the mechanical and barrier properties of starch-based films. This review also updates some trends pointed out by the food packaging sector in the last years, considering the impacts of the COVID-19 pandemic. Perspectives to achieve more sustainable food packaging toward a more circular economy are drawn.     

Photo-Rechargeable Li-Ion Batteries using TiS2 Cathode

Photo-rechargeable (solar) battery can be considered as an energy harvesting cum storage system, where it can charge the conventional metal-ion battery using light instead of electricity, without having other parasitic reactions. Here a two-electrode lithium-ion solar battery with multifaceted TiS₂–TiO₂ hybrid sheets as cathode. The choice of TiS₂–TiO₂ electrode ensures the formation of a type II semiconductor heterostructure while the lateral heterostructure geometry ensures high mass/charge transfer and light interactions with the electrode. TiS₂ has a higher lithium binding energy (1.6 eV) than TiO₂ (1.03 eV), ensuring the possibilities of higher amount of Li-ion insertion to TiS₂ and hence the maximum recovery with the photocharging, as further confirmed by the experiments. Apart from the demonstration of solar solid-state batteries, the charging of lithium-ion full cell with light indicates the formation of lithium intercalated graphite compounds, ensuring the charging of the battery without any other parasitic reactions at the electrolyte or electrode-electrolyte interfaces. Possible mechanisms proposed here for the charging and discharging processes of solar batteries, based on the experimental and theoretical results, indicate the potential of such systems in the forthcoming era of renewable energies.     

Stereolithographic 3D Printing of Ceramics: Challenges and Opportunities for Structural Integrity

This article reviews the current activities at the Montanuniversität Leoben on the design, processing, and characterization of 3D printed advanced ceramics using the lithography-based manufacturing technology. An overview of the challenges and the opportunities offered to improve the mechanical properties of printing ceramics is given. Their brittle failure is analyzed within the framework of linear elastic fracture mechanics, considering specific aspects of additive manufacturing. Several issues associated with the printing process are addressed, such as surface quality, geometry control, influence of printing directions, as well as the need to establish testing protocols for 3D printed parts. Based on the layer-by-layer capabilities of the stereolithographic process, bio-inspired material design concepts are discussed aiming to enhance the mechanical resistance of 3D-printed ceramics. By tailoring the layer architecture and microstructure of the parts, high strength and fracture resistance may be achieved.     

Influence of adhesive fillets on fatigue behaviour of single-strap composite repairs

The objective of this work is to analyse the influence of adhesive fillets on the fatigue/fracture behaviour of single-strap adhesive repairs of carbon-epoxy composites. A cohesive zone model (CZM) appropriate for high-cycle fatigue analysis was employed. A preliminary model validation was performed using results ensuing from experimental testing of single-strap adhesive repairs without fillets. Subsequently, the numerical model was used to investigate the effect of outer, inner and both (outer and inner) fillets on the quasi-static strengths and on the fatigue lives of these repairs. It was concluded that inner fillets provide the best option concerning the increase of fatigue life or a maximum fatigue load for a given planned service-life of the repaired component.