Review of failure criteria of fibrous composite materials

Composite materials exhibit various and complex failure behavior. Different formalisms have been used to predict failure. Improvement of old theories and new ones continue to be published. In this paper, the most recent and widely used models are presented. Failure criteria such as Tsai-Wu, parametric formulations, maximal stress and strain, Hashin criterion, Hart-Smith criterion, and the method based on kriging are presented. These failure theories may be classified in two categories, depending whether they integrate failure modes or not. The formalism of each theory is briefly described and their application to model failure of composite laminates is discussed by comparing the advantages and limitations of each method. The diversity of experimental failure envelopes, as reported in the literature on composites, is outlined and it is shown that most criteria permit modeling only particular failure properties of composite laminates.     

Intralesional Infiltrations of Arteriosclerotic Tissue Cells-Free Filtrate Reproduce Vascular Pathology in Healthy Recipient Rats

Lower-extremity arterial disease is a major health problem with increasing prevalence, often leading to non-traumatic amputation, disability and mortality. The molecular mechanisms underpinning abnormal vascular wall remodeling are not fully understood. We hypothesized on the existence of a vascular tissue memory that may be transmitted through soluble signaling messengers, transferred from humans to healthy recipient animals, and consequently drive the recapitulation of arterial wall thickening and other vascular pathologies. We examined the effects of the intralesional infiltration for 6 days of arteriosclerotic popliteal artery-derived homogenates (100 µg of protein) into rats’ full-thickness wounds granulation tissue. Animals infiltrated with normal saline solution or healthy brachial arterial tissue homogenate obtained from traumatic amputation served as controls. The significant thickening of arteriolar walls was the constant outcome in two independent experiments for animals receiving arteriosclerotic tissue homogenates. This material induced other vascular morphological changes including an endothelial cell phenotypic reprogramming that mirrored the donor’s vascular histopathology. The immunohistochemical expression pattern of relevant vascular markers appeared to match between the human tissue and the corresponding recipient rats. These changes occurred within days of administration, and with no cross-species limitation. The identification of these “vascular disease drivers” may pave novel research avenues for atherosclerosis pathobiology.     

Hydrolytic stability of terephthaloyl chloride and isophthaloyl chloride

The phthaloyl chloride isomers, terephthaloyl chloride (TCl) and isophthaloyl chloride (ICl), are high production volume chemicals used in polymers to impartflame resistance, chemical resistance, and temperature stability and as water scavengers. In these studies, we determined the hydrolytic stability of TCl and ICl and their hydrolysis products in aqueous solutions. Hydrolysis rates for TCl and ICl were initially determined by gas chromatography/flame ionization detection in water buffered at pH 4.0, 7.0, and 9.0 and 0 degrees C for up to 30 min. Subsequent studies determined the products from TCl and ICl hydrolysis. The parent phthaloyl chlorides (TCl and ICl), their intermediate hydrolysis products (designated as the "half-acids"), and their stable hydrolysis products (terephthalic acid (TPA) and isophthalic acid (IPA)) were determined by high-performance liquid chromatography. The half-lives (t(1/2)) of TCl and ICl ranged from an average of 1.2 to 2.2 min and from 2.2 to 4.9 min, respectively, at pH 4-9 and 0 degrees C. The observed first-order rate constants (k(obs)) ranged from an average of 530 to 1100 (x 10(5) s(-1)) for TCl and 240 to 520 (x 10(5) s(-1)) for ICl. Both phthaloyl chlorides formed their respective short-lived intermediates, in which one of the two carboxylic acid chloride functionalities reacts with water to form the carboxylic acid ("half-acid"). Subsequently, the half-acids underwent further hydrolysis so that greater than 90% of the initial phthaloyl chloride hydrolyzed in less than 60 min at 0 degrees C. The hydrolysis products TPA and IPA were hydrolytically stable, undergoing no further transformations after 20 min at pH 7 and 25 degrees C. This work demonstrated that TCl, ICl, and their respective half-acids will not be persistent in aqueous systems for a time sufficient to have a sustained toxicological effect on aquatic organisms (less than 1 h). Performing additional aquatic toxicity studies, biodegradation studies, and potentially mammalian studies on TCl and ICl are unnecessary since the existing information on TPA and IPA with the hydrolysis data presented here is sufficient to address questions on the fate and effects of these two substances in aqueous environments.     

Glycation of the Major Milk Allergen β‐Lactoglobulin Changes Its Allergenicity by Alterations in Cellular Uptake and Degradation

1 Scope

During food processing, the Maillard reaction (МR) may occur, resulting in the formation of glycated proteins. Glycated proteins are of particular importance in food allergies because glycation may influence interactions with the immune system. This study compared native and extensively glycated milk allergen β‐lactoglobulin (BLG), in their interactions with cells crucially involved in allergy.

2 Methods and results

BLG was glycated in MR and characterized. Native and glycated BLG were tested in experiments of epithelial transport, uptake and degradation by DCs, T‐cell cytokine responses, and basophil cell degranulation using ELISA and flow cytometry. Glycation of BLG induced partial unfolding and reduced its intestinal epithelial transfer over a Caco‐2 monolayer. Uptake of glycated BLG by bone marrow–derived dendritic cells (BMDC) was increased, although both BLG forms entered BMDC via the same mechanism, receptor‐mediated endocytosis. Once inside the BMDC, glycated BLG was degraded faster, which might have led to observed lower cytokine production in BMDC/CD4⁺ T‐cells coculture. Finally, glycated BLG was less efficient in induction of degranulation of BLG‐specific IgE sensitized basophil cells.

3 Conclusions

This study suggests that glycation of BLG by MR significantly alters its fate in processes involved in immunogenicity and allergenicity, pointing out the importance of food processing in food allergy.     

Factors influencing quantities of sugars and organic acids in blackcurrant concentrates

 Use of endogenous non-volatile flavour components, i. e. sugars and organic acids, in fruit juice products is desirable. A study of 133 blackcurrant concentrates from three seasons examined variation in sugars and acids arising from storage of fruit at freezing or sub-ambient temperature, seasonal differences, geographical origin and choice of conventional thermal-evaporative or freeze concentration technology. Compared with freeze concentrates, conventional concentrates had significantly higher contents of total sugars and acids, notably malic acid, and higher fructose/glucose, lower malic/citric acid and similar sugar/acid ratios. Concentrates from frozen fruit generally had smaller amounts of fructose, total sugars and fructose/glucose ratios than those from fresh fruit, as well as less citric, ascorbic and total acids and lower sugar/acid ratios. Principal component analysis of 40 randomly chosen concentrates showed that variance is dominated by differences in fructose, total sugars and ascorbic acid contents and sugar/acid ratios. Geographical origin and concentration technology were major sources of variance but changes in post-production sub-ambient storage could not be excluded. Received: 4 July 1997 /  Revised version: 14 October 1997     

Dispersion modeling of polycyclic aromatic hydrocarbons from combustion of biomass and fossil fuels and production of coke in Tianjin, China

A USEPA, procedure, ISCLT3 (Industrial Source Complex Long-Term), was applied to model the spatial distribution of polycyclic aromatic hydrocarbons (PAHs) emitted from various sources including coal, petroleum, natural gas, and biomass into the atmosphere of Tianjin, China. Benzo[a]pyrene equivalent concentrations (BaPeq) were calculated for risk assessment. Model results were provisionally validated for concentrations and profiles based on the observed data at two monitoring stations. The dominant emission sources in the area were domestic coal combustion, coke production, and biomass burning. Mainly because of the difference in the emission heights, the contributions of various sources to the average concentrations at receptors differ from proportions emitted. The shares of domestic coal increased from approximately 43% at the sources to 56% at the receptors, while the contributions of coking industry decreased from approximately 23% at the sources to 7% at the receptors. The spatial distributions of gaseous and particulate PAHs were similar, with higher concentrations occurring within urban districts because of domestic coal combustion. With relatively smaller contributions, the other minor sources had limited influences on the overall spatial distribution. The calculated average BaPeq value in air was 2.54 +/- 2.87 ng/m3 on an annual basis. Although only 2.3% of the area in Tianjin exceeded the national standard of 10 ng/m3, 41% of the entire population lives within this area.     

Emission of polycyclic aromatic hydrocarbons in China by county

Quantitative relationships among social, economic, and climate parameters, and energy consumption for Chinese provinces, provide data for regression models' estimated rates of energy consumption and emission of polycyclic aromatic hydrocarbons (PAHs) by county. A nonlinear model was used for domestic coal combustion with total population and annual mean temperature as independent variables. Linear regression models were utilized for all other types of fuel consumption. Monte Carlo simulation demonstrated that emission factors, rather than the regression modeling, constitute the main source of uncertainty in prediction. Models were validated using available energy data of several northern and southern counties of China from the literature. The total PAHs produced by each county is approximately equivalent to the sum of the total emission from energy, coke, and aluminum production.     

The metabolism of linoleic and arachidonic acids in rat testis

Linoleic and arachidonic acids, labeled with¹⁴C and injected intratesticularly, were used to study with time the interconversion of polyunsaturated fatty acids in rat testis and their incorporation into the major lipid classes. With both substrates¹⁴C activity was readily incorporated into longer chain, more highly unsaturated fatty acids. After the injection of 1-¹⁴C-linoleic acid the major portion of the¹⁴C was found in palmitic, linoleic, 8,11,14-eicosatrienoic, 5,8,11,14-eicosatetraenoic, 7,10,13,16-docosatetraenoic and 4,7,10,13,16-docosapentaenoic acids. Hydrogenation of the total fatty acids isolated from rat testes after intratesticular injection of 1-¹⁴C-linoleate revealed that the polyenoic acids hydrogenating to lignoceric acid (previously characterized as 9,12,15,18-tetracosatetraenoate and 6,9,12,15,18-tetracosapentaenoate) had a relatively high specific activity. After the injection of 1-¹⁴C-arachidonate significant¹⁴C activity was found in palmitate, 7,10,13,16-docosatetraenoate, 4,7,10,13,16-docosapentaenoate, 9,12,15,18-tetracosatetraenoate and 6,9,12,15,18-tetracosapentaenoate. The biosynthesis of the ω⁶ polyunsaturated fatty acids in rat testis is discussed in relation to these data. Investigation of the distribution of label in the complex lipid fractions demonstrated the majority of the¹⁴C activity to be present in phosphatides and triglycerides after injection of either of these¹⁴C substrates with only small quantities being present as nonesterified acids. At the time periods studied the polyenoic acids of triglycerides had a higher specific activity than the corresponding acids of phosphatides with the exception of linoleate. Presented in part at the Meeting of the American Institute of Nutrition, Atlantic City, April 1968 and at the AOCS Meeting in New York, April 1969. These data were taken from a thesis submitted by R. B. Bridges in partial fulfillment of the requirements for the Ph.D. degree, Vanderbilt University.     

High-Toughness Silicon Carbide as Armor

Silicon carbide, with single-edge precracked beam (SEPB) toughness greater than 7 MPa·m^1/2, was made by hot-pressing using Al–B–C (ABC) or Al–Y₂O₃ (YAG) as additives. The hardness of SiC processed with a liquid phase was always less than SiC densified without a liquid phase despite having a similar or finer grain size. With increasing Al content, the ABC system changed from trans- to intergranular fracture with a drop in hardness and a two- to threefold increase in SEPB toughness. Strength and Weibull modulus for materials processed with a liquid phase were higher than those of solid-state densified SiC. Ballistic testing, however, did not show any improvement over SiC densified with B and C additives. Depth of penetration was controlled by hardness of the SiC-based materials, while V ₅₀ values for 14.5 mm WC–Co cored projectiles were in the range of 720–750 m/s for all materials tested.