TCP Performance in IEEE 802.11-Based Ad Hoc Networks with Multiple Wireless Lossy Links

We propose a packet-level model to investigate the impact of channel error on the transmission control protocol (TCP) performance over IEEE-802.11-based multihop wireless networks. A Markov renewal approach is used to analyze the behavior of TCP Reno and TCP Impatient NewReno. Compared to previous work, our main contributions are listed as follows: 1) modeling multiple lossy links, 2) investigating the interactions among TCP, Internet Protocol (IP), and media access control (MAC) protocol layers, specifically the impact of 802.11 MAC protocol and dynamic source routing (DSR) protocol on TCP throughput performance, 3) considering the spatial reuse property of the wireless channel, the model takes into account the different proportions between the interference range and transmission range, and 4) adopting more accurate and realistic analysis to the fast recovery process and showing the dependency of throughput and the risk of experiencing successive fast retransmits and timeouts on the packet error probability. The analytical results are validated against simulation results by using GloMoSim. The results show that the impact of the channel error is reduced significantly due to the packet retransmissions on a per-hop basis and a small bandwidth delay product of ad hoc networks. The TCP throughput always deteriorates less than ~ 10 percent, with a packet error rate ranging from 0 to 0.1. Our model also provides a theoretical basis for designing an optimum long retry limit for IEEE 802.11 in ad hoc networks.     

Geometry dependence of microstructure and microhardness for selective electron beam-melted Ti–6Al–4V parts

In an additive-manufactured metallic part, distinct and different microstructure and mechanical properties may exist in different areas due to differences in shape and location. Two parts, one with straight-finned structure and the other with curve-finned structure, were fabricated by the selective electron beam melting method using pre-alloyed Ti–6Al–4V ELI powder. Microstructural characterisation of these two parts that have varying fin thickness and shape was carried out to investigate the synthetical influence of 2D planar build geometry and in-fill hatching strategy on selective electron beam melting. It was found that the β interspacing is larger in the curve-finned structure, leading to a lower microhardness as compared to the straight-finned structure. It suggests a slower cooling rate in the curve-finned structure due to the differences in build geometry and in-fill hatching strategy.     

Determining the parametric effectiveness of a CAD model

The motivation for this paper is to present an approach for rating the quality of the parameters in a computer-aided design model for use as optimization variables. Parametric Effectiveness is computed as the ratio of change in performance achieved by perturbing the parameters in the optimum way, to the change in performance that would be achieved by allowing the boundary of the model to move without the constraint on shape change enforced by the CAD parameterization. The approach is applied in this paper to optimization based on adjoint shape sensitivity analyses. The derivation of parametric effectiveness is presented for optimization both with and without the constraint of constant volume. In both cases, the movement of the boundary is normalized with respect to a small root mean squared movement of the boundary. The approach can be used to select an initial search direction in parameter space, or to select sets of model parameters which have the greatest ability to improve model performance. The approach is applied to a number of example 2D and 3D FEA and CFD problems.     

Effects of computer-based educational achievement test on test performance and test takers’ motivation

There has been an increasing interest in recent years in developing and using computer-based tests in educational assessment. To replace paper-based tests with computer-based ones, the standards for developing computerized-assessment (International Test Commission., 2004) requires equivalent test scores to be established for the new computer-based test and the conventional paper-based test. However, in most test mode comparability studies, the actual test items used have been identical, and yet significant differences have been found in test scores in paper-based and computer-based modes. This has been reported for several subjects, including science, languages and mathematics. The validity of using computer-based tests in educational assessment must therefore be questioned. This study involves a biology test and a biology motivation questionnaire using a Solomon four-group experimental design to examine the validity of the computer-based test and its effects on test performance and the motivation of test-takers. The findings provide supportive evidence for the validity of computer-based test in educational assessment.     

Panorama of boron nitride nanostructures via lamp ablation

A diverse range of remarkable boron nitride (BN) nanostructures subsuming nano-horns, nano-rods, nano-platelets, and clusters of hollow nanospheres (nano-onions, arguably of greatest applied and fundamental interest) have been produced exclusively from crystalline BN precursor powder via lamp ablation. The procedure is safe, devoid of toxic reagents, simple, rapid and scalable—generating some genres of nanoparticles that had previously proved elusive. Product structure and composition were unambiguously assessed by high-resolution transmission electron microscopy, energy-dispersive X-ray spectroscopy and electron energy loss spectroscopy.

     

Influence of a high‐head dam as a dispersal barrier to fish community structure of the Upper Mississippi River

In river systems, high‐head dams may increase the distance‐decay of fish community similarity by creating nearly impermeable dispersal barriers to certain species from upstream reaches. Substantial evidence suggests that migratory species are impacted by dams, and most previous studies in stream/river networks have focused on small streams and headwaters. Here, we assess whether a high‐head dam (Lock and Dam 19; LD 19) on a large river, the Upper Mississippi River (UMR), substantially alters fish community structure relative to variability expected to occur independent of the dam's effect as a fish dispersal barrier. Using fish catch per unit effort data, we modelled the distance‐decay function for the UMR fish community and then estimated the similarity that would be expected to occur across LD19 and compared it with measured similarity. Measured similarity in the fish community above and below LD19 was close to the expected value based on the distance‐decay function, suggesting LD19 does not create an abrupt transition in the fish community. Although some migratory fish species no longer occur above LD19 (e.g., skipjack herring, Alosa chrysochloris), these species do not occur in high abundance below the dam and so do not drive variation in fish community structure. Instead, much of the variation in species structure is driven by the loss/gain of species across the latitudinal gradient. Lock and Dam 19 does not appear to be a clear transition point in the river's fish community, although it may function as a meaningful barrier for particular species (e.g., invasive species) and warrant future attention from a management perspective.     

Self-preservation of a heated square jet

This paper presents the velocity and temperature measurements of a heated jet issuing from a square nozzle into stagnant ambient air. Measurements were accomplished by means of hot-wire and cold-wire anemometers. Experimental results showed that the jet initial boundary layer was laminar. Based on the local maximum velocity and half-width, the interaction region was determined from 5De to 8De. It is found that the temperature has higher spreading rate and root mean square values than those of the velocity. It is thus suggested that the heated jet could enhance the mixing better.     

串联活性污泥系统处理制药废水工艺研究

通过小试模拟完全混合推流式活性污泥曝气池(串联CMAS工艺)处理哈尔滨某制药生产废水,优化实际工程的工艺运行参数,研究各污染物在系统中的去除特性.在F/M为0.1~0.2或0.8~1.5 gCOD/(gMLSS.d)、SRT为8~10 d、DO为1~3 mg/L、水温为27~34℃的运行条件下,串联CMAS工艺系统中污泥沉降性较好,对COD和TSS去除率分别大于90%和95%.活性污泥的平均比摄氧速率SOUR平均=49.5 mg/(gMLSS.h),表明串联CMAS曝气池中的污泥具有良好的活性.当水力停留时间HRT相同时,增加CMAS曝气池数有利于污泥沉降.该工艺对COD的生物降解规律遵循ρ(CODe)=ρ(COD0)×e-a t的数学模型.将模拟试验结论应用于实际工程的运行结果表明,该系统运行高效稳定,出水指标满足《污水综合排放标准(GB8978-1996)》的一级标准.