Antibacterial activities of essential oils and extracts of Turkish Achillea,Satureja and Thymus species against plant pathogenic bacteria

BACKGROUND: The aims of this study were to examine the chemical composition of the essential oils and hexane extracts of the aerial parts of Satureja spicigera (C. Koch) Boiss., Thymus fallax Fisch. & CA Mey, Achillea biebersteinii Afan, and Achillea millefolium L. by GC and GC–MS, and to test antibacterial efficacy of essential oils and n‐hexane, chloroform, acetone and methanol extracts as an antibacterial and seed disinfectant against 25 agricultural plant pathogens. RESULTS: Thymol, carvacrol, p‐cymene, thymol methyl ether and γ‐terpinene were the main constituents of S. spicigera and T. fallax oils and hexane extracts. The main components of the oil of Achillea millefolium were 1,8‐cineole, δ‐cadinol and caryophyllene oxide, whereas the hexane extract of this species contained mainly n‐hexacosane, n‐tricosane and n‐heneicosane. The oils and hexane extracts of S. spicigera and T. fallax exhibited potent antibacterial activity over a broad spectrum against 25 phytopathogenic bacterial strains. Carvacrol and thymol, the major constituents of S. spicigera and T. fallax oils, also showed potent antibacterial effect against the bacteria tested. The oils of Achillea species showed weak antibacterial activity. Our results also revealed that the essential oil of S. spicigera, thymol and carvacrol could be used as potential disinfection agents against seed‐borne bacteria. CONCLUSION: Our results demonstrate that S. spicigera, T. fallax oils, carvacrol and thymol could become potentials for controlling certain important agricultural plant pathogenic bacteria and seed disinfectant. Copyright © 2009 Society of Chemical Industry     

Extraction of cadmium from solutions containing various heavy metal ions by Amberlite LA-2

In present study, selective extraction of cadmium from acidic leach solutions, containing various heavy metal ions, by emulsion liquid membrane (ELM) is studied. For this reason, the zinc plant copper cake was leached with sulfuric acid and main acidic leach solution containing Zn(II), Cu(II), Fe(II), Cd(II), Co(II) and Ni(II) ions was obtained. After Zn(II), Cu(II), Fe(II) and Cd(II) ions in the acidic leach solution were separated, the important parameters influencing the extent of cadmium extraction were investigated and optimum conditions were determined. Cadmium extraction was influenced by number of parameters like initial metal ion concentration, mixing speed, phase ratio, extractant concentration, surfactant concentration, the stripping solution type and concentration, and the feed solution acid concentration. The optimum values of parameter above mentioned were used and cadmium in the acidic leach solution containing 650 mg Cd/L, 365 mg Co/L, 535 mg Ni/L, and 1260 mg Zn/L was almost completely extracted within 10 min. The results showed that it is possible to extract 99% of cadmium after 10 min contact time by using ELM from aqueous solutions, containing Fe(II), Al(III), Cu(II), Zn(II), Pb(II), Co(II) and Ni(II) ions, at the optimum operating conditions.     

Sustainable hydrogen production options and the role of IAHE

In this paper, some potential sustainable hydrogen production options are identified and discussed. There are natural resources from which hydrogen can be extracted such as water, fossil hydrocarbons, biomass and hydrogen sulphide. In addition, hydrogen can be extracted from a large palette of anthropogenic wastes starting with biomass residuals, municipal wastes, plastics, sewage waters etc. In order to extract hydrogen from these resources one needs to use sustainable energy sources like renewables and nuclear. A total of 24 options for sustainable hydrogen production are then identified. Sustainable water splitting is the most important method of hydrogen production. Five sustainable options are discussed to split water, which include electrolysis, high temperature electrolysis, pure and hybrid thermochemical cycles, and photochemical/radiochemical methods. Other 19 methods refer to extraction of hydrogen from other materials than water or in conjunction with water (e.g., coal gasification with CO₂ capture and sequestration). For each case the achievable energy and exergy efficiency of the method were estimated based on state of the art literature screening for each involved process. In addition, a range of hydrogen production capacity is determined for each of the option. For a transition period to hydrogen economy nuclear or solar assisted coal gasification and fossil fuel reforming technologies – with efficiencies of 10–55% including CO₂ sequestration – should be considered as a viable option. Other “ready to be implemented” technology is hydro-power coupled to alkaline electrolysers which shows the highest hydrogen generation efficiency amongst all electrical driven options with 60–65%. Next generation nuclear reactors as to be coupled with thermochemical cycles have the potential to generate hydrogen with 40–43% energy efficiency (based on LHV of hydrogen) and 35–37% exergy efficiency (based on chemical exergy of hydrogen). Furthermore, recycling anthropogenic waste, including waste heat, waste plastic materials, waste biomass and sewage waters, shows also good potential as a sustainable option for hydrogen production. Biomass conversion to hydrogen is found as potentially the most efficient amongst all studied options in this paper with up to 70% energy efficiency and 65% exergy efficiency.     

Effects of random particle dispersion and size on the indentation behavior of SiC particle reinforced metal matrix composites

This study investigates the effects of particle size, volume fraction, random dispersion and local concentration underneath a spherical indenter on the indentation response of particle reinforced metal matrix Al 1080/SiC composites. The ceramic particles in certain sizes and volume fractions were randomly distributed through the composite structure in order to achieve a similar structure to an actual microstructure as possible. The particle size and volume fraction affected considerably indentation depths and deformed indentation surface profiles. The indentation depth increases with increasing particle size, but decreases with increasing particle volume fraction. The experimental indentation depths were in agreement with numerical indentation depths in case the local particle concentration effect is considered. The local particle concentration plays an important role on the peak indentation depth. For small particle sizes and large volume fractions the random particle distribution affects the deformed surface profiles as well as the indentation depths. However, its effect is minor on residual stress and strain distributions rather than levels in the indentation region.     

Academic favoritism at work: insider bias in Turkish national journals

Scientometrics - The study utilizes a unique dataset of 16,575 research papers published in 68 national Business and Economics journals to investigate editorial bias towards insiders in Turkish...     

Atomic Structures of Precipitates in Al–Mg–Si Alloys with Small Additions of Other Elements

In Al–Mg–Si alloys, additions of only a few weight percent of Mg and Si enable formation of hardening precipitates during heat treatment. The precipitation is complex and is influenced by chemical compositions and thermo‐mechanical treatment. Structural analysis at the atomic scale has played an important role for understanding the Al–Mg–Si system. This review paper gives a summary of the influence of elements on the precipitate structures of Al–Mg–Si alloys at the atomic scale. The structures are modified by small additions of different elements, but all the encountered precipitates are structurally connected with the Si network, except for the main hardening phase which exhibit a partially discontinuous Si network. The influence of the selected elements (Li, Cu, Zn, Ge, Ag, Ni, Co, and Au) is discussed in detail.

     

The chemical synthesis and characterizations of silver-doped polyaniline: role of silver–solvent interactions

Polymer Bulletin - In this work, we successfully synthesized silver-doped polyaniline (NPANI-Ag-X; X represents I− and BF4− dopants,) by using chemical oxidation polymerization in...     

Utilization of a very high lime fly ash for improvement of Izmir clay

This paper presents an investigation into the stabilization of a soft clay subgrade of a military zone in Izmir, Turkey with a very high lime fly ash. Zero%, 5%, 10%, 15% and 20% (m/m) of the soil was replaced with fly ash. In addition to the control specimen, four different stabilized soil samples were prepared mixing fly ash with soil at optimum water contents determined by standard proctor test. Experiments lasted for 3 months and the unconfined compressive strength and shear strength parameters, cohesion and internal friction angle, were determined after 1, 7, 28 and 90 days. It was found that, inclusion of fly ash improved the properties of the soil. The improvements, appearing with increasing fly-ash content, were attributed to the pozzolanic reaction and pore refinement effect of fly ash as well as its high free-lime content.     

Effects of project size and resource constraints on project duration through priority rule-base heuristics

Priority rules are one of the frequently used methods in project programming with resource-constraints. In this paper, the effects of project size and number of resource constraints on project duration are compared to the performances of pre-selected priority rules. Ten projects in different sizes have been programmed with 3, 5, 7, 9, and 11 limited-resource conditions by means of MRPL (Maximum Remaining Path Length), LFT (Latest Finish Time), MNSLCK (Minimum Slack Time), EFT (Earliest Finish Time), and LST (Latest Start Time) priority rules. When the number of resource constraints is low, the performance of MRPL is generally observed to be higher. As the number of resource constraints increases, a decrease in the performance of MRPL is observed in contrast with an increase in the performance of LFT.