Reducing the use of resources in medium-sized Swedish construction enterprises: production managers’ views

What construction firms do—and do not do—to reduce the use of resources in construction projects is explored by adopting production managers’ views of their firms’ onsite activities. A literature review and empirical data are combined; 15 production managers have been asked how they perceived their company’s compliance with 31 recommendations to reduce the use of resources. The managers perceived their firms to primarily focus on identifying their customers’ real needs, stimulating employees to undertake further education, and striving for long-term customer–supplier relationships. In contrast, they perceived that less attention was directed to making use of all of the week’s hours, to supporting their main suppliers in their development, and planning feedback and training after project completion. The use of resources is examined by focusing on the perceived low priority given to gathering information and knowledge, as well as to reducing time and the need for long-term relationships with customers in contrast to short-term relationships with suppliers. The managers adopted a project-specific approach mainly to the use of material resources. A more holistic view of resources could enable the development of novel solutions in construction.     

Estimating using cost significant global cost models

Cost significant models have been suggested as one way of overcoming criticisms of the amount of detail contained within the traditional bill of quantities. Recent research into these models reveals a lack of formal rules for the selection of work packages to be used within the models, and a potential to overestimate the cost of projects. This paper presents a methodology for selecting work packages, and recommends a refinement to the technique that reduces the variability in estimates produced using cost significance. Estimates are produced using both the traditional method of producing cost significant models, and a refined global cost methodology. Both techniques are tested against unpriced bills to measure the difference in results, with significant improvements being achieved with the new technique.     

Water Resources: The Delaware Basin

Philadelphia is in competition with New York City and Baltimore in staking a claim for the water resources it will need in the next half century and beyond. A new governmental organization having a delegation of both state and federal powers for continuous planning and for unified management and control of the water resources of the entire Delaware River Basin has been proposed; and a federal-state compact for its establishment is being negotiated.     

Polychlorinated naphthalenes in air and snow in the Norwegian Arctic: a local source or an Eastern Arctic phenomenon?

PCNs were measured in air and snow during separate field campaigns at Ny-Alesund (April 2001) and Troms? (February/March 2003) in the Norwegian Arctic. Air concentrations ranged from 27 to 48 and 9 to 47 pg sigmaPCN m(-3) for Ny-Alesund (n=6) and Troms? (n=10), respectively. These concentrations (including the tri-chlorinated naphthalenes) greatly exceeded concentrations previously measured in the Canadian Arctic, but did fall within the upper range of concentrations observed over the eastern Arctic Ocean and regional seas. Local sources appear to be affecting concentrations observed at both sites, with the presence of several hexa-chlorinated naphthalenes at Troms? probably attributed to local/regional sources. Use of air mass back trajectories at Troms? revealed that background air concentrations in the Norwegian Arctic are likely to range between <9 and 20 pg sigmaPCN m(-3) and that contemporary concentrations derived close to potential sources (i.e. arctic towns) may equal or exceed those of PCBs. The mean concentration in surface snow was 350 and 240 pg sigmaPCN L(-1) (meltwater) (or 0.014 and 0.01 pg g(-1) (snow)) at Ny-Alesund and Troms?, respectively. The wide variation in concentrations observed between fresh snowfalls could be explained by different snow densities (as a surrogate of snow surface area), rather than attributed to varying air concentrations. A statistically significant inverse relationship was found between snow density and concentrations of tri- to penta-chlorinated homologues and compliments similar findings for the polychlorinated biphenyls (PCBs). This suggests that the vapour-sorbed quantity changes rapidly with snow ageing/compaction; with implications for the fate of these chemicals in the Arctic.     

Continuous-flow metal biosorption in a regenerable Sargassum column

Metal biosorption behavior of raw seaweed S. filipendula in ten consecutive sorption-desorption cycles has been investigated in a packed-bed flow-through column during a continuous removal of copper from a 35mg/L aqueous solution at pH 5. The elutant used was a 1% (w/v) CaCl2/HCl-solution at pH 3. The sorption and desorption was carried out for an average of 85 and 15h, respectively, representing more than 41 days of continuous use of the biosorbent. The weight loss of biomass after this time was 21.6%. The Cu-biosorption capacity of the biomass, based on the initial dry weight, remained relatively constant at approximately 38 mg Cu/g. Loss of sorption performance was indicated by a shortening breakthrough time and a broadening mass-transfer zone. The column service time, considered up to 1 mg Cu/L in the effluent, decreased continuously from 25.4 h for the first to 12.7 h for the last cycle. The critical bed length, representing the mass-transfer zone, increased almost linearly from 28 to 34cm. "Life-factors" for S. filipendula were found to be 0.0008h(-1) for the breakthrough time and 0.008cm/h for the critical bed length, using an exponential decay and linear fitting functions, respectively. Regeneration with CaCl2/HCl at pH 3 provided elution efficiencies up to 100%. Maximum concentration factors were determined to be in the range 16-44, a decreasing tendency was observed with an increasing exposure time.     

Modelling air pollution for epidemiologic research--part II: predicting temporal variation through land use regression

Over recent years land use regression (LUR) has become a frequently used method in air pollution exposure studies, as it can model intra-urban variation in pollutant concentrations at a fine spatial scale. However, very few studies have used the LUR methodology to also model the temporal variation in air pollution exposure. The aim of this study is to estimate annual mean NO₂ and PM₁₀ concentrations from 1996 to 2008 for Greater Manchester using land use regression models. The results from these models will be used in the Manchester Asthma and Allergy Study (MAAS) birth cohort to determine health effects of air pollution exposure.The Greater Manchester LUR model for 2005 was recalibrated using interpolated and adjusted NO₂ and PM₁₀ concentrations as dependent variables for 1996-2008. In addition, temporally resolved variables were available for traffic intensity and PM₁₀ emissions. To validate the resulting LUR models, they were applied to the locations of automatic monitoring stations and the estimated concentrations were compared against measured concentrations.The 2005 LUR models were successfully recalibrated, providing individual models for each year from 1996 to 2008. When applied to the monitoring stations the mean prediction error (MPE) for NO₂ concentrations for all stations and years was -0.8 μg/m³ and the root mean squared error (RMSE) was 6.7 μg/m³. For PM₁₀ concentrations the MPE was 0.8 μg/m³ and the RMSE was 3.4 μg/m³.These results indicate that it is possible to model temporal variation in air pollution through LUR with relatively small prediction errors. It is likely that most previous LUR studies did not include temporal variation, because they were based on short term monitoring campaigns and did not have historic pollution data. The advantage of this study is that it uses data from an air dispersion model, which provided concentrations for 2005 and 2010, and therefore allowed extrapolation over a longer time period.     

Earthquake-induced net section fracture in brace connections — experiments and simulations

Results from six tests, finite element simulations and a synthesis of previous test programs on slotted end bracing connections are presented. The main objective of the research is to examine the deformation capacity of these connections, with the ultimate objective of minimizing the requirement for net section reinforcement that is often inconvenient from the perspective of fabrication. The experiments and simulations feature commonly used pipe specimens and end details. The main parameters investigated include the gusset plate thickness, the slot length and introduction of a wrap-around weld that eliminates the reduced section at the edge of the gusset plate. The results indicate that even without reinforcement, the connections offer adequate to excellent deformation capacity if they are provided with the wrap-around weld or if the net section strength is larger than the gross yield strength. This may be achieved in situations where shear lag in the connection is minimal, and where the area reduction due to the slot is small relative to the gross area. Design considerations are presented along with limitations of the study.     

Human response to blast-induced vibration and air-overpressure: an Indian scenario

Ground vibration (V_max) and air-overpressure/noise (p) are some of the negative effects of blasting. The associated human annoyance and complaints are expected to show an increasing trend in the future as there is no economically viable alternative to blasting in mines in India.A study of the human response to blasting in four mining localities across India has shown that the response is not simply political, as frequently assumed. It has been found that irrespective of those questioned, a basic concern for the safety of property was the main response. There was a greater response from the middle-aged and middle-educated while fewer women than men responded. Assuming that a 100% negative response from the inhabitants will translate into complaints, a methodology is suggested to take account of the human response criteria when considering blasting within 400 m of habitations.     

CROSS - a Program for Determination of Coefficients of Subgrade Reaction

Soil Mechanics and Foundation Engineering -