Near‐Infrared Intraoperative Chemiluminescence Imaging

Intraoperative imaging technologies recently entered the operating room, and their implementation is revolutionizing how physicians plan, monitor, and perform surgical interventions. In this work, we present a novel surgical imaging reporter system: intraoperative chemiluminescence imaging (ICI). To this end, we have leveraged the ability of a chemiluminescent metal complex to generate near‐infrared light upon exposure to an aqueous solution of Ce⁴⁺ in the presence of reducing tissue or blood components. An optical camera spatially resolves the resulting photon flux. We describe the construction and application of a prototype imaging setup, which achieves a detection limit as low as 6.9 pmol cm^?2 of the transition‐metal‐based ICI agent. As a proof of concept, we use ICI for the in vivo detection of our transition metal tracer following both systemic and subdermal injections. The very high signal‐to‐noise ratios make ICI an interesting candidate for the development of new intraoperative imaging technologies.     

Time‐resolved investigation of Cu(In,Ga)Se2 growth and Ga gradient formation during fast selenisation of metallic precursors

Ga segregation at the backside of Cu(In,Ga)Se₂ solar cell absorbers is a commonly observed phenomenon for a large variety of sequential fabrication processes. Here, we investigate the correlation between Se incorporation, phase formation and Ga segregation during fast selenisation of Cu–In–Ga precursor films in elemental selenium vapour. Se incorporation and phase formation are analysed by real‐time synchrotron‐based X‐ray diffraction and fluorescence analysis. Correlations between phase formation and depth distributions are gained by interrupting the process at several points and by subsequent ex situ cross‐sectional electron microscopy and Raman spectroscopy. The presented results reveal that the main share of Se incorporation takes place within a few seconds during formation of In–Se at the top part of the film, accompanied by outdiffusion of In out of a ternary Cu–In–Ga phase. Surprisingly, CuInSe₂ starts to form at the surface on top of the In–Se layer, leading to an intermediate double graded Cu depth distribution. The remaining Ga‐rich metal phase at the back is finally selenised by indiffusion of Se. On the basis of a proposed growth model, we discuss possible strategies and limitations for the avoidance of Ga segregation during fast selenisation of metallic precursors. Solar cells made from samples selenised with a total annealing time of 6.5 min reached conversion efficiencies of up to 14.2 % (total area, without anti‐reflective coating). The evolution of the Cu(In,Ga)Se₂ diffraction signals reveals that the minimum process time for high‐quality Cu(In,Ga)Se₂ absorbers is limited by cation ordering rather than Se incorporation. Copyright © 2014 John Wiley & Sons, Ltd.     

A monolithically integrated high‐efficiency Cu(In,Ga)Se2 mini‐module structured solely by laser

Monolithically integrated Cu(In,Ga)Se₂ mini‐modules were fabricated in order to reduce the width of patterning related dead area. The Cu(In,Ga)Se₂ layers were prepared on soda‐lime glasses using the multistage process at low substrate temperature below 500 °C. A picosecond laser with a wavelength of 532 nm was used for all of the structuring processes (P1, P2, and P3) for the monolithic integration. A “lift‐off” type structuring was applied for P1 and P3, and an “ablation” type was for P2. The laser structuring was optimized to be minimizing the dead area width, and the width of about 70 µm was successfully achieved. A mini‐module, in which the optimized structuring processes were applied for the integration, demonstrated a certified efficiency of 16.6%. Copyright © 2015 John Wiley & Sons, Ltd.     

Kuppelproduktion und Umweltpolitik: Eine Fallstudie zur Chlorchemie und zur Schwefelsäureindustrie

Joint Production and Environmental Policy: A Case Study for the Chlorine and Sulphuric Acid Industry The chemical industry is a key sector of industrialised economy. Thus, environmental policy with a focus on the chemical industry is likely to affect the economy as a whole. In this article we show, that environmental regulation of the chemical industry has major consequences for other production sectors. Two major problem areas of the chemical industry are considered: the chlorine industry and the sulphur industry. While the chlorine industry can cope with environmental legislation by process and product innovation without a substantial impact on other sectors, this is not the case with the sulphur industry. The production of its key product, sulphuric acid, utilises joint products of other sectors as inputs. The chemical industry offers these sectors the possibility to dispose of their unwanted by-products. Environmental policy, directed towards a reduction of sulphuric acid is likely to cause a waste disposal problem in sectors which manufacture sulphur or sulphur dioxide as by-products. Solving environmental problems within the chemical industry therefore creates new problems in other sectors.     

Spatial and temporal trends of perfluorinated compounds in Beluga Whales (Delphinapterus leucas) from Alaska

Wildlife from remote locations have been shown to bioaccumulate perfluorinated compounds (PFCs) in their tissues. Twelve PFCs, consisting of perfluorinated carboxylic (PFCA) and sulfonic (PFSA) acids as well as the perfluorooctane sulfonate (PFOS) precursor perfluorooctane sulfonamide (PFOSA), were measured in livers of 68 beluga whales (Delphinapterus leucas) collected from two subpopulations, Cook Inlet and eastern Chukchi Sea, in Alaska between 1989 and 2006. PFOS and PFOSA were the dominant compounds measured in both beluga stock populations, with overall median concentrations of 10.8 ng/g and 22.8 ng/g, respectively. Long-chain perfluorocarboxylates, PFCAs (9 to 14 carbons), were detected in more than 80% of the samples. Perfluoroundecanoic acid (PFUnA) and perfluorotridecanoic acid (PFTriA) made up a large percentage of the PFCAs measured with median concentrations of 8.49 ng/g and 4.38 ng/g, respectively. To compare differences in location, year, sex, and length, backward stepwise multiple regression models of the individual and total PFC concentrations were used. Spatially, the Cook Inlet belugas had higher concentrations of most PFCAs and PFOS (p < 0.05); however, these belugas had a lower median concentration of PFOSA when compared to belugas from the eastern Chukchi Sea (p < 0.05). Temporal trends indicated most PFCAs, PFHxS, PFOS, and PFOSA concentrations increased from 1989 to 2006 (p < 0.05). Males had significantly higher concentrations of PFTriA, ΣPFCA, and PFOS (p < 0.05). Perfluorononanic acid (PFNA) and PFOS showed a significant decrease in concentration with increasing animal length (p < 0.05). These observations suggest the accumulation of PFCs in belugas is influenced by year, location, sex, and length.     

Ein Stoffdaten-Informationssystem für die Chemische Technik

A physical property data bank for chemical engineering . DETHERM , a data bank for physical property data of chemical compounds and mixtures as required by chemical engineers is described, which allows the retrieval of literature data, the algebraic manipulation of retrieved data, data calculations and estimations, data analysis, and connection with data processing systems. In the data bank both numerical and non-numerical data are stored, data and substances being labeled by ?tags”? which characterize the kind of stored data and substances.     

In Vivo Metabolic Responses to Different Formulations of Amino Acid Mixtures for the Treatment of Phenylketonuria (PKU)

Phenylketonuria (PKU) is a rare autosomal recessive inborn error of metabolism where the mainstay of treatment is a Phe restricted diet consisting of a combination of limited amounts of natural protein with supplementation of Phe-free or low-Phe protein substitutes and special low protein foods. Suboptimal outcomes may be related to the different absorption kinetics of free AAs, which have lower biological efficacy than natural proteins. Physiomimic Technology^TM is a technology engineered to prolong AA (AA-PT) release allowing physiological absorption and masking the odor and taste of free AAs. The aim of these studies was to assess the impact of AA-PT formulation on selected functional and metabolic parameters both in acute and long-term experimental studies. Adult rats in fasting conditions were randomized in different groups and treated by oral gavage. Acute AA-PT administration resulted in significantly lower BUN at 90 min versus baseline. Both BUN and glycemia were modulated in the same direction as intact casein protein. Long-term treatment with AA-PT significantly reduces the protein expression of the muscle degradation marker Bnip3L (−46%) while significantly increasing the proliferation of market myostatin (+58%). Animals dosed for 15 days with AA-PT had significantly stronger grip strength (+30%) versus baseline. In conclusion, the results suggest that the AA-PT formulation may have beneficial effects on both AA oxidation and catabolism with a direct impact on muscle as well as on other metabolic pathways.     

New concepts for lithium minerals processing

A new concept for the enrichment of lithium minerals is offering higher purity and higher yield by applying new processing technologies addressing the specific properties of the pegmatitic host rock. Additional value is created from high quality by-products which will improve the sustainability of mining activity and the overall cost base. Within the new concept, flotation may even be avoided where wet separation techniques are not applicable.Two innovative processing technologies have been integrated in the new concept: electrodynamic fragmentation and optical sorting. Detailed results of lab-technical tests show that the new process design can achieve highly selective liberation and separation processes. Optical and mineralogical analyses of the test products indicate a high benefit for commercial applications.