Long-term effect of diesel degradation on polyoxymethylene at different temperatures

Diesel is an important fuel, partly because of the longevity and cleanliness of diesel engines. Often, polymers are in direct contact with diesel and understanding compatibility is critical. Polyoxymethylene (POM) is a thermoplastic used to manufacture automotive fuel pump gears and rotors due to its low coefficient of friction and thermal and dimensional stability. In this study, tensile tests were performed on plain and glass fiber reinforced (POM and POMGF) after immersion in diesel at different temperatures (−10°C, 23°C, and 60°C) for 1000, 2000, 3000, 5000, and 10 000 hour. A mathematical model was developed using data from just three tensile stress-strain curves obtained at two different fluid temperatures and three different immersion times. Model and experimental results show good agreement with one another for all conditions tested.     

Why quality of life measures should be used in the treatment of patients with respiratory illness

Treatment of airways disease is directed towards improving patients' health and well-being. Measurements of airways function do not reflect all the disease activity present in the airways that may affect the patient. Spirometry correlates poorly with health. Physicians appear to estimate their patients' health using criteria different from the patients themselves. Quality of life questionnaires provide a method of quantifying the effect of disease on patients' lives. They can summarize a number of aspects of the disease and provide an overall estimate of the effect of disease and benefits due to therapy. They have the potential to identify a threshold response to treatment that may be considered "worthwhile", and allow comparison between therapies with respect to the health gain that each provides.     

Arthroscopic Bankart repair with the Suretac device. Part I: Clinical observations

Although arthroscopic Bankart repair has become an accepted surgical stabilization technique for anterior shoulder instability, the failure rate remains unacceptably high. Little information is available concerning healing of the Bankart repair. The purpose of this article is to clarify this issue by analyzing a cohort of 15 patients who underwent a "second-look" arthroscopy to evaluate and treat pain or recurrent instability following arthroscopic Bankart repair with the Suretac device (Acufex Microsurgical, Mansfield, MA). "Second-look" arthroscopy was performed at an average of 9 months following the index surgical procedure. The reasons for this second surgery were recurrent instability in 7, pain in 6, and pain and stiffness in 2. In the 7 patients with recurrent instability, the Bankart repair was found to be completely healed in 3 (43%), partially healed in 1 (14%), and had recurred in 3 (43%); however, 6 of 7 were observed to have lax capsular tissue. In 4 of these cases, retrospective review of the index surgical procedure showed that a technical error had been made during the repair. Two cases had biopsy of the repair site on "second-look" at 6 to 8 months, and this showed residual polyglyconate polymer debris surrounded by a histiocytic infiltrate. In the remaining 8 cases with stable shoulders, the Bankart repair had completely healed in 5 cases (62.5%) and partially healed in 3 cases (37.5%). The higher failure rate with this approach compared with open approaches appears to result from improper patient selection and errors in surgical technique. There is some question concerning healing strength of the Bankart repair, although complete healing of the Bankart does not seem to be a prerequesite for shoulder stability. Success of the procedure might be expected to improve by selecting only patients with unidirectional, posttraumatic, anterior instability who are found to have a discrete Bankart lesion and well-developed ligamentous tissue.     

Liquid phase sintering of hydroxyapatite by phosphate and silicate glass additions: structure and properties of the composites

Phosphate- and silicate-based glasses were added to hydroxyapatite in order to improve its mechanical properties and to fabricate composites with different degrees of bioactivity. A strong chemical bonding was obtained between hydroxyapatite and the phosphate-based glasses leading to samples approaching theoretical density, according to density measurements and scanning electron microscopy. Bioglass^® additions led to the formation of a complex calcium phosphate silicate which hampered the reinforcement process. The fracture toughness of the hydroxyapatite-glass composites was shown to be within the 1.1–1.2 MPam^1/2 range, which is double that determined for sintered hydroxyapatite. A 2 m thick apatite layer was observed on the surface of the hydroxyapatite-glass composites after 48 h immersion in a simulated human blood plasma, whereas only a few apatite crystals were detected on sintered hydroxyapatite after 7 days immersion. From the results obtained we anticipate that the composites might show a higher rate of bone bonding, leading to enhanced bioactivity.     

A biased random‐key genetic algorithm for OSPF and DEFT routing to minimize network congestion

Interior gateway routing protocols like Open Shortest Path First (OSPF) and Distributed Exponentially Weighted Flow Splitting (DEFT) send flow through forward links toward the destination node. OSPF routes only on shortest‐weight paths, whereas DEFT sends flow on all forward links, but with an exponential penalty on longer paths. Finding suitable weights for these protocols is known as the weight setting problem (WSP). In this paper, we present a biased random‐key genetic algorithm for WSP using both protocols. The algorithm uses dynamic flow and dynamic shortest path computations. We report computational experiments that show that DEFT achieves less network congestion when compared with OSPF, while, however, yielding larger delays.     

Adaptive quasi-interpolating quartic splines

We present an adaptive quasi-interpolating quartic spline construction for regularly sampled surface data. The method is based on a uniform quasi-interpolating scheme, employing quartic triangular patches with C ¹-continuity and optimal approximation order within this class. Our contribution is the adaption of this scheme to surfaces of varying geometric complexity, where the tiling resolution can be locally defined, for example driven by approximation errors. This way, the construction of high-quality spline surfaces is enhanced by the flexibility of adaptive pseudo-regular triangle meshes. Numerical examples illustrate the use of this method for adaptive terrain modeling, where uniform schemes produce huge numbers of patches.     

Locally perceiving hard global constraints in multi-agent scheduling

We propose how to model enterprise facilities (like factories, warehouses, etc.) in a multi-product production/distribution network, capacity management at those facilities, and scheduling agents which act as enterprise managers, taking decisions that affect the available capacity. A coordination mechanism through which scheduling agents can locally perceive hard global temporal constraints is also proposed.     

Volatilization of hydrogen sulfide from a quiescent surface

Air-water mass transfer of hydrogen sulfide from a shallow tank with a quiescent surface under the influence of weak wind stress on the water surface was studied numerically using a two-dimensional model. The flow field in the tank was investigated using a computational code based on a finite volume, which is used to numerically solve momentum, mass and continuity conservation equations. The results show that water phase flow field is strongly dependent on the wind-induced surface velocity and the aspect ratio of the tank. Based on the numerical study, the liquid-side mass transfer coefficient is correlated with Reynolds number (R(e)), tank aspect ratio (AR) and Schmidt number (S(c)). Overall mass transfer coefficient (K(L)) values extend further downstream as the R(e) number increases.