Detection of a Specific Biomarker for Epstein-Barr Virus Using a Polymer-Based Genosensor

This paper describes methodology for direct and indirect detections of a specific oligonucleotide for Epstein-Barr virus (EBV) using electrochemical techniques. The sequence of oligonucleotide probe (EBV1) revealed a high sequence identity (100%) with the EBV genome. For the development of the genosensor, EBV1 was grafted to the platform sensitized with poly(4-aminothiophenol). After that, the hybridization reaction was carried out with the complementary target (EBV2) on the modified electrode surface using ethidium bromide as DNA intercalator. The oxidation peak currents of ethidium bromide increased linearly with the values of the concentration of the complementary sequences in the range from 3.78 to 756 μmol·L⁻¹. In nonstringent experimental conditions, this genosensor can detect 17.32 nmol·L⁻¹ (three independent experiments) of oligonucleotide target, discriminating between complementary and non-complementary oligonucleotides, as well as differentiating one-base mismatch, as required for detection of genetic diseases caused by point mutations. The biosensor also displayed high specificity to the EBV target with elimination of interference from mix (alanine, glucose, uric acid, ascorbic acid, bovine serum albumin (BSA), glutamate and glycine) and good stability (120 days). In addition, it was possible to observe differences between hybridized and non-hybridized surfaces through atomic force microscopy.     

Thermo-reversible sol–gel transition of TiO2 nanoparticles with surface modified by p-toluene sulfonic acid

In this paper an unprecedent thermo-reversible sol–gel transition for titania nanoparticles dispersed in a solution of p-toluene sulfonic acid (PTSH) in isopropanol is reported. The sol formed by the thermo-hydrolysis at 60 °C of titanium tetraisopropoxide (Ti(OⁱPr)₄) reversibly changes into a turbid gel upon cooling to room temperature. Turbidimetric measurements performed for samples containing different nominal acidity ratios (A = [PTSH]/[Ti]) have evidenced that the gel transformation temperature increases from 20 to 35 °C as the [PTSH]/[Ti] ratio increases from 0.2 to 2.0. SAXS results indicate that the thermo-reversible gelation is associated to a reversible aggregation of a monodisperse set of titania nanoparticles with average gyration radius of ≈2 nm. From the different PTSH species evidenced by Raman spectroscopy and TG/DTA of dried gels we proposed that the thermo-reversible gelation in this systems is induced by the formation of a supramolecular network, in which the protonated surface of nanoparticles is interconnected through cooperative hydrogen bonds between –SO₃ groups of p-toluene sulfonic acid.     

In vivo assessment of the corrosion of nickel–titanium orthodontic archwires by using scanning electron microscopy and atomic force microscopy

This study was undertaken to assess in vivo the corrosion in two commercial nickel–titanium (NiTi) orthodontic archwires removed from the oral cavity of patients using fluoride mouthwashes. Five volunteers took part in this study on the corrosion behavior of two brands of NiTi archwires (3M and AO (brand of archwire)) during use of two mouthwashes with neutral sodium fluoride 1.1%, one with acidulated fluoride 1.1%, and one with placebo and a control group. Each patient used one mouthwash in three different periods of time for 1 min a day for 30 days. The archwires were assessed with scanning electron microscopy and atomic force microscopy for qualitative and quantitative analysis. The values obtained with atomic force microscopy (AFM) were submitted to normality test, two‐way analysis of variance, and Tukey's test at a significance level of 5%. The AFM images showed a gradual qualitative increase in the roughness of both types of wire between the treatments: control < placebo < neutral fluoride < acidulated fluoride. The arithmetic average of the roughness and root mean square of the roughness were similar. As for 3M archwires, only the acidulated fluoride group differed statistically from the others. As for AO archwires, the control and placebo groups did not differ from each other, but differed from the other fluoride treatments. The group using neutral fluoride also differed significantly from the acidulated fluoride group. 3M archwires were not affected by daily oral challenges. AO archwires were not affected by daily oral challenges either; their association with fluoride, either neutral or acidulated, increased their roughness.     

High exposure to arsenic from drinking water at several localities in eastern Croatia

This study investigated the relationship between arsenic concentrations in drinking water in four towns/villages in eastern Croatia and corresponding hair arsenic concentrations of residents. The mean arsenic concentrations in community drinking water samples were 0.14, 37.88, 171.60, and 611.89 microg/l. The corresponding mean concentrations of the element in hair samples of subjects residing in each of the localities were 0.07 (n=11), 0.26 (n=17), 1.74 (n=11), and 4.31 microg/g (n=23). Chronic exposures to arsenic levels estimated in three investigated locations could present a serious health threat to around 3% of Croatian population.     

Computed microtomography evaluation of calcium hydroxide‐based root canal dressing removal from oval root canals by different methods of irrigation

The aim of this study was to evaluate the capacity of conventional irrigation, passive ultrasonic irrigation (PUI), and Easy Clean for removing calcium hydroxide‐based root canal dressing from oval root canals. Thirty mandibular uniradicular incisors with oval canals were used, and subjected to chemical–mechanical preparation with Reciproc R40 instruments. The main canal was filled with a paste based on Ca(OH)₂ P.A., iodoform and propylene glycol in the ratio of 3:1:1. The teeth were stored in 100% humidity at a temperature of 37°C for 14 days. Afterwards, the teeth were divided into three groups (n = 10) according to the method of irrigation used (conventional irrigation, PUI, and Easy Clean). The specimens were analyzed by computed microtomography at three time intervals: before placing the root canal dressing, with the root canal dressing in place, and after application of the irrigation methods for removing it. The data were submitted to Kruskal–Wallis and Dunn tests for analyzing the canal as a whole, and Friedman and Dunn for analyzing the root thirds. The results showed that conventional irrigation was less efficient for removing the root canal dressing in comparison with the methods that agitated the irrigant solution (p < .05). When the root canal was analyzed as a whole, Easy Clean, and PUI were similar (p > .05). In analysis of the thirds, Easy Clean was more efficient than conventional irrigation in all the thirds, while PUI showed this behavior only in the cervical third (p < .05). The authors concluded that in oval canals, none of the irrigation methods were capable of removing all the root canal dressing, however, the methods that agitated the irrigant solution were more efficient than conventional irrigation.     

Effect of in‐office bleaching agents on the surface roughness and morphology of different dental composites: An AFM study

The aim of this study was to evaluate, using atomic force microscopy, the effect of two different bleaching agents on the modification of dental composites materials. This modification will be judged by analyzing the variation of surface roughness and surface morphology of two different composites: one containing nanoparticles and other consisting of microhybrid resin. The bleaching was performed by using two different concentrations of hydrogen peroxide: HP Blue (20% hydrogen peroxide) and Whiteness HP Maxx (35% hydrogen peroxide). Disks of Esthet X and Filtek? Z350 composites were used. Atomic force microscopy was used for analyses of the same place of the sample before and after treatment. A total of 12 analyses were performed per group (n = 12). The samples were analyzed qualitatively by evaluating morphological changes in the images and quantitatively by using roughness parameters (Ra). Data were analyzed statistically using Kruskal–Wallis, Mann–Whitney, and Friedman tests (P < 0.05). Changes were observed both qualitatively and quantitatively only in the groups where Esthet X resin was used. The use of hydrogen peroxide bleaching agents caused changes only in the surface of microhybrid composites, with no changes being observed in the composite containing nanoparticles. Despite being even significant, these alterations are clinically slight and can be eliminated by polishing them. Microsc. Res. Tech. 76:481–485, 2013. © 2013 Wiley Periodicals, Inc.     

Electroreduction of laccase covalently bound to organothiol monolayers on gold electrodes

Cerrena unicolor laccase was immobilized on the gold electrode by covalent bonding to self-assembled monolayers of mercaptoundecanoic or mercaptopropionic acids. STM images of immobilized laccase proved high population of the laccase molecules on the monolayer modified electrode. The SERS experiments in concert with resonance Raman effect confirmed that the structure at the “blue” copper site of the immobilized protein remained intact. The accessibility of individual copper sites for electron exchange with the gold electrode surface was investigated by voltammetry. The electrode behavior of laccase is different in the presence and absence of oxygen, showing that the immobilized enzyme is reactive towards oxygen. Addition of two common mediators improved the electrical connectivity of the enzyme with the electrode, increased the catalytic efficiency of immobilized laccase and switched the onset of catalytic current to the potentials of the mediator. Immobilization of laccase on well-organized mercaptoundecanoic acid separates efficiently the enzyme from the electrode and does not allow easy access of mediators to the surface. Attachment of the enzyme at smaller distance from the electrode by means of significantly shorter spacer molecule—mercaptopropionic acid improved the efficiency of catalytic reduction of oxygen on the monolayer modified electrode.     

Poly(vinyl alcohol)/Clay‐Based Nanocomposite Hydrogels: Swelling Behavior and Characterization

Polymer/clay composite hydrogels were prepared based on PVA hydrogels containing 3–10 wt.‐% MOM. Their microstructure and morphology were studied by FT‐IR, WAXS and SEM, whereas the interactions between MOM and PVA were evaluated by thermal analyses. The swelling ratios for the PVA/MOM hydrogels decrease with increasing MOM content. WAXS results indicate that MOM was intercalates, and DSC results show a strong interaction between PVA and MOM. This interaction results in a stable network, which is confirmed by the elastic modulus and the thermal decomposition behavior of the hydrogels. Therefore, MOM acts as a co‐crosslinker, improving the stability of the network.