Light olefins dimerization to high quality gasoline components

New attractive technologies can be designed in the field of light olefins dimerization (C₃–C₅) in order to obtain products useful as gasoline blending components; the technologies are characterized both by low investment costs and by high product quality. Isobutene dimerization is a powerful alternative to MTBE production whenever the use of the latter will be forbidden in gasoline. Also the dimerization of iso-amylenes and propylene, when properly designed, can give products (both the olefins and the corresponding hydrogenated derivatives) characterized by very high octane numbers. More in general all these technologies can help to debottleneck the FCC downstream when enhanced olefins production is achieved by means of new FCC catalysts and processes.     

Off‐line monitoring of butyl acrylate and vinyl acetate homopolymerization and copolymerization in toluene

A study of butyl acrylate (BA) and vinyl acetate (VAc) solution homopolymerization and copolymerization in toluene was carried out. The conversion and copolymer composition were monitored using traditional techniques (gravimetry and ¹H‐NMR spectroscopy) and attenuated total reflectance‐Fourier transform IR (ATR‐FTIR) spectroscopy with a diamond‐composite probe and light conduit technology. The peak height of the characteristic absorbances of the monomer(s) during the course of the reaction was used to calculate the conversion and copolymer composition for the ATR‐FTIR monitoring. The data obtained using a ReactIR? 1000 reaction analysis system in the off‐line mode showed very good agreement with data obtained using traditional techniques. The solvent effects on BA and VAc solution homopolymerizations and copolymerizations in toluene were also investigated. Improvement to model predictions was obtained by allowing the lumped constant (k_p/k) to vary with the solvent concentration. Experimental data and model predictions of the number‐ and weight‐average molecular weights for the investigated systems are also presented. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2958–2977, 2001     

A Secreted Chorismate Mutase from Xanthomonas arboricola pv. juglandis Attenuates Virulence and Walnut Blight Symptoms

Walnut blight is a significant above-ground disease of walnuts caused by Xanthomonas arboricola pv. juglandis (Xaj). The secreted form of chorismate mutase (CM), a key enzyme of the shikimate pathway regulating plant immunity, is highly conserved between plant-associated beta and gamma proteobacteria including phytopathogens belonging to the Xanthomonadaceae family. To define its role in walnut blight disease, a dysfunctional mutant of chorismate mutase was created in a copper resistant strain Xaj417 (XajCM). Infections of immature walnut Juglans regia (Jr) fruit with XajCM were hypervirulent compared with infections with the wildtype Xaj417 strain. The in vitro growth rate, size and cellular morphology were similar between the wild-type and XajCM mutant strains, however the quantification of bacterial cells by dPCR within walnut hull tissues showed a 27% increase in XajCM seven days post-infection. To define the mechanism of hypervirulence, proteome analysis was conducted to compare walnut hull tissues inoculated with the wild type to those inoculated with the XajCM mutant strain. Proteome analysis revealed 3296 Jr proteins (five decreased and ten increased with FDR ≤ 0.05) and 676 Xaj417 proteins (235 increased in XajCM with FDR ≤ 0.05). Interestingly, the most abundant protein in Xaj was a polygalacturonase, while in Jr it was a polygalacturonase inhibitor. These results suggest that this secreted chorismate mutase may be an important virulence suppressor gene that regulates Xaj417 virulence response, allowing for improved bacterial survival in the plant tissues.     

Polysaccharide‐based membranes loaded with erythromycin for application as wound dressings

In this study, the antibiotic erythromycin (Ery) was incorporated into chitosan (Ch)–alginate (A) and Ch–xanthan (X) membranes with the aim of using them as bioactive wound dressings. Drug incorporation was performed by direct addition (DA) to the polysaccharide mixture and by membrane impregnation in solution (IS). A higher incorporation efficiency was obtained for DA, but higher amounts of drug were loaded into membranes by the IS method (maxima ≈ 2.1 and 0.7 g/g for Ch–X and Ch–A, respectively) because the initial concentration of drug could be higher than that in the DA method. Ery release in phosphate‐buffered saline was slow, reaching about 12 and 32 mg of drug/g of membrane in 60 h for Ch–X and 4 and 16 mg/g for Ch–A by the DA and IS methods, respectively. With formulations prepared with IS, the required therapeutic dosage was reached within 60 h, whereas for those incorporating the drug by DA, prolonged use would be required. Both membrane types behaved as drug reservoirs, providing continuous antibiotic release to the wound site. Formulations with higher drug contents showed effective antibacterial activity against two species of bacteria commonly found in skin lesions, Staphylococcus aureus and Pseudomonas aeruginosa, and were thus potentially capable of protecting the wound site from bacterial attack. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43428.     

Antioxidant Activity of γ-Oryzanol: A Complex Network of Interactions

γ-oryzanol (Orz), a steryl ferulate extracted from rice bran layer, exerts a wide spectrum of biological activities. In addition to its antioxidant activity, Orz is often associated with cholesterol-lowering, anti-inflammatory, anti-cancer and anti-diabetic effects. In recent years, the usefulness of Orz has been studied for the treatment of metabolic diseases, as it acts to ameliorate insulin activity, cholesterol metabolism, and associated chronic inflammation. Previous studies have shown the direct action of Orz when downregulating the expression of genes that encode proteins related to adiposity (CCAAT/enhancer binding proteins (C/EBPs)), inflammatory responses (nuclear factor kappa-B (NF-κB)), and metabolic syndrome (peroxisome proliferator-activated receptors (PPARs)). It is likely that this wide range of beneficial activities results from a complex network of interactions and signals triggered, and/or inhibited by its antioxidant properties. This review focuses on the significance of Orz in metabolic disorders, which feature remarkable oxidative imbalance, such as impaired glucose metabolism, obesity, and inflammation.     

Drying of Herbal Product in Closed System

A new product from a low temperature drying method that reduces the loss of highly volatile essential oils is presented. The proposed drying method consists of evaporation/sublimation of water and aromatic substances in a dryer with a closed drying agent cycle. In parallel, the evaporated compounds are continuously condensed in a heat exchanger. As a result of the drying process, high-quality dried plants and Fluidolat as liquid phase containing water and volatile organic compounds are obtained. The aim of presented investigations was to optimize the developed technology for the herb lavender.     

Nanostructured materials with biomimetic recognition abilities for chemical sensing

Binding features found in biological systems can be implemented into man-made materials to design nanostructured artificial receptor matrices which are suitable, e.g., for chemical sensing applications. A range of different non-covalent interactions can be utilized based on the chemical properties of the respective analyte. One example is the formation of coordinative bonds between a polymerizable ligand (e.g., N-vinyl-2-pyrrolidone) and a metal ion (e.g., Cu(II)). Optimized molecularly imprinted sensor layers lead to selectivity factors of at least 2 compared to other bivalent ions. In the same way, H-bonds can be utilized for such sensing purposes, as shown in the case of Escherichia coli. The respective molecularly imprinted polymer leads to the selectivity factor of more than 5 between the W and B strains, respectively. Furthermore, nanoparticles with optimized Pearson hardness allow for designing sensors to detect organic thiols in air. The ‘harder’ MoS₂ yields only about 40% of the signals towards octane thiol as compared to the ‘softer’ Cu₂S. However, both materials strongly prefer molecules with -SH functionality over others, such as hydrocarbon chains. Finally, selectivity studies with wheat germ agglutinin (WGA) reveal that artificial receptors yield selectivities between WGA and bovine serum albumin that are only about a factor of 2 which is smaller than natural ligands.