聚苯硫醚复合涂层的耐磨性能

研究了用固体润滑石墨、碳化硅、二硫化钼等填料改性的聚苯硫醚 (PPS)涂层的耐磨性能。实验结果表明 ,聚苯硫醚复合涂层具有优良的耐磨性 ;加入适量 ( 3 0 % )的石墨、碳化硅等固体润滑剂 (石墨 :碳化硅 =2∶3 ) ,可以有效提高涂层的耐磨性能 ,而二硫化钼和三氧化二铬的减摩效果更佳     

延迟破胶及强制裂缝闭合技术的研究及应用

采用延迟破胶技术,在压裂施工过程中加入不同浓度的胶囊破胶剂,利用它的延缓释放特性,使植物胶压裂液耐温、耐剪切稳定性增强,并且可以在不造成压裂液的流变性、滤失性和携砂性等过早丧失的前提下高浓度使用胶囊破胶剂。该技术与常规破胶技术相比,延缓释放率达50%,能更有效地清除液体残渣,减少压裂液对储层的伤害。同时由于有延缓破胶的特性,放喷采用相应的措施,可以降低支撑剂沉降速度,形成较好的沉砂剖面,提供高的裂缝导流能力,并且可以降低滤饼和压裂液残渣的伤害。     

松辽盆地南部岩性圈闭识别技术及效果

寻找隐蔽油气藏一直是油气勘探中的难题,我国东部吉林油田的中浅层已进入高成熟勘探阶段,油气勘探已由早期的构造圈闭勘探转变为现今的以隐蔽圈闭勘探为主的阶段。本文针对松辽盆地南部的西部前缘带三维连片工区及伊通地堑岔路河断陷,综合应用构造精细解释、声波曲线重构波阻抗反演、层序地层学、地震相及沉积(微)相分析、模型正演、地震属性分析、频谱分解及三维可视化等技术手段,所提供的多口探井获得工业油气流或有良好的油气显示,取得了较好的解释效果。     

Computer Aided Tolerance assignment

Tolerances are basic to the production of every part. This is because perfect parts cannot be produced with existing processes and machines. The determination of tolerances for the individual parts of a functional assembly is critical, but not trivial. Numerous approaches are suggested in past literature for (analytical) tolerance allocation. With the advent of total automation, more attempts are being made to computerize manual design tasks. Tolerance design, assignment and allocation can also be fully automated if the assembly function can be estimated by the computer.

In the present paper, an attempt is made to computerize tolerance assignment. A simple example of a two piece assembly, viz., a fit, is used to demonstrate the developed methodology. A feature extraction is first performed from both detail and assembly drawings. Then, probable assembly interfaces are determined using a rule based procedure. Consequently, tolerances are assigned to the basic dimensions of each feature and to the assembly interfaces using a tolerance database and user interaction. More complex analysis for tolerance allocation is also under study.     

静态EPS及其在建筑工程中的应用

一级负荷中特别重要的负荷，除由两个电源供电外，尚应增设应急电源。在供电条件比较差的地区，取得第二个电源供给一级负荷有困难时，也需要增设应急备用电源。以往经常用自备柴油发电机组、蓄电池、干电池和镍锦电池应急灯作为应急备用电源。本文通过对目前常用的各种应急电源的分析比较，推荐一种新颖的、静态、无公害、免维护无人值守的、供电质量好、安全可靠的集中供电式EPS装置。     

煤系高岭土制备裂化催化剂的探索性研究

从石嘴山煤系高岭土的分析测实,经过改性处理,实验后得出具有碱改性条件,且制备裂化催化剂后重油转化能力有明显提高,开拓了煤系高岭土在石化领域的应用。     

Applying the critical path method to manufacturing routing

Traditionally the critical path method (CPM) has been used primarily as an a'priori planning and scheduling device. Its applications have typically been limited to one-shot projects, usually with a long period of completion time. This paper proposes taking these ideas to continuous production systems, and to implement the CPM not just at the outset but throughout the process. The algorithm calls for repeatedly calculating the critical path through the production process and routing parts so as to remain off this path. Before the model is presented, some basic ideas are introduced from group technology (GT) and CPM. After the presentation of the model, two potential implementations with the usage of computer are proposed.     

真空冷冻干燥技术在三七加工中的应用

介绍了真空冷冻干燥的基本原理，并据三七的特点，探讨三七真空冷冻干燥的工艺流程及特点，简要分析了三七冷冻干燥的前景。     

半导体衬底片的应力损伤及其行为

本文根据实际测量结果,一叙述了半导体衬底制片质量对外延生长的影响。特别是,讨论了在 GaAs、InP 衬底中,产生于切片、研磨和抛光加工过程中的机械损伤的影响。     

一种铁氧体移相驱动器专用集成电路

介绍了ＳＡ０１８铁氧体移相驱动器专用集成电路的工作原理，电路设计和实验结果。该电路的内部电路设计有双路激励驱动器，放大器，积分器和双路高速比较器等功能单元。将铁氧体移相器的激励驱动器和相位控制器融于一体，大大减少了铁氧体移相器的外围设计。