Impedance cardiography used to assess patterns of cardiovascular response to behavioral stressors

This paper presents two examples of how impedance cardiography may be used to interpret the hemodynamic influences on blood pressures measured during behavioral stress. In Study 1, blood pressure changes which were similar during two tasks were shown to have important differences in their cardiac output and vascular resistance components. During work on a reaction time task having aversive incentives compared with a neutral task, the blood pressure changes were seen to be associated with lowered vascular resistance and raised cardiac activity, a "fight-flight" pattern. In Study 2, blood pressure response differences between two subject groups working on an identical task were found to have blood pressure changes differing in their underlying cardiac and vascular components as measured by impedance. Such uses impedance cardiography have widespread potential application in psychophysiological research with humans.     

A groundwater perspective on the river basin management plan for central Portugal - developing a methodology to assess the potential impact of N fertilizers on groundwater bodies

The Water Framework Directive establishes that the river basin management plans must have a summary of the pressures and impacts of human activities, such as agriculture, on the chemical and quantitative status of groundwater bodies. In order to identify those areas where a potential impact from agricultural activities on groundwater bodies exists, but currently lacking groundwater monitoring data, a methodology was developed that combines the use of gross nitrogen balance values with the results of a specific vulnerability assessment index. A farm management efficiency parameter is added, to identify the factors that contribute to nitrogen use efficiency and to assess the near-future scenarios. This methodology allows the identification of significant pressures that may be responsible for a groundwater body failing good status where there is no representative monitoring network.     

Participatory and decentralized water resources management: challenges and perspectives for the North Paraíba River Basin committee - Brazil

The Brazilian Water Resources Policy (Law 9433/1997) establishes participatory and decentralized management, involving civil society, water users and governmental bodies, with the basin committees as the basis of this process. Fifteen years after its implementation, it is possible to perceive accomplishments, but, at the same time, there are some difficulties in regards to the operation of the basin committees in the country. Considering the North Paraíba River Basin - which is completely included in the State of Paraíba, Northeastern Brazil, and presents great social and economic importance for the state - this article analyzes the process of formation, installation and functioning of its Basin Committee (CBH-PB), focusing on its composition, the reasons for the mobilization and demobilization of its members, the intra-relations between segments, and the inter-relations between the CBH-PB and other entities of the State Water Management System (the Water Executive Agency and the State Water Resources Council). The level of decentralization and the quality of participatory management (as it is being performed at the CBH-PB) are discussed and guidelines are suggested in order to allow greater effectiveness to the committee.     

Post-cracking behaviour of steel fibre reinforced concrete

Recently, RILEM TC 162-TDF has proposed equivalent,f _eq , and residual,f _R , flexural tensile strength parameters to characterize and simulate the post-cracking behaviour of steel fibre reinforced concrete (SFRC) structures. In the current work, more than two hundred flexural tests are carried out according to the RILEM TC 162-TDF recommendations and the corresponding values off _eq andf _R parameters are evaluated. In series of specimens reinforced with fibres of a distinct length/diameter ratio, similar values off _eq andf _R parameters were obtained in these series. Although a strong correlation betweenf _eq andf _R was determined, a larger scatter off _R values was observed thereby revealingf _eq to be more appropriate for design purposes. A numerical strategy involving a cross sectional layered model and an inverse analysis was developed to evaluate the post-cracking stress-strain and the stress-crack opening diagrams for the tested SFRC. This strategy was also used to determine a relation between the post-cracking strain, ɛ ^pcr , and the crack opening displacement,w, (ɛ ^pcr =w/L _p ) which is useful for evaluating the crack opening when numerical strategies based on a stress-strain approach are used. The obtainedL _p values range from half the specimen cross section height to half the distance between the tip of the notch and the top of the cross section.

---

Résumé Récemment, pour caractériser et simuler le comportement post-fissuration en traction du béton renforcé des fibres d'acier, la Commission Technique 162-TDF de la RILEM a proposé des paramètres désignés par résistance équivalente, f_eq, et résistance résiduelle, f_R, à la contrainte en flexion. Dans le travail présent, des valeurs de ces paramètres sont obtenues sur plus de deux cents essais de flexion effectués en accord avec les recommandations du TC 162-TDF de la RILEM. Des valeurs semblables de f_eq et f_R ont été obtenues dans des séries d'éprouvettes renforcées avec des fibres d'un rapport longueur/diamètre distinct. Bien qu'une forte corrélation entre f_eq et f_R ait été déterminée, une plus grande dispersion de valeurs du f_R a été observée, en démontrant que f_eq est plus approprié pour les buts du projet. Pour évaluer les diagrammes contrainte-déformation et contrainte-ouverture après fissuration, une stratégie numérique a été développée, en utilisant un modèle de section et en effectuant une analyse inverse. Cette stratégie a aussi été utilisée pour déterminer une relation entre la contrainte après fissuration, ɛ ^pcr , et l'ouverture de fissure, w, (ɛ ^pcr =w/L _p ) utile pour évaluer l'ouverture de la fissure quand les stratégies numériques sont basées sur une approche contrainte-déformation. Les valeurs de L_p obtenues ont varié entre la demi-hauteur de la section de l'éprouvette et la demi-distance entre l'extrémité de l'entaille et le sommet de la section.

     

StatCom-SMES

This article presents the modeling and control of the integration of a StatCom (static-synchronous compensator) with SMES (superconducting magnetic energy storage system) and its dynamic response to system oscillations caused by a three-phase fault. It has been shown that the StatCom-SMES combination can be very effective in damping power system oscillations. Adding energy storage enhances the performance of a StatCom and possibly reduces the MVA ratings requirements of the StatCom operating alone. This is important for a cost/benefit analysis of installing flexible AC transmission system controllers on utility systems. It should be noted that, in this study, the StatCom provides a real power flow path for SMES, but the SMES controller is independent of the StatCom controller. While the StatCom is ordered to absorb or inject reactive power, the SMES is ordered to absorb/inject real power. It was also observed that the location where the combined compensator is connected is important for improvement of overall system dynamic performance. Although the use of a reactive power controller seems more effective in a load area, this simulation study shows that a StatCom with real power capability can damp the power system oscillations more effectively, thereby stabilizing the system faster-if the StatCom-SMES controller is located near a generation area rather than a load area.     

Proteomics Unveils Post-Mortem Changes in Beef Muscle Proteins and Provides Insight into Variations in Meat Quality Traits of Crossbred Young Steers and Heifers Raised in Feedlot

Proteomics has been widely used to study muscle biology and meat quality traits from different species including beef. Beef proteomics studies allow a better understanding of the biological processes related to meat quality trait determination. This study aimed to decipher by means of two-dimensional electrophoresis (2D-PAGE), mass spectrometry and bioinformatics the changes in post-mortem muscle with a focus on proteins differentially expressed in the Longissimus thoracis (LT) muscle of immunocastrated young heifers and steers. Carcass traits, chemical composition, pH, instrumental color (L*, a*, b*), cooking loss and Warner-Bratzler shear force (WBSF) of meat from F1 Montana-Nellore cattle were also evaluated. Backfat thickness (BFT) and intramuscular fat content (IMF) were 46.8% and 63.6% higher in heifers (p < 0.05), respectively, while evaporation losses (EL) were 10.22% lower compared to steers. No differences (p > 0.05) were observed for tenderness evaluated by WBSF (3, 10, and 17 days post-mortem), pH, and color traits (L*, a* and b*) between the experimental groups. The study revealed several proteins to be differentially expressed proteins in heifers compared steers (p < 0.05). In heifers, proteins involved in nutrient transport (TF, ALB, and MB), energy metabolism (ALDOA, GAPDH, and PKM), and oxidative stress and response to stress (HSPA8 and CA3) were associated with a greater BFT and IMF deposition. The higher expression of these proteins indicated greater oxidative capacity and lower glycolytic activity in the LT muscle of heifers. In steers, there was greater abundance of protein expression related to muscle contraction and proteins of structure (ACTA1, TPM2 and TNNT3), energy metabolism (ENO1, ENO3, PYGM, PGM1 and TPI1) and ATP metabolism (ATP5F1B, PEBP1 and AK1), indicating greater glycogenolysis in LT muscle, suggesting a shift in the glycolytic/oxidative fibers of steers.     

Electrospun Azithromycin-Laden Gelatin Methacryloyl Fibers for Endodontic Infection Control

This study was aimed at engineering photocrosslinkable azithromycin (AZ)-laden gelatin methacryloyl fibers via electrospinning to serve as a localized and biodegradable drug delivery system for endodontic infection control. AZ at three distinct amounts was mixed with solubilized gelatin methacryloyl and the photoinitiator to obtain the following fibers: GelMA+5%AZ, GelMA+10%AZ, and GelMA+15%AZ. Fiber morphology, diameter, AZ incorporation, mechanical properties, degradation profile, and antimicrobial action against Aggregatibacter actinomycetemcomitans and Actinomyces naeslundii were also studied. In vitro compatibility with human-derived dental pulp stem cells and inflammatory response in vivo using a subcutaneous rat model were also determined. A bead-free fibrous microstructure with interconnected pores was observed for all groups. GelMA and GelMA+10%AZ had the highest fiber diameter means. The tensile strength of the GelMA-based fibers was reduced upon AZ addition. A similar pattern was observed for the degradation profile in vitro. GelMA+15%AZ fibers led to the highest bacterial inhibition. The presence of AZ, regardless of the concentration, did not pose significant toxicity. In vivo findings indicated higher blood vessel formation, mild inflammation, and mature and thick well-oriented collagen fibers interweaving with the engineered fibers. Altogether, AZ-laden photocrosslinkable GelMA fibers had adequate mechanical and degradation properties, with 15%AZ displaying significant antimicrobial activity without compromising biocompatibility.     

Aphid BCR4 Structure and Activity Uncover a New Defensin Peptide Superfamily

Aphids (Hemiptera: Aphidoidea) are among the most detrimental insects for agricultural plants, and their management is a great challenge in agronomical research. A new class of proteins, called Bacteriocyte-specific Cysteine-Rich (BCR) peptides, provides an alternative to chemical insecticides for pest control. BCRs were initially identified in the pea aphid Acyrthosiphon pisum. They are small disulfide bond-rich proteins expressed exclusively in aphid bacteriocytes, the insect cells that host intracellular symbiotic bacteria. Here, we show that one of the A. pisum BCRs, BCR4, displays prominent insecticidal activity against the pea aphid, impairing insect survival and nymphal growth, providing evidence for its potential use as a new biopesticide. Our comparative genomics and phylogenetic analyses indicate that BCRs are restricted to the aphid lineage. The 3D structure of BCR4 reveals that this peptide belongs to an as-yet-unknown structural class of peptides and defines a new superfamily of defensins.     

Roles of Calcium Signaling in Gene Expression and Photosynthetic Acclimatization of Solanum lycopersicum Micro-Tom (MT) after Mechanical Damage

A momentary increase in cytoplasmic Ca²⁺ generates an oscillation responsible for the activation of proteins, such as calmodulin and kinases, which interact with reactive oxygen species (ROS) for the transmission of a stress signal. This study investigated the influence of variations in calcium concentrations on plant defense signaling and photosynthetic acclimatization after mechanical damage. Solanum lycopersicum Micro-Tom was grown with 0, 2 and 4 mM Ca²⁺, with and without mechanical damage. The expression of stress genes was evaluated, along with levels of antioxidant enzymes, hydrogen peroxide, lipid peroxidation, histochemistry, photosynthesis and dry mass of organs. The ROS production generated by mechanical damage was further enhanced by calcium-free conditions due to the inactivation of the oxygen evolution complex, contributing to an increase in reactive species. The results indicated that ROS affected mechanical damage signaling because calcium-free plants exhibited high levels of H₂O₂ and enhanced expression of kinase and RBOH1 genes, necessary conditions for an efficient response to stress. We conclude that the plants without calcium supply recognized mechanical damage but did not survive. The highest expression of the RBOH1 gene and the accumulation of H₂O₂ in these plants signaled cell death. Plants grown in the presence of calcium showed higher expression of SlCaM2 and control of H₂O₂ concentration, thus overcoming the stress caused by mechanical damage, with photosynthetic acclimatization and without damage to dry mass production.