Widely tunable bottom-emitting vertical-cavity SOAs

We present bottom-emitting tunable vertical-cavity semiconductor optical amplifiers (VCSOAs) with an effective wavelength tuning range of >20 nm. These devices utilize a high reflectivity micromechanically tunable Bragg mirror as the back reflector. Compared with our first generation tunable VCSOAs, the bottom-emitting devices exhibit a two-fold increase in the effective tuning range as well as a five-fold reduction in the required tuning voltage.     

Dyadic-based factorizations for regular paraunitary filterbanks and M-band orthogonal wavelets with structural vanishing moments

Paraunitary filterbanks (PUFBs) can be designed and implemented using either degree-one or order-one dyadic-based factorization. This work discusses how regularity of a desired degree is structurally imposed on such factorizations for any number of channels M /spl ges/ 2, without necessarily constraining the phase responses. The regular linear-phase PUFBs become a special case under the proposed framework. We show that the regularity conditions are conveniently expressed in terms of recently reported M-channel lifting structures, which allow for fast, reversible, and possibly multiplierless implementations in addition to improved design efficiency, as suggested by numerical experience. M-band orthonormal wavelets with structural vanishing moments are obtained by iterating the resulting regular PUFBs on the lowpass channel. Design examples are presented and evaluated using a transform-based image coder, and they are found to outperform previously reported designs.     

Investigation of Arrhenius acceleration factor for integrated circuit early life failure region with several failure mechanisms

Use of the Arrhenius equation for analysis of burn-in and life test data has been called into question in recent years. Validity of the Arrhenius activation energy is asserted to be restricted to only one failure mechanism. Therefore, if multiple failure mechanisms apply to an integrated circuit type, the temperature acceleration factor must be complex. In this study a model is constructed using the Weibull distribution for the failure rate applicable when there are multiple failure mechanisms. In this model a different Arrhenius activation energy corresponds to each failure mechanism. It is shown that under conditions expected to be valid for most integrated circuits, an empirical effective Arrhenius activation energy can be computed that is valid for life test data taken under typical conditions to better than 10%. This provides some justification for the continued usage of a simple Arrhenius equation as an empirical model to analyze life test data.     

Novel T-rail electrodes for substrate removed low-voltage high-speed GaAs/AlGaAs electrooptic modulators

A novel traveling-wave electrode utilizing capacitively loaded T-rail elements was developed for low-voltage high-speed substrate-removed GaAs/AlGaAs electrooptic modulators. Electrodes with varying dimensions were fabricated and characterized. Electrode phase velocity, characteristic impedance, loss coefficient, and capacitive loading were extracted from the measured s-parameters up to 40 GHz. Electrode was also simulated using a finite-element solver. The measured and calculated electrode capacitance values were found to be in excellent agreement, showing that the electrode can be precisely designed. Approaches were outlined to provide a group velocity-matched very high-speed modulator electrode suitable for a low drive-voltage substrate-removed GaAs/AlGaAs electro-optic modulator     

VLSI Implementation of Forward Error Control Technique for ATM Networks

In asynchronous transfer mode (ATM) networks, fixed length cells of 53 bytes are transmitted. A cell may be discarded during transmission due to buffer overflow or a detection of errors. Cell discarding seriously degrades transmission quality. The quality degradation can be reduced by employing efficient forward error control (FEC) to recover discarded cells. In this paper, we present the design and implementation of decoding equipment for FEC in ATM networks based on a single parity check (SPC) product code using very‐large‐scale integration (VLSI) technology. FEC allows the destination to reconstruct missing data cells by using redundant parity cells that the source adds to each block of data cells. The functionality of the design has been tested using the Model Sim 5.7cXE Simulation Package. The design has been implemented for a 5 ° 5 matrix of data cells in a Virtex‐E XCV 3200E FG1156 device. The simulation and synthesis results show that the decoding function can be completed in 81 clock cycles with an optimum clock of 56.8 MHz. A test bench was written to study the performance of the decoder, and the results are presented.     

Revamping of the process condensate treatment unit. G-43-107M/1 unit at LiNOS Ltd

Increasing attention at oil refineries is being focused on solving environmental problems caused by stiffening of the requirements for emissions of harmful substances into air and water. Advanced technologies that reduce the effect of industrial enterprises on the environment to the minimum are becoming increasingly in demand. Treatment of process wastewaters to remove hydrogen sulfide and ammonia is one such problem of the modern refinery with cat crackers. __________ Translated from Khimiya i Tekhnologiya Topliv i Masel, No. 3, pp. 52–55, May–June, 2006.     

An artificial neural network approach on parametric optimization of laser micro-machining of die-steel

In the present research, laser micro machining (LMM) of tungsten-molybdenum general purpose high speed steel (Rex M2) has been studied. Selection of optimum machining parameter combinations for obtaining higher depth of groove and smaller height of recast layer is a challenging task in LMM due to the presence of a large number of process variables. There is no perfect combination of parameters which can simultaneously result in both the highest depth of groove and lowest height of recast layer. This paper presents an attempt to develop a strategy for predicting the optimum machining parameter setting for the generation of the maximum depth of groove with minimum height of recast layer. A feed forward back-propagation neural network has been developed to model the machining process. The model, after proper training, is capable of predicting the response parameters as a function of four different control parameters. Experimental results demonstrate that the machining model is suitable and the optimization strategy satisfies practical requirements. The developed model has been found to be quite unique, powerful and flexible.     

Prony-Based Optimal Bayes Fault Classification of Overcurrent Protection

The development of deregulation and demand for high-quality electrical energy has lead to a new requirement in different fields of power systems. In the protection field, this means that high sensitivity and fast operation during the fault are required while maltripping of relay protection is not acceptable. One case that may lead to a maltrip of the high-sensitive overcurrent relay is the starting current of the induction motor or inrush current of the transformer. This transient current has the potential to affect the correct operation of protection relays close to the component being switched. In the case of switching events, such transients must not lead to overcurrent relay operation; therefore, a reliable and secure relay response becomes a critical matter. Meanwhile, proper techniques must be used to prevent maltripping of such relays, due to transient currents in the network. In this paper, the optimal Bayes classifier is utilized to develop a method for discriminating the fault from nonfault events. The proposed method has been designed based on extracting the modal parameters of the current waveform using the Prony method. By feeding the fundamental frequency damping and ratio of the 2nd harmonic amplitude over the fundamental harmonic amplitude to the classifier, the fault case is discriminated from the switching case. The suitable performance of this algorithm is demonstrated by simulation of different faults and switching conditions on a power system using PSCAD/EMTDC software.     

Influence of inhibitor addition on the corrosion protection performance of sol–gel coatings on AA2024

Sol–gel films are actively investigated during the last decade as possible candidates for environmentally friendly pre-treatments. However, the important drawback in this case is the lack of active corrosion protection and self-healing ability.     

Physico-chemical properties of ceramic pigments for high-temperature application

Heat resistant coatings are required primarily for stacks, exhaust pipes, reactors, space crafts and similar equipments that are permanently or occasionally exposed to elevated temperatures. High-temperature coatings are generally based on silicone resin with ceramic and metallic pigments. In this study, iron oxide, cobalt oxide (thermo chromic compound) and aluminum oxide are used for the preparation of four new types of coloured pigments. The thermal resistant characteristics of these ceramic pigments were studied by differential thermal analysis, thermo gravimetric analysis and differential scanning calorimetric analysis. These ceramic pigments are found to be thermally stable up to 400 °C.