Mineralogy of ash of some American coals: variations with temperature and source

Ten samples of mineral-matter residue were obtained by the radio-frequency low-temperature ashing of subbituminous and bituminous coals. The low-temperature ash samples were then heated progressively from 400 °C to 1400 °C at 100 °C intervals. Mineral phases present at each temperature interval were determined by X-ray diffraction analyses. The minerals originally present in the coals (quartz, kaolinite, illite, pyrite, calcite, gypsum, dolomite, and sphalerite) were all altered to higher temperature phases. Several of these phases, including kaolinite, metakaolinite, mullite, anhydrite, and anorthite, were found only in limited temperature ranges. Therefore the temperature of formation of the ashes in which they occur may be determined. Mineralogical differences were observed between coal samples from the Rocky Mountain Province, the Illinois Basin, and the Appalachians; and as a result of these mineralogical differences, different high-temperature phases resulted as the samples were heated. However, regional generalizations cannot be made until a greater number of samples have been studied.     

Trends in industrial use of vegetable oils in coatings

Alkyd resins continue to be a major factor in coatings. Increased oil consumption in alkyd manufacture is not expected to be significant. Projections indicate a modest growth in total coatings usage at 2–3% per year. The industry is facing diverse coating performance demands that will bring unusual, more costly ingredients into use, probably at the expense of traditional oil-based alkyd resins. Offsetting this oil usage decline, perhaps, will be the continuing cost advantage of the relatively low-priced vegetable oils and the general versatility of alkyd resins. Increased use of oil-based resins is expected in emulsion (latex) paint modifiers to improve adhesion and early water resistance. The coatings industry, at least in maintenance and industrial coatings, is adopting a cost/sq ft/year economic evaluation, facotoring in the useful life of the coating.     

Activated gas plasma surface treatment of polymers for adhesive bonding

Polyethylene, polypropylene, poly(vinyl fluoride) (Tedlar), polystyrene, nylon 6, poly(ethylene terephthalate) (Mylar), polycarbonate, cellulose acetate butyrate, and a poly(oxymethylene) copolymer were treated with activated helium and with activated oxygen. Mechanical strengths of adhesive-bonded specimens prepared from treated and from untreated coupons were compared. Polyethylene (PE) and polypropylene (PP) showed the greatest increases in bond strength. Oxygen and helium were both effective with polyethylene, but polypropylene showed no improvement when treated with activated helium. The results with excited helium parallel the effects of ionizing radiation on these two polymers, as does the appearance of unsaturation bands in the infrared (965 cm^?1 in PE, and 887 and 910 cm^?1 in PP). Active nitrogen produced excellent bond strength with polyethylene but not with polypropylene. Of the remaining polymers examined, Tedlar, polystyrene, and nylon 6 showed the greatest improvement in bondability after treatment, and Mylar showed moderate improvement. Polycarbonate, cellulose acetate butyrate, and the poly(oxymethylene) copolymer gave approximately two-fold increases in lap-shear bond strength. In several cases, significant differences in response to time of treatment and type of excited gas were found.     

Coupled oscillations of H2/O2/CO on silica supported rhodium catalyst

Self-sustained oscillations obtained during the catalytic oxidation of CO and H₂ were studied over Rh/SiO₂ by an FTIR-mass spectrometric technique. An average oscillatory period of 7.1±0.5 minutes was obtained for the CO/O₂ reaction at 348 K. For the H₂/O₂ oscillatory reaction the period was observed to be 1.3±0.8 minutes. When the oscillations were coupled at the same temperature, the period for both the CO/O₂ and the H₂/O₂ reactions was observed to be 7.9±0.8 minutes. The kinetic coupling of the reaction rates is explained by considering the periodic fluctuations in surface temperature which occur as a result of the more exothermic CO/O₂ reaction.     

Object-Oriented Systems Development

Object-oriented design is an approach to systems development that proposes the use of system objects to build new systems and rebuild old ones. An important goal of object-oriented development is to change the nature of traditional software development from designing and writing models from scratch to building systems through the assembly of reusable software objects. This article discusses the productivity potential as well as the limitations of object-oriented systems development and makes recommendations for its use.     

确保管道运输的泄漏检测技术

保证所有管道中石油从一端流向另一端不泄漏要比它的探测更加困难。比较图中的3个系统,可以看到这项技术在40多年来是如何逐步发展的。     

Mutual information for Lucas-Kanade Tracking (MILK): an inverse compositional formulation

Mutual Information (MI) is popular for registration via function optimisation. This work proposes an inverse compositional formulation of MI for Levenberg-Marquardt optimisation. This yields a constant Hessian, which may be pre-computed. Speed improvements of 15% were obtained, with convergence accuracies similar to those of the standard formulation.     

Attraction ofCarpophilus spp. (Coleoptera: Nitidulidae) to synthetic aggregation pheromones and host-related coattractants in Australian stone fruit orchards: Beetle phenology and pheromone dose studies

Synthetic aggregation pheromones ofCarpophilus hemipterus (L.) andCarpophilus mutilatus Erichson were field tested during a 10-month period in southern New South Wales stone fruit orchards to determineCarpophilus spp. phenology and the effect of two pheromone doses on attraction. Aggregation pheromones synergize the attraction of host volatiles toCarpophilus spp. Four major species,C. hemipterus, C. mutilatus, C. davidsoni Dobson andC. (Urophorus) humeralis (F.), were trapped, with greater numbers of each species inC. hemipterus pheromone/fermenting whole-wheat breaddough-baited traps, than in dough-only-traps. InC. mutilatus pheromone/ fermenting-dough-baited traps, onlyC. mutilatus andC. davidsoni responded in greater numbers than to dough-only traps. Beetles first appeared in traps in late September (early spring) when daily maximum temperatures averaged 17.5C. Trappings reached a peak during October and declined to very low levels in November–December (late spring-early summer). Numbers trapped of all species increased during February–March (late summer–early autumn), presumably due to the presence of abundant host resources (ripening and fallen fruit), and continued at high levels until May (late autumn). An 18-week study demonstrated significantly greater responses byCarpophilus spp. to 5000-g than to 500-g doses of C.hemipterus andC. mutilatus pheromones. Greatest responses to 5000g were recorded forC. hemipterus andC. mutilatus responding to their own pheromones (increased attraction over dough alone of 259x and 21.2x respectively). Implications of the study and the potential for using synthetic aggregation pheromones for managingCarpophilus spp. populations in Australian stone fruit are discussed.     

Magnetism and spin liquid behavior in a two layer Hubbard model

In this paper we report the results of Quantum Monte Carlo (QMC) simulations of a tight binding, correlated electron model consisting of two 2D Hubbard sheets hybridized by an intersheet hopping t. As t increases, a ground state with long range antiferromagnetic order gives way to a spin liquid phase.