WO3/BiVO4 composite photoelectrode prepared by improved auto-combustion method for highly efficient water splitting

We report on the improvement in the water splitting efficiency of a WO₃/BiVO₄ composite photoelectrode by the application of an improved auto-combustion method to the preparation of porous BiVO₄ thin films. The unique feature of this preparation method is the addition of both NH₄NO₃, as a strong oxidizing agent, and an organic additive into BiVO₄ precursor solution. The local decomposition heat of the organic additive and oxidizing agent created a porous film with small, highly crystalline BiVO₄ particles. The photoelectrode has many advantages over existing ones, such as the high light-harvesting efficiency (LHE), a single BiVO₄ phase, the facile access of the holes to the photoelectrode/electrolyte interface, and the ease of water and oxygen diffusion. The maximum incident photon-to-current efficiency (IPCE) was estimated to be 64% (at 440 nm, 1.23 V vs. RHE) and the applied bias photon-tocurrent efficiency (ABPE) reached as high as 1.28%. This ABPE value is highest among all oxide semiconductor photoelectrodes reported previously, except for the case of a stacking photoelectrode system.     

Detection of genetically modified organisms in foreign-made processed foods containing corn and potato

Investigations of the validity of labeling regarding genetically modified (GM) products were conducted using polymerase chain reaction (PCR) methods for foreign-made processed foods made from corn and potato purchased in the Tokyo area and in the USA. Several kinds of GM crops were detected in 12 of 32 samples of processed corn samples. More than two GM events for which safety reviews have been completed in Japan were simultaneously detected in 10 samples. GM events MON810 and Bt11 were most frequently detected in the samples by qualitative PCR methods. MON810 was detected in 11 of the 12 samples, and Bt11 was detected in 6 of the 12 samples. In addition, Roundup Ready soy was detected in one of the 12 samples. On the other hand, CBH351, for which the safety assessment was withdrawn in Japan, was not detected in any of the 12 samples. A trial quantitative analysis was performed on six of the GM maize qualitatively positive samples. The estimated amounts of GM maize in these samples ranged from 0.2 to 2.8%, except for one sample, which contained 24.1%. For this sample, the total amount found by event-specific quantitative analysis was 23.8%. Additionally, Roundup Ready soy was detected in one sample of 21 potato-processed foods, although GM potatoes were not detected in any sample.     

Study on the determination of pesticide residues in crops by ion-trap GC/MS/MS

Ion-trap GC/MS/MS was evaluated for the multi-residue determination of pesticides in agricultural products. Matrices were extracted from samples (spinach, carrot, onion and brown rice) with acetone and submitted to gel permeation chromatography, followed by a clean-up step through a graphite carbon cartridge. Thirty-five pesticides were added to either matrix, and analyzed by GC/MS/MS. Detection limits of pesticides by GC/MS/MS was almost the same as those by GC/MS (SIM). Coefficients of variation of peak area in 5 measurements of each pesticide at 0.1 microgram/mL or 0.05 microgram/mL with or without matrices were mostly acceptable, though those of 20 pesticides out of 35 were higher than 10% at a concentration of 0.02 microgram/mL. It was indicated that matrix artifacts, which interfere with GC/MS-Scan analysis, could be eliminated in some cases by using GC/MS/MS.     

The nuclear actin-related protein Act3p/Arp4p is involved in the dynamics of chromatin-modulating complexes

Chromatin remodelling and histone-modifying complexes govern the modulation of chromatin structure. While components of these complexes are diverse, nuclear actin-related proteins (Arps) have been repeatedly found in these complexes from yeast to mammals. In most cases, Arps are required for functioning of the complexes, but the molecular mechanisms of nuclear Arps have as yet been largely unknown. The Arps and actin, sharing a common ancestor, are supposed to be highly similar in the three-dimensional structure of their core regions, including the ATP-binding pocket. The Arp Act3p/Arp4p of Saccharomyces cerevisiae exists within the nucleus, partly as a component of several high molecular mass complexes, including the NuA4 histone acetyltransferase (HAT) complex, and partly as uncomplexed molecules. We observed that mutations in the putative ATP-binding pocket of Act3p/Arp4p increased its concentration in the high molecular mass complexes and, conversely, that an excess of ATP or ATPgammaS led to the release of wild-type Act3p/Arp4p from the complexes. These results suggest a requirement of ATP binding by Act3p/Arp4p for its dissociation from the complexes. In accordance, a mutation in the putative ATP binding site of Act3p/Arp4p inhibited the conversion of the NuA4 complex into the smaller piccoloNuA4, which does not contain Act3p/Arp4p and exhibits HAT activity distinct from that of NuA4. Although the in vitro binding activity of ATP by recombinant Act3p/Arp4p was found to be rather weak, our observations, taken together, suggest that the ATP-binding pocket of Act3p/Arp4p is involved in the function of chromatin modulating complexes by regulating their dynamics.     

Evaluation of selective plating media for the detection of heat- or freeze-injured Staphylococcus aureus

The efficacy of Baird-Parker (BP) agar, mannitol-salt-egg yolk (MSEY) agar and mannitol salt (MS) agar in detecting Staphylococcus aureus FRI-100 heated at 52 degrees C for 20 min in 100 mmol/L potassium phosphate buffer was determined. Brain heart infusion agar with 1% pyruvate (BHIP agar) supported the highest recovery of injured cells and was used as the control medium. Of the three selective media, significantly higher recovery of heat-injured cells was observed on BP agar than MSEY agar, and the poorest recovery was observed on MS agar (p < 0.05). Low recovery of unheated cells was obtained for MS compared with other media (p < 0.05). A reduction in populations occurred gradually in reagent-grade water stored for 14 days at -20 degrees C. There was no significant difference between BHIP agar and MS agar in the number of freeze-injured cells recovered from 1 to 14 days.     

Plasmagestützte Beschichtung von Bauteilen bei niedrigen Temperaturen

The deposition of wear resistant coatings is possible nowadays at low temperature by the Plasma Assisted CVD process using metall organic precursors. Thus a coating of temperature sensitive materials like aluminium, magnesium and polymer at low temperature is realised. The wear resistant coatings TiCN and ZrCN were deposited on light metals at a temperature below 160°C. The mechanical properties of the layers show the potential of the coatings for parts with wear and friction. The surface hardness, the abrasive wear and the friction value are improved compared to the properties of substrate material and steel. Transparent BCN‐coatings can be used as scratch resistant coatings on polymers like polycarbonate. The layers offers good transmission by high hardness.     

Electrical and Thermal Conductivity and Conduction Mechanism of Ge<Subscript>2</Subscript>Sb<Subscript>2</Subscript>Te<Subscript>5</Subscript> Alloy

Ge₂Sb₂Te₅ alloy has drawn much attention due to its application in phase-change random-access memory and potential as a thermoelectric material. Electrical and thermal conductivity are important material properties in both applications. The aim of this work is to investigate the temperature dependence of the electrical and thermal conductivity of Ge₂Sb₂Te₅ alloy and discuss the thermal conduction mechanism. The electrical resistivity and thermal conductivity of Ge₂Sb₂Te₅ alloy were measured from room temperature to 823 K by four-terminal and hot-strip method, respectively. With increasing temperature, the electrical resistivity increased while the thermal conductivity first decreased up to about 600 K then increased. The electronic component of the thermal conductivity was calculated from the Wiedemann–Franz law using the resistivity results. At room temperature, Ge₂Sb₂Te₅ alloy has large electronic thermal conductivity and low lattice thermal conductivity. Bipolar diffusion contributes more to the thermal conductivity with increasing temperature. The special crystallographic structure of Ge₂Sb₂Te₅ alloy accounts for the thermal conduction mechanism.     

The structure of the core polyol of the ether lipids fromSulfolobus acidocaldarius

The major ether-type lipid structures ofSulfolobus acidocaldarius (ATCC33909) were composed of caldarchaeol and calditoglycerocaldarchaeol. However, the characterization by nuclear magnetic resonance spectroscopy and mass spectrometry showed that the structure of calditol in calditoglycerocaldarchaeol is not nonitol, 2-(1′,2′,3′-trihydroxypropyl)1,2,3,4,5,6-hexahydroxyhexane, but 2-hydroxymethyl-1-(2,3-dihydroxypropoxy),2,3,4,5-cyclopentanetetraol with an ether linkage in the molecule. Such an intermolecular ether linkage was resistant, to BCl₃ treatment, but nonresistant to 57% HI degradation treatment conducted at 100°C for 60 h, producting 2-hydroxymethyl-1,2,3,4,5-cyclopentanepentaol from calditol as reaction product. Further, it was confirmed that the structure of calditol is essentially a derivative of glycerol, and hydrocarbon chains were conjugated to the glycerol-like site in the structure. The calditol with an ether linkage in the molecule suggested an important role regarding the properties of heat-resistance and acid-resistance observed inSulfolobales. Presented at the international workshop on “Molecular Biology and Biotechnology of Extremophiles and Archaebacteria,” Wako, Japan, August 1993.     

Improvement in Oxidation Resistance of Stainless Steel by Molten-Salt Electrodeposition of La

Improvement in the oxidation resistance of SUS304 stainless steel was accomplished by electrodeposition of La in a molten salt. The electrolysis of La was conducted using a potentiostatic-polarization method in an equimolar NaCl–KCl melt containing 3.5 mol. LaF ₃ at 1023 K. Observation of the specimen surface after polarization at –1.8 V (vs. Ag/Ag⁺ (0.1)) for 0.18 ks showed that La particles were uniformly dispersed on the surface. The oxidation resistance of the electrodeposited stainless steel was significantly improved as compared with the untreated stainless steel. The scale formed on the untreated stainless steel after oxidation was thick and consisted of Fe₂O₃ and Fe₃O₄, whereas the scale formed on the elecrodeposited stainless steel was extremely thin, and mainly consisted of Cr₂O₃.