Analysis of the gate current as a suitable indicator for FET degradation under nonlinear dynamic regime

Electron device degradation, although not directly accounted for, represents a key issue in microwave circuit design. This is especially true when the particular applications involved (e.g., satellite, military, consumer) do not allow or strongly discourage any kind of maintenance. As a matter of fact, in order to account for device degradation in circuit design, a suitable electron device model is needed which is able to predict the performance degradation as a function of the actual electrical regime involved in the device operation. Such a kind of model is not available in literature. In this paper, quantitative results are provided for device degradation indicators which correlate DC and RF stress experiments. These results can be considered an important step toward the definition of a nonlinear model accounting for device degradation.     

Impact of Ge-Sb-Te compound engineering on the set operation performance in phase-change memories

The phase-change memory (PCM) technology is considered as one of the most attractive non-volatile memory concepts for next generation data storage. It relies on the ability of a chalcogenide material belonging to the Ge-Sb-Te compound system to reversibly change its phase between two stable states, namely the poly-crystalline low-resistive state and the amorphous high-resistive state, allowing the storage of the logical bit. A careful study of the phase-change material properties in terms of the set operation performance, the program window and the electrical switching parameters as a function of composition is very attractive in order to enlarge the possible PCM application spectrum. Concerning the set performance, a crystallization kinetics based interpretation of the observed behavior measured on different Ge-Sb-Te compounds is provided, allowing a physics-based comprehension of the reset-to-set transition.     

Three-dimensional optical data storage through multi-photon confocal microscopy and imaging

Three dimensional optical data storage is one of the most promising tools to respond to the always growing demand for high data storage capacity. Here, we focused a femtosecond laser source by means of a confocal microscope onto different transparent recording media. The purpose of the study is to probe the capability of the system to independently address different data layers within the storage medium achieving thus three dimensional data storage. We demonstrated the possibility to write superposed independent layers of data due to either multiphoton excitation or to local optical breakdown and the performances observed in the different types of media used are compared.     

The <Emphasis Type=Italic>j</Emphasis>-index: a new bibliometric index and multivariate comparisons between other common indices

A new bibliometric index is proposed, trying to preserve the advantages of the h-index and to overcome its disadvantages. Multivariate comparisons among 18 bibliometric indices are performed by using Hasse Diagram Technique (HDT) and Principal Component Analysis (PCA). The comparisons were performed on some artificial data sets, three of them well known in literature. The obtained results seems to highlight some interesting properties of the new index and also reveals some relevant relationships among the considered bibliometric indices.     

Distributed damage creates flaw tolerance

A qualitative micromechanical fracture mechanics model is presented that shows how a structure that is sensitive to the presence of a single crack or hole can be rendered flaw tolerant by the presence of an interacting distribution of such flaws. The simple model was inspired by the ductile fracture experienced by the under-designed gusset plates recovered from the I-35W Bridge collapse and by the experimentally measured increase in toughness of concrete damaged by fire.     

Comparison of four test methods to measure damping properties of materials by using piezoelectric transducers

This article presents the experimental results of damping loss factor and Young’s modulus obtained for stiff and flexible materials through the use of four different methodologies: the Central Impedance Method, the Modified Oberst Method, the Seismic Response Method, and the simply supported beam method. The first three methods are based on the ASTM standard but using different experimental setting and different Frequency Response Functions. The fourth method corresponds to a non-resonant technique used in the characterization of materials at very low frequencies. In this work, the results of damping loss factor and Young’s modulus obtained through these four methods are compared, the variability of results is studied and the sensitivity of each technique when facing controlled temperature variations is verified.     

Three-dimensional effects induced by FRP-from-masonry delamination

In this study, delamination of a perfectly-adherent FRP reinforcement from a masonry pillar is investigated by means of a fully three-dimensional finite element model. It is shown that the width of the FRP reinforcement governs the propagation of damage through the brick bulk starting from the anchorage of the strip, and influences significantly the overall response in terms of peak strength, ductility and fracture energy. The resulting failure mechanisms are specified. A critical comparison with formulae provided by Italian design code is also provided, for which mechanically-based improvements are suggested, taking into account three-dimensional effects.     

Using finite element modeling to examine the flow processes in quasi-constrained high-pressure torsion

Finite element modeling was used to examine the flow processes in high-pressure torsion (HPT) when using quasi-constrained conditions where disks are contained within depressions on the inner surfaces of the upper and lower anvils. Separate simulations were performed using applied pressures from 0.5 to 2.0 GPa, rotations up to 1.5 turns and friction coefficients from 0 to 1.0 outside of the depressions. The simulations demonstrate the distribution of effective strain within the depressions is comparable to the prediction by ideal torsion, and the applied pressure and the friction coefficient outside the depressions play only a minor role in the distribution of effective strain. The mean stresses during processing vary linearly with the distance from the center of the disk such that there are higher compressive stresses in the disk centers and lower stresses at the edges. The torque required for rotation of the anvil is strongly dependent upon the friction coefficient between the sample and the anvil outside the depressions.