Study of nanofiber scaffolds of PAA,PAA/CS,and PAA/ALG for its potential use in biotechnological applications

In recent times, electrospun nanofibers have been widely studied from several biotechnological approaches; in this work, poly(acrylic acid) (PAA) solutions mixed with chitosan and alginate were electrospun and characterized to determine the behavior of these fibers when used in combination with bacteria, different samples were incubated with the bacterial strains: Streptomyces spp., Micromonospora spp., and Escherichia coli and a OD600 test was performed. The formation of nanofibers via electrospinning and the physicochemical properties of the obtained fibers were evaluated. Results showed that the presence of chitosan enhanced the thermal stability of PAA, since PAA/alginate fibers lost 5% of their mass at 41°C, whereas PAA/chitosan lost this amount at around 125°C. The fibers demonstrated suitable characteristics to be used as a bacteria bioreactor.     

Actuator fault estimation based on generalized learning observer for quasi-linear parameter varying systems

This article presents a generalized learning observer (GLO) design for the simultaneous estimation of states and actuator faults for polytopic quasi-linear parameter varying systems. The proposed approach is based on the use of a GLO, which generalized the existing results on the proportional-integral observers. Conditions of existence and stability of the observer are given through the stability analysis in the sense of Lyapunov. Its design is obtained in terms of a set of linear matrix inequalities. The performance of the proposed method is evaluated by simulation in a one-link-flexible joint robot system.     

Beyond network simulators: Fostering novel distributed applications and protocols through extendible design

Simulation has been of paramount importance to the development of novel Internet protocols. Such an approach typically focuses on one of three domains: wireless and other link-layer technologies, routing protocols, and transport-layer mechanisms and protocols. Existing techniques can tackle well simulation at layers 2, 3 and 4 of the TCP/IP architecture, but are not flexible enough to appropriately deal with application-layer protocols. These require simulators that support the modeling of networks and components with different levels of abstraction. Simmcast is an object-oriented framework that focuses on the necessary flexibility for application-layer protocol research. A simulation can be developed by the simple extension of building blocks that closely resemble components of a real network such as hosts, links and routers. The internal complexity of these components, however, is hidden from the user, so he/she can focus on the implementation of the desired protocol characteristics. This paper describes the flexible simulation architecture proposed and instantiated through Simmcast, and draws lessons from our experience in designing, implementing and deploying it. We also present framework instances used to evaluate application-layer protocols, exemplifying how different kinds of simulations can be developed with Simmcast.     

A socially inspired energy feedback technology: challenges in a developing scenario

Raising awareness of the environmental impact of energy generation and consumption has been a recent concern of contemporary society worldwide. Underlying the awareness of energy consumption is an intricate network of perception and social interaction that can be mediated by technology. In this paper we argue that issues regarding energy, environment and technology are very much situated and involve tensions of sociocultural nature. This exploratory investigation addresses the subject by introducing the design of a Socially-inspired Energy Eco-Feedback Technology (SEET), which is composed of an interactive system to trigger and mediate collective savings and a tangible device as a public feedback. Results of an evaluation situated in the context of a school in a socially disadvantaged area in Brazil are discussed, shedding light on the sociocultural aspects related to the subject. The role of the SEET to motivate energy awareness collectively among the social group is assessed, as well as the design characteristics that contributed to that. Outcomes bring to light social aspects and dynamics that would hardly have been predicted, evidencing critical factors related to a socially inspired design approach in the energy awareness domain.     

Application of titanium machining chips in welding consumables for wear-resistant hardfacing

Equipment of sugar cane plants and mineral extraction are submitted to severe abrasive wear conditions. Welded hardfacings are usually applied to repair this kind of damage, where commercial chromium/carbon-rich welding consumables have usually been employed. In the present work we investigated the microstructure of experimental hardfacings made by addition of residues (chips) collected from the machining of ASTM F67 (unalloyed Ti, grade 4) alloy. Mixtures with different carbide-formers (Cr/Nb ferro-alloys) were also tested. Two layers of ‘pure’ chips (Ti), chips plus Fe–Cr (Ti–Cr), and chips plus Fe–Nb (Ti–Nb) were applied on low-carbon steel specimens by the GTAW/TIG process. The microstructure of hardfacing layers was observed by optical and scanning electron microscopy (SEM) equipped with EDS microanalysis. The microstructural characterization has determined that carbide distributions change significantly with the chemical nature of the hardfacing. SEM observations coupled with EDS microanalysis have confirmed the formation of complex carbides within the metal weld, whose stoichiometry was determined by X-ray diffraction (XRD) analysis. Mixed carbides of MC type and some cementite have been found. As a result it was suggested that use of ASTM F67 chips as carbide formers for composition of welding consumables can contribute to improved wear resistance of hardfacings, if compared with traditional chromium-based hardfacings.     

Student perceptions of model-based estimating

The use of building information modeling (BIM) is well established in architecture, engineering and construction. However, previous studies note a lack of BIM expertise in academia, leading to slow adoption and limited knowledge on which to base BIM-related content. To improve course development, it is important to understand students’ perceptions of BIM-related subject matter. This study exposed estimating students (n = 214) to a model-based quantity takeoff (QTO) tutorial using Revit. Students’ perceptions of a Revit-based BIM’s usefulness for easily providing reliable and accurate material quantities were measured using a pre-test, tutorial and post-test design. Results revealed significant differences in students’ mean levels of agreement that an accurate QTO is completed for an estimator with the click of a button when a design team generated BIM model is available. Results also revealed significant differences in students’ level of agreement that a Revit-based BIM makes performing QTO by hand obsolete. This study provides educators’ insight into students’ perceptions of BIM use in QTO. Understanding student perceptions is paramount for construction management educators when designing a course and attempting to convey the value of foundational estimating skills while acknowledging the existence of more technologically advance estimating methods. Limitations and opportunities for further research are discussed.     

Effect of Silicon and Graphite Degeneration on High-Temperature Oxidation of Ductile Cast Irons in Open Air

Oxidation of Metals - The use of high silicon ductile irons is increasing as they offer some advantages with respect to conventional pearlitic–ferritic grades such as high elongation at...     

Experimental Design Applied for Cost and Efficiency of Antioxidants in Biodiesel

Oxidation stability is a parameter of great importance for biodiesel quality control to both producers and subsequent consumers. To maintain the quality of biodiesel, currently the most effective and economical method is the addition of antioxidants that prevent or retard the biofuel oxidation reaction. In this study, efficiency and cost of synthetic antioxidants added to B100 biodiesel from soybean oil and pork fat were evaluated, using butylhydroxyanisole (BHA), butylhydroxytoluene (BHT) and tert-butylhydroquinone (TBHQ), in pure form or in mixtures, according to a simplex-centroid mixture experimental design. Results demonstrate an increased induction period (IP) in all trials when compared to the control sample, and TBHQ was the only antioxidant alone that met all the specification standards, while BHT and BHA alone met only the American standard specifications. The antioxidant mixture that presented the highest synergistic effect was that of TBHQ and BHA. Multi-response optimization indicated an optimum formulation containing 75 % TBHQ and 25 % BHA with an IP of 7.27 h at 110 °C and the antioxidant mixture cost of 31.31 USD, to be added for a ton of biodiesel. This simplex-centroid mixture experimental design shows an ability to be applied in the biodiesel, oils and fats industry to evaluate the oxidation stability and the occurrence of synergism between different mixtures of synthetic or natural antioxidants and their costs.