Circadian rhythm of fatty acid desaturation in mouse liver

A study was made of the diurnal changes in liver microsomal desaturation of labeled stearic, linoleic and α-linolenic acids to oleic, γ-linolenic and octadeca-6,9,12,15-tetraenoic acids, respectively. C3H-S mice were used and were exposed to light-dark cycles. A circadian rhythm was observed for stearic acid desaturation, and a different one for linoleic acid. Linoleic and α-linolenic desaturation had similar responses in the day cycle. This would indicate that different mechanisms control the oxidative desaturations of the fatty acids in the 9 and 6 carbons. The fatty acid composition of the whole liver and liver microsomes also showed variations. Remarkable oscillations were observed for stearic and oleic acids. Neither the total protein synthesis nor the free fatty acid concentration in the microsomes followed a rhythm parallel to the desaturation of the studied fatty acids. The injection of cycloheximide 4 hr before measuring the desaturation modified the circadian variation of both the 9 and 6 desaturations. The modification induced by cycloheximide was considered to indicate that both variations are related to the synthesis of specific proteins but not to that of a degradative or inhibitory protein.     

The electrochemical behaviour of oxygen and hydrogen peroxide on silver electrodes

The reduction of oxygen and the reduction and oxidation of hydrogen peroxide at silver electrodes is examined, with special reference to the side reactions involving the metal and its corrosion products.     

Photocatalytic oxidation of oxalic acid in dilute aqueous solution,in a fully illuminated fluidized bed reactor

A comprehensive kinetic model for the photooxidation of oxalic acid (C₂O₄H₄) in a fluidized bed (FB) of a TiO₂/quartz sand composite, in a UV-fully illuminated photoreactor, was developed and correlated with experimental results. A proper solution for the mass balance of the reacting system was achieved by combining the complete radiation field profile and the most recent and updated pathway for the adsorption and photodecomposition of oxalic acid onto TiO₂ (Mendive et al., 2007), which was employed to determine the kinetic expression and model parameters.     

Actuator fault estimation based on generalized learning observer for quasi-linear parameter varying systems

This article presents a generalized learning observer (GLO) design for the simultaneous estimation of states and actuator faults for polytopic quasi-linear parameter varying systems. The proposed approach is based on the use of a GLO, which generalized the existing results on the proportional-integral observers. Conditions of existence and stability of the observer are given through the stability analysis in the sense of Lyapunov. Its design is obtained in terms of a set of linear matrix inequalities. The performance of the proposed method is evaluated by simulation in a one-link-flexible joint robot system.     

Stabilized β-Bi2O3 nanoparticles from (BiO)4CO3(OH)2 precursor and their photocatalytic properties under blue light

Stabilized tetragonal Bi₂O₃ nanoparticles (β-Bi₂O₃) were obtained by annealing treatments of amorphous Bi-based precursors, obtained by chemical precipitations, at temperatures between 350 and 450?°C. The formation of the stabilized β-Bi₂O₃ phase was possible by using (BiO)₄CO₃(OH)₂ while other precursors such as amorphous bismuth carbonate ((BiO)₂CO₃) and amorphous basic bismuth nitrate (Bi₆O₆(OH)₂(NO₃)₄·2H₂O) led to the formation of the thermodynamically stable monoclinic α-Bi₂O₃ and Bi₅O₇NO₃ phases. The Bi-based precursors were prepared by the chemical precipitation method at room temperature in ethylenediamine-solvent varying the HNO₃/Bi³⁺ molar ratio (10, 26 and 56). The physicochemical properties of the three as-prepared amorphous precursors and the formed-after-calcination β-Bi₂O₃, α-Bi₂O₃ and Bi₅O₇NO₃ phases were analyzed by X-ray diffraction, scanning electron microscopy, thermogravimetry, X-ray photoelectron spectroscopy (XPS), FTIR analysis, diffuse reflectance spectroscopy and surface area by BET method. The photocatalytic activity of all annealed solids containing the β-Bi₂O₃ phase was tested in the photodegradation of the indigo carmine (IC) dye under specific blue light. A schematic diagram of the Bi₂O₃ phases obtained as a function of the annealing conditions and initial amorphous precursor is proposed and explained in terms of the amount of CO₃^2-, NO₃^- and amine (ENH₂²⁺ ? ENH⁺) ions present in each bismuth precursor.     

Experimental Design Applied for Cost and Efficiency of Antioxidants in Biodiesel

Oxidation stability is a parameter of great importance for biodiesel quality control to both producers and subsequent consumers. To maintain the quality of biodiesel, currently the most effective and economical method is the addition of antioxidants that prevent or retard the biofuel oxidation reaction. In this study, efficiency and cost of synthetic antioxidants added to B100 biodiesel from soybean oil and pork fat were evaluated, using butylhydroxyanisole (BHA), butylhydroxytoluene (BHT) and tert-butylhydroquinone (TBHQ), in pure form or in mixtures, according to a simplex-centroid mixture experimental design. Results demonstrate an increased induction period (IP) in all trials when compared to the control sample, and TBHQ was the only antioxidant alone that met all the specification standards, while BHT and BHA alone met only the American standard specifications. The antioxidant mixture that presented the highest synergistic effect was that of TBHQ and BHA. Multi-response optimization indicated an optimum formulation containing 75 % TBHQ and 25 % BHA with an IP of 7.27 h at 110 °C and the antioxidant mixture cost of 31.31 USD, to be added for a ton of biodiesel. This simplex-centroid mixture experimental design shows an ability to be applied in the biodiesel, oils and fats industry to evaluate the oxidation stability and the occurrence of synergism between different mixtures of synthetic or natural antioxidants and their costs.     

Characterization of aqueous rubidium chloride as an equitransferent ultraconcentrated salt bridge

From e.m.f. measurements on the concentration cells Ag|AgCl|RbCl (m)RbCl (m _f)|AgCl|Ag and Rb-amalgam|RbCl (m _f)RbCl (m)Rb-amalgam, the ion and solvent transference numbers have been determined for aqueous RbCl solutions at molalities up to 7 mol kg^–1 over the temperature range from 25 to 55°C. From the ionic transference numbers found, aqueous RbCl emerges as the most closely equitransferent salt bridge ever characterized. Considering also its high solubility (7.8 mol kg^–1 at 25°C), RbCl is recommended as a built-in salt bridge for reference electrodes, in view of replacing the insufficiently equitransferent KCl bridges so far adopted by manufacturers.     

Global robust stabilization of nonlinear systems subject to input constraints

Our main purpose in this paper is to further address the global stabilization problem for affine systems by means of bounded feedback control functions, taking into account a large class of control value sets: p, r ‐weighted balls ??^m _r (p), with 1<p?∞, defined via p, r ‐weighted gauge functions. Observe that p=∞ is allowed, so that m‐dimensional r ‐hyperboxes ??^m _r (∞)?[?r₁^?,r₁⁺]×???×[?r_m^?,r_m⁺], r_j^±>0 are also considered. Working along the line of Artstein–Sontag's approach, we construct an explicit formula for a one‐parameterized family of continuous feedback controls taking values in ?? _r ^m(p) that globally asymptotically stabilize an affine system, provided an appropriate control Lyapunov function is known. The designed family of controls is suboptimal with respect to the robust stability margin for uncertain systems. The problem of achieving disturbance attenuation for persistent disturbances is also considered. Copyright © 2002 John Wiley & Sons, Ltd.     

Error Analysis for hp-FEM Semi-Lagrangian Second Order BDF Method for Convection-Dominated Diffusion Problems

We present in this paper an analysis of a semi-Lagrangian second order Backward Difference Formula combined with hp-finite element method to calculate the numerical solution of convection diffusion equations in ℝ². Using mesh dependent norms, we prove that the a priori error estimate has two components: one corresponds to the approximation of the exact solution along the characteristic curves, which is O(Dt²+h^m+1(1+\frac\mathopen|logh|Dt))O(\Delta t^{2}+h^{m+1}(1+\frac{\mathopen{|}\log h|}{\Delta t})); and the second, which is O(Dt^p+|| [(u)\vec]-[(u)\vec]_h||_L^￥)O(\Delta t^{p}+\| \vec{u}-\vec{u}_{h}\|_{L^{\infty}}), represents the error committed in the calculation of the characteristic curves. Here, m is the degree of the polynomials in the finite element space, [(u)\vec]\vec{u} is the velocity vector, [(u)\vec]_h\vec{u}_{h} is the finite element approximation of [(u)\vec]\vec{u} and p denotes the order of the method employed to calculate the characteristics curves. Numerical examples support the validity of our estimates.