Use of the task configuration system (TCS) for the design and on-line optimization of power plants operating with variable loads

The main purpose of this work is to show the ability of the TCS (task configuration system) to perform both the design and the operation optimization of power plants. The TCS is a module that permits to set the main task of each one of the equipments of the system and consequently setting how they respond to variable loads. In this work, the TCS was applied to a micro cogeneration plant of 60 kW in which both the electrical and the thermal loads were variable. Primarily, the design optimization of the nominal power of the equipments and of the TCS configuration was performed for the loads and electricity/fuel costs assumed in the design. After this operational optimizations in cases where the loads and electricity/fuel costs were doubled and then halved in relation to the standard case were performed. The results presented the TCS in a very robust way in most of the cases even the operational conditions being very different from the originally assumed. Based on the results, it is possible to defend the use of the TCS to decrease the risk of high initial investments made in cogeneration systems.     

An adaptive finite element scheme to solve fluid-structure vibration problems on non-matching grids

This paper deals with the computation of the vibration modes of a system consisting of a linear elastic solid interacting with an acoustic fluid. A finite element method based on meshes for each medium not matching on the fluid-solid interface is analyzed. Optimal order of convergence is proved for the approximation of the eigenfunctions, as well as a double order for the eigenvalues. Numerical tests confirming the theoretical results and showing the advantage of using non-matching grids are reported. Finally, an a posteriori error estimator for this method is introduced and combined with a mesh refinement strategy. The efficiency of this adaptive technique is tested with further numerical experiments. Received: 30 January 2001 / Accepted: 30 May 2001     

Assessment of Novel Water-Borne Coatings Obtained from Composite Latex Particles and Reinforced with TiO2 Nanotubes

Novel, environmentally friendly waterborne coatings were obtained from the filmification of nanostructured latex particles reinforced with inorganic nanotubes. The latex used to form the coatings consists of core-shell particles with a shell functionalized with different amounts of acrylic acid (AA). This external polymer layer was doped, in some cases, with TiO₂ nanotubes at three different concentrations: 100, 500 and 1000 ppm. The composite particles were synthesized in two steps by semi-continuous emulsion polymerization at 75°C. A series of films was prepared by employing core-shell particles with different sizes, core cross-linking and shell functionalization. The coatings obtained were characterized by infrared spectroscopy (FTIR), tapping mode atomic force microscopy (TM-AFM), scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and thermogravimetrical analysis (TGA). Drying rates and tests were also performed to further evaluate these films. It was observed that the addition of small amounts of TiO₂ nanotubes contributes to improve the application properties, mainly adhesion to metallic substrates and water impermeability. The resistance to thermal degradation was also strongly increased, as showed by the DSC and TGA analyses.     

An effective multipurpose building block for 3D electropolymerisation: 2,2′-Bis(2,2′-bithiophene-5-yl)-3,3′-bithianaphthene

Novel thiophene-based oligomer, 2,2′-bis(2,2′-bithiophene-5-yl)-3,3′-bithianaphthene (TX), was designed and synthesized, and its electrochemical and spectral properties characterised. TX was readily polymerised electrochemically to form well organized conducting homopolymer films on various solid electrode substrates. Moreover, it was successfully used for deposition by electropolymerisation of electrochemically active thin films of co-polymers with three different monomers of functionalised bis(2,2′-bithienyl)methane derivatives. It appeared that TX was an effective crosslinker and 3D promoter in these electropolymerisations involving co-monomers intrinsically showing limited aptitude for the electropolymerisation or forming polymer films of low conductivity. This attractive TX ability stems from combination of its (i) high conjugation efficiency in each of the two planar moieties, (ii) intrinsic 3D structure on account of the presence of the central node, and (iii) intrinsic regioselectivity in electropolymerisation on account of the positions of the two available free α-thiophene sites.     

Binary integer programming formulations for scheduling in market-driven foundries

This paper describes the development and solution of binary integer formulations for production scheduling problems in market-driven foundries. This industrial sector is comprised of small and mid-sized companies with little or no automation, working with diversified production, involving several different metal alloy specifications in small tailor-made product lots. The characteristics and constraints involved in a typical production environment at these industries challenge the formulation of mathematical programming models that can be computationally solved when considering real applications. However, despite the interest on the part of these industries in counting on effective methods for production scheduling, there are few studies available on the subject. The computational tests prove the robustness and feasibility of proposed models in situations analogous to those found in production scheduling at the analyzed industrial sector.     

Photocatalytic oxidation of oxalic acid in dilute aqueous solution,in a fully illuminated fluidized bed reactor

A comprehensive kinetic model for the photooxidation of oxalic acid (C₂O₄H₄) in a fluidized bed (FB) of a TiO₂/quartz sand composite, in a UV-fully illuminated photoreactor, was developed and correlated with experimental results. A proper solution for the mass balance of the reacting system was achieved by combining the complete radiation field profile and the most recent and updated pathway for the adsorption and photodecomposition of oxalic acid onto TiO₂ (Mendive et al., 2007), which was employed to determine the kinetic expression and model parameters.     

Modelling of mass transfer and texture evaluation during osmotic dehydration of melon under vacuum

The influence of vacuum time and solution concentration on mass transfer and mechanical properties of osmodehydrated melon cubes has been studied. Pulsed vacuum osmotic dehydration (PVOD) was carried out at 30 °C for 4 h, using sucrose solutions (40, 50 or 60°Brix) and applying a vacuum pulse (100 mbar for 5, 10 or 15 min). Kinetics of water loss, solid gain and stress at rupture were analysed, as well as effective diffusivities using the hydrodynamic model. The increase in solution concentration favoured water removal, but no significant effect of vacuum time was observed. The use of less concentrated solutions coupled to the action of vacuum pulse resulted in greater solid uptake. Samples subjected to PVOD using 60°Brix sucrose solution presented greater water loss, lower sugar uptake and better maintenance of fresh fruit texture throughout the process. Diffusion coefficients estimated by the hydrodynamic model showed a good fit to the experimental data.     

Elemental and mineral characterisation of Coastal Antarctic Aerosols in snow using PIXE and SEM-EDAX

The chemical constituents of snow from a 3 m pit sampled at a coastal Antarctic site were characterised by means of PIXE and SEM-EDAX. Oxygen isotope dating revealed that the pit spanned an 8-year period, from 1986 to 1994. Concentrations measured by PIXE ranged from less than 1 ng g⁻¹ of H₂O for Cu, and Zn to several tens of ng g⁻¹ for Si, S and Cl. The major elements found were Si, S, Al, and Na, which contributed more than 75% of the element loading. Snow layers with elevated Cl concentration were regularly found along the pit. The mineralogy of the insoluble particles determined by SEM-EDAX analyses showed that quartz, plagioclase and clays were the prevalent minerals. The proportion of each element in the insoluble phase was comparable with that previously found in similar studies.