Effect of surface roughness and stainless steel finish on Listeria monocytogenes attachment and biofilm formation

The purpose of this study was to evaluate the effect of surface roughness (Ra) and finish of mechanically polished stainless steel (Ra = 0.26 +/- 0.05, 0.49 +/- 0.10, and 0.69 +/- 0.05 microm) and electropolished stainless steel (Ra = 0.16 +/- 0.06, 0.40 +/- 0.003, and 0.67 +/- 0.02 microm) on Listeria adhesion and biofilm formation. A four-strain cocktail of Listeria monocytogenes was used. Each strain (0.1%) was added to 200 ml of tryptic soy broth (TSB), and coupons were inserted to the mixture for 5 min. For biofilm formation, coupons with adhesive cells were incubated in 1:20 diluted TSB at 32 degrees C for 48 h. The experiment was performed by a randomized block design. Our results show that the level of Listeria present after 48 h of incubation (mean = 7 log CFU/cm2) was significantly higher than after 5 min (mean = 6.0 log CFU/cm2) (P < 0.01). No differences in initial adhesion were seen in mechanically finished (mean = 6.7 log CFU/cm2) when compared with electropolished stainless steel (mean = 6.7 log CFU/cm2) (P > 0.05). Listeria initial adhesion (values ranged from 5.9 to 6.1 log CFU/cm2) or biofilm formation (values ranged from 6.9 to 7.2 log CFU/cm2) was not significantly correlated with Ra values (P > 0.05). Image analysis with an atomic force microscope showed that bacteria did not colonize the complete surface after 48 h but were individual cells or grouped in microcolonies that ranged from 5 to 10 microm in diameter and one to three cell layers in thickness. Exopolymeric substances were observed to be associated with the colonies. According to our results, electropolishing stainless steel does not pose a significant advantage for food sanitation over mechanically finished stainless steel.     

Germin-like protein Cit s 1 and profilin Cit s 2 are major allergens in orange (Citrus sinensis) fruits

Oranges are clinically relevant allergenic foods. To date, orange allergens have not been characterized in detail. The study is aimed at analyzing the sensitization profile in orange-sensitized subjects with and without clinical allergy, and to identify orange allergens. Fifty-six sensitized subjects with self-reported reactions to orange were grouped into reactors (anaphylaxis or multiple episodes of immediate reactions and/or positive challenge tests) and non-reactors (negative open food challenge tests). Allergens were characterized by IgE immunoblotting, N-terminal sequencing, IgE-inhibition assays, and mediator release assays were performed to determine the allergenic potency of orange profilin. Of 56 subjects, 23 were classified as orange allergic showing mainly an oral allergy syndrome. Of 23 subjects classified as orange allergic, 22 were sensitized to profilin, Cit s 2. In patients with mono-sensitization to profilin in vitro histamine releases up to 75% from basophils were induced using orange extract and purified plant profilins. Of the allergic patients 78% were sensitized to germin-like protein, Cit s 1. Both allergens showed retained IgE reactivity in heat-processed orange juice. Interestingly, subjects with and without clinical allergy showed a comparable sensitization profile. Profilin and germin-like proteins are major orange allergens. The potential clinical relevance of orange profilin was indicated by its strong capacity to release histamine from basophils. However, a predominant sensitization to both allergens in subjects without symptoms also indicates a high frequency of clinically insignificant sensitization.     

Defect-Chemical Aspects in the Synthesis of Metallic Conductors La1–xBaxCuO3 (x= 0.0 to 0.5)

Compositions of La_{1- x} Ba _x CuO₃, where x ranges from 0.0 to 0.5, were fired in air, oxygen-enriched air, and oxygen. Studies show that BaO cannot make a solid solution with LaCuO₃ without changing the basic structure. The resulting phases, in all attempts, were the binary compounds La₂CuO₄, La_{1- x} Ba _x CuO_3-δ ( x = 0.2 to 0.5), or their mixtures. All samples showed metallic conductivity. Extra oxygen in the reaction atmosphere appeared to encourage the formation of the LaCuO₃-based phases of La_{1- x} Ba _x CuO_3-δ ( x = 0.2 or 0.5). We provide a defect-chemical and thermodynamical explanation for this observation.     

Application of solar thermal desorption to remediation of mercury-contaminated soils

Solar thermal desorption at temperatures up to 500 °C is an innovative technology applied to the removal of mercury and arsenic from soil polluted by mining operations. As the soil is heated in a low and high-temperature solar system, the pollutant vapor pressure rises, producing mass transfer to the gas phase, which is then extracted by vacuum pumps and blower systems.In the UPC low-temperature experiments, removal of mercury from the polluted soil was as much as 76%. The experimental results show that volatilization of mercury is only significant when the temperature is above approximately 130 °C, which agrees with the predominant mercury solid phases detected. PSA middle-temperature experiments, showed that when soil and mine waste samples were heated to 400-500 °C, mercury elimination was significant (41.3-87%). However, the results from heating to 320 °C or below 300 °C, indicated little or negligible removal, possibly, because the fluid dynamics in the fluidized-bed module and the presence of cinnabar and pyrite rich-Hg as dominant mineral phases.These results show the potential for efficiently removing mercury and other pollutants from solid matrices (soil, waste, etc.) at low temperatures.     

Adsorption of 4-chlorophenol by inexpensive sewage sludge-based adsorbents

Sewage sludge was used as precursor to develop a potential inexpensive adsorbent by both simple drying and pyrolysis. The resulting materials were evaluated as adsorbents for the removal of 4-chlorophenol (4-CP) from aqueous solution. The dried biosolids showed a BET surface area lower than 3 m²/g, which yield a maximum adsorption capacity of 0.73 mmol 4-CP/g at pH 5.0 and 15 °C. The carbonization of biosolids under relatively mild conditions allowed obtaining materials with BET surface area up to 45 m²/g, which led to a significant increase of the maximum adsorption capacity (1.36 mmol 4-CP/g). The high ash content of the starting material (23%, d.b.) limits the development of porosity on a total dry-weight basis. Adsorption data were well fitted to the Redlich–Peterson isotherm equation whereas the most commonly used Langmuir and Freundlich equations were less satisfactory probably because of the occurrence of summative adsorption phenomenon. A thermodynamic study of the adsorption showed the spontaneous and exothermic nature of the process. Thus, simple drying and carbonization provide two ways of valorization of sewage sludge through its conversion into inexpensive low-rank adsorbents potentially useful for the removal of some hazardous water pollutants, like chlorophenols and related compounds.     

Neighborhood sociodemographics and change in built infrastructure

While increasing evidence suggests an association between physical infrastructure in neighborhoods and health outcomes, relatively little research examines how neighborhoods change physically over time and how these physical improvements are spatially distributed across populations. This paper describes the change over 25 years (1985–2010) in bicycle lanes, off-road trails, bus transit service and parks, and spatial clusters of changes in these domains relative to neighborhood sociodemographics in four US cities that are diverse in terms of geography, size, and population. Across all four cities we identified increases in bicycle lanes, off-road trails, and bus transit service, with spatial clustering in these changes that related to neighborhood sociodemographics. Overall, we found evidence of positive changes in physical infrastructure commonly identified as supportive of physical activity. However, the patterning of infrastructure change by sociodemographic change encourages attention to the equity in infrastructure improvements across neighborhoods.     

Evaluation of hydrogen metabolism by Escherichia coli strains possessing only a single hydrogenase in the genome

The four hydrogenase isozymes; hydrogenase 1 (Hyd-1), hydrogenase 2 (Hyd-2), hydrogenase 3 (Hyd-3) and hydrogenase 4 (Hyd-4) of Escherichia coli have been reported for their crucial functions in the hydrogen metabolism; however, their distinctive roles could not be completely understood. In this study, four ideal hydrogenase operon mutants, Δhyb hyc hyf, Δhya hyc hyf, Δhya hyb hyf, and Δhya hyb hyc, in which only a single hydrogenase is intact in the genome, were constructed as well as one quadruple mutant (Δhya hyb hyc hyf) that all four hydrogenase operons were deleted. First, single operon mutants and single-gene mutants for each hydrogenase showed different hydrogen productivity and growth in the anaerobic fermentation, indicating that bacterial phenotype regarding the hydrogen metabolism via the deletion of each operon is different with that of each single gene. Then, 4 triple hydrogenase operon mutants and one quadruple mutant were investigated to evaluate the hydrogen metabolism (hydrogen production and uptake) using glucose or glycerol as a substrate of hydrogen fermentation. With both the carbon sources, only Hyd-2 and Hyd-3 were able to produce hydrogen. Furthermore, all the hydrogenases showed hydrogen uptake activity. In addition, no hydrogen production and hydrogen uptake were detected in the quadruple mutant which does not have all 4 hydrogenases. Hydrogen production from Hyd-2 and Hyd-3 was further confirmed by complementing their operons in the cloning vector pBR322.     

Analytic solution for planar indeterminate impact problems using an energy constraint

This work proposes an analytic method for resolving planar multi-point indeterminate impact problems for rigid-body systems. An event-based approach is used to detect impact events, and constraints consistent with the rigid-body assumption are used to resolve the indeterminacy associated with multi-point impact analysis. The work-energy relation is utilized to determine post-impact velocities based on an energetic coefficient of restitution to model energy dissipation, thereby yielding an energetically consistent set of post-impact velocities based on Stronge’s energetic coefficient of restitution for the treatment of rigid impacts. The effect of stick–slip transition is analyzed based on Coulomb friction. This paper also discusses the transition from impact to contact. This analysis is essential for considering the rocking block problem that is used as an example herein. The predictions of the model for the rocking block problem are compared to experimental results published in the literature. An example of a planar ball undergoing two-point impact is also presented.     

GidaBot: a system of heterogeneous robots collaborating as guides in multi-floor environments

Intelligent Service Robotics - GidaBot is an application designed to set up and run a heterogeneous team of robots to act as tour guides in multi-floor buildings. Although the tours can go through...     

Age and productivity as determinants of firm survival over the industry life cycle

This paper contributes to fill the gap between the literature on the determinants of firm survival and the empirical works on the industry life cycle (ILC). Using a representative sample of Spanish firms with 10 or more employees over the period 1993–2009, the role played by firm age and productivity in firm survival is empirically analysed across three stages of the life cycle of forty-seven 3-digit manufacturing sectors. In the ‘early’ stage of the ILC, firm age is negatively correlated with hazard rates while firm productivity is not. Firm productivity is associated with lower hazard in the ‘mature’ stage of the ILC, when competition is primarily efficiency-driven, while firm age does not play a significant role for firm survival. In the ‘intermediate’ stage, both age and productivity play a role in reducing firms’ hazard rates.