Microstructural Development of an AlNiBi Alloy and Influence of the Transient Horizontal Solidification Parameters on Microhardness

The combination of the structural and tribological properties presented by AlNiBi alloys has motivated us to establish, as the main objective of this study, the investigation of the microstructural evolution and its influence on the microhardness (HV) of Al-3wt pct Ni-1wt pct Bi alloy horizontally solidified via a water-cooled directional solidification device. Temperature mapping by thermocouples inserted in the metal has been performed for experimental determination of the solidification thermal parameters, such as the growth rate and cooling rate (V_L and T_R, respectively). The microstructure has been characterized by optical and scanning electron microscopy and by microanalysis of the composition via dispersive energy spectroscopy (EDS composition). The macrostructure of the as-solidified ingot is characterized by columnar grains, and the final microstructure consists of an Al-rich primary phase (α-Al) and a eutectic mixture composed of two phases: α-Al + Al₃Ni intermetallic (β) with Bi particles anchored on the β phase. The Bi droplet scale is affected by the thermal parameters. The primary phase (α-Al) is characterized by a reverse cellular-to-dendritic microstructural transition. Cellular and dendritic microstructures have been quantified by the cell, primary dendrite arm, secondary dendrite arm, and tertiary dendrite arm spacings (λ_C, λ₁, λ₂, and λ₃, respectively). The relationships of λ_C, λ₁, λ₂, and λ₃ with V_L and T_R have been established via power-type mathematical expressions. The HV dependence on λ_C, λ₁, λ₂, and λ₃ has been analyzed in both cellular and dendritic microstructural zones. It has been observed that the HV values do not vary in the dendritic zone; however, Hall–Petch’s mathematical equations characterize the HV variation with these thermal and microstructural parameters in the cellular zone.

     

Unveiling contamination sources and dissemination routes of Salmonella sp. in pigs at a Portuguese slaughterhouse through macrorestriction profiling by pulsed-field gel electrophoresis

Sixty-nine isolates of Salmonella sp. isolated from the ileum, tonsils, carcass and mandibular and ileocolic lymph nodes of individual pigs slaughtered for consumption in one abattoir were analyzed using serotyping and macrorestriction profiling by Pulsed-Field Gel Electrophoresis (RFLP-PFGE), in order to identify clonal relationships. XbaI macrorestriction was able to distinguish 18 genotypes among the eight identified serotypes: Salmonella Typhimurium (4 genotypes), Salmonella Rissen (3), Salmonella Tennessee (2), Salmonella Enteritidis (2), Salmonella 4,[5],12:i:- (4), Salmonella Give (1), Salmonella Anatum (1), and Salmonella Derby (1). Except for one sample, the serotype and the genotype identified in the samples from the same pork were always the same, allowing to unravel possible dissemination routes of Salmonella sp. through these pork tissues and equate presumptive sources of contamination or infection. Highly significant associations (p < 0.001) were observed for the presence of Salmonella sp. in the ileum and in the ileocolic lymph nodes, as well as between the carcass contamination and the presence of Salmonella sp. in others samples of the correspondent slaughtered pig, such as the ileum, the ileocolic and mandibular lymph nodes and the tonsils. Moreover, 80% of the pigs with ileum and ileocolic lymph nodes positive samples also presented the same salmonella genotype in the correspondent tonsils and, among pigs with positive tonsils, 70% also carried the same genotype in the corresponding mandibular lymph nodes. The occurrence of cross-contamination was also detected, since a genotype identified in other pigs slaughtered in the same day was found in 31% of positive carcasses. The global analysis of the genotypes suggested three different sources of pig infection: the farm of origin, the transportation and the lairage. A particular attention should be paid to the last one, since the majority of the isolates from pig samples were related to infection in the lairage. Since the presence of Salmonella sp. in the ileum of pigs and faeces ingestion promotes tonsils infection and internal dissemination of the agent through the mandibular lymph nodes, as well as drainage to the ileocolic lymph nodes, a potential risk exists at slaughter for Salmonella sp. contamination in the carcasses during pork processing. This risk may be increased by incorrect evisceration techniques and by hygienically inappropriate meat inspection procedures, especially those concerned to the mandibular lymph nodes incisions.     

Learning organisation and human resources management practices: an exploratory research in medium-sized enterprises undergoing a lean implementation

Despite the fact that Lean Manufacturing (LM) implementation has been widely discussed in the literature, a reduced number of works focus on medium-sized enterprises (MEs). Such gap becomes more evident when searching for works exploring the dimensions of learning organisation (DLO) that surround LM implementation in MEs. This paper aims at assessing DLO maturity and the importance of human resources management (HRM) practices in MEs that are starting LM implementation. We verify the applicability of a method for assessing maturity levels of DLO and HRM practices in seven different MEs. The method was originally conceived for large enterprises well advanced in the lean implementation process; it combines concepts of HRM and organisational learning with lean implementation roadmaps. Adapting the method for application in MEs allows such companies to anticipate and minimise organisational learning problems by conducting appropriate HRM practices, leading to a more effective LM implementation. We conclude that the method is a suitable diagnostic tool for MEs, indicating which phases of the lean roadmap are better prepared to be implemented.     

Numerical analysis of 3-D flow through LNG marine control valves for their advanced design

A numerical analysis of three dimensional incompressible turbulent flows through high pressure drop control valves was carried out by using a CFD-ACE code to develop anti-cavitation control valve used in LNG marine system. For this, numerical simulation was performed on several models of control valve that have different orifice diameters of anti-trim and the size of valve discharge. In this study, flow characteristics of control valves with complex flow fields including pressure drop, cavitation effect and variation of flow coefficient as well as correlation of discharge coefficient were investigated and analyzed. Comparing with conventional control valves, newly designed valves by using the CFD analysis showed an improved flow pattern with reduced cavitation and an anticipated performance characteristic. This paper was presented at the 9^th Asian International Conference on Fluid Machinery (AICFM9), Jeju, Korea, October 16–19, 2007.     

A simulation environment for performance analysis of HVAC systems

Due to the lack of a building simulation program that can simulate in details the combined heat, vapor, and liquid transfer in porous elements and the HVAC (heating, ventilation and air-conditioning) systems, a flexible computational algorithm has been elaborated in order to integrate models for both HVAC systems and multizone hygrothermal building model. In the algorithm, models for the primary system-composed of chiller, cooling tower, primary pumps, and condensation pumps—have been described. For the secondary system, models for the cooling and dehumidifying coil, humidifier, fan, and mixing box have been considered. Those mathematical models have been integrated into the whole-building PowerDomus simulation environment. The simulation environment is presented, and results show the usability aspects of the proposed computer environment by comparing air- and water-cooled equipment.     

RNA fingerprinting analysis of Oenococcus oeni strains under wine conditions

Oenococcus oeni is a lactic acid bacterium of economic interest used in winemaking. This bacterium is the preferred species for malolactic fermentation (MLF) due its adaptability to the chemically harsh wine environment. MLF enhances the organoleptic properties and ensures deacidification of wines.     

FGF10 inhibits dominant follicle growth and estradiol secretion in vivo in cattle

Fibroblast growth factors (FGFs) are involved in paracrine control of follicle development. It was previously demonstrated that FGF10 decreases estradiol (E(2)) secretion in granulosa cell culture and that theca cell FGF10 mRNA expression is decreased in healthy follicles from abattoir ovaries. The main objectives of this study were to evaluate FGF10 and FGFR2b mRNA expression during follicular development in vivo, to evaluate the effect of FGF10 on follicle growth using Bos taurus taurus cows as a model, and to gain more insight into the mechanisms through which FGF10 inhibits steroidogenesis. Messenger RNA encoding both FGF10 and FGFR2b (main FGF10 receptor) was significantly more expressed in subordinate follicles (SFs) than in dominant follicles (DFs). The intrafollicular injection of FGF10 into the largest growing follicle at 7-8?mm in diameter interrupted the DF growth in a dose-dependent manner (11±0.4, 8.3±1 and 5.9±0.3?mm for 0, 0.1, and 1?μg/ml FGF10, respectively, at 72?h after treatment; P<0.05). In a third experiment, follicles were obtained 24?h after FGF10 (1?μg/ml) or PBS treatment through ovariectomy. In theca cells, FGF10 treatment did not affect mRNA encoding steroidogenic enzymes, LHCGR and IGFBPs, but significantly upregulated FGF10 mRNA expression. The expression of CYP19A1 mRNA in granulosa cells was downregulated by FGF10 treatment, which was accompanied by a 50-fold decrease in E(2) production, and decreased cyclin D2 mRNA. These results have shown that FGF10 and its receptor FGFR2b are more expressed in SFs and provide solid in vivo evidence that FGF10 acts as an important regulator of follicular growth in cattle.     

Synergistic action between Caryocar coriaceum Wittm. fixed oil with aminoglycosides in vitro

The oil obtained from the Caryocar coriaceum Wittm. (pequi) fruit pulp (C. coriaceum fixed oil – CCFO), rich in fatty acids, has been secularly employed by traditional medicine in the treatment of respiratory affections, skin inflammation, and wounds. These observations encouraged us to investigate the antimicrobial activity of CCFO and to investigate its effect in combination with aminoglycosides. The minimum inhibitory concentration (MIC) of CCFO alone and associated with aminoglycosides against Escherichia coli and Staphylococcus aureus strains were determined using microdilution assay. CCFO alone had a MIC of 512 µg/mL against E. coli and S. aureus resistant strains. Combining the CCFO with aminoglycosides reduced the MIC of aminoglycosides against the resistant strains of E. coli and S. aureus. The results obtained indicate that CCFO displays a significant synergistic antibiotic effect when combined with aminoglycosides, demonstrating that the oil constituents (fatty acids) may act as potentiators of the antibiotic activity of aminoglycosides. These properties make CCFO oil an interesting alternative as a remedy or nutraceutical against multiresistant bacteria, preventing the development of resistance by these microorganisms. Practical applications: This article demonstrates the capacity of the C. coriaceum oil to enhance the antibiotic activity of aminoglycosides. This activity could represent a new way to combat the growing bacterial resistance to antibiotics, an important problem of public health.     

Effects of different surface treatments of zirconia on the bond strength of self-adhesive resinous cement

Purpose: The aim of this study was to evaluate the effects of different zirconia surface treatments on the bond strength of two self-adhesive resinous cements (SARC).

Methods: Two hundred and eight cylindrical specimens were obtained from Y-TZP zirconia (half with diameter 3.2 mm and half with 4.8 mm). After sintering and polishing, specimens were divided into four groups (n = 26), according to surface treatment: Control (no treatment); Sandblasting (Al₂O₃ particles); Rocatec (Al₂O₃ particles, tribochemical silica coating and silane application); Laser (Nd: YAG laser: 20 Hz, 100 mJ, 0.2 J/cm²). The surface roughness (Ra) was evaluated after the surface treatments, and the groups were divided into two subgroups (n = 13), according to the SARC tested: RelyX U200 and Bifix SE. The 2.2-mm cylinders were bonded to 4.8-mm cylinders and stressed until failure under shear using a universal testing machine. Bond strength and Ra were analyzed using ANOVA, and Tukey’s test (α = 0.05).

Results: Surface treatment was significant (p < 0.0001), but cement type (p = 0.73) was not. Related to roughness, significant differences were found for the treatment type (p < 0.0001), with laser being the treatment with higher Ra values.

Conclusions: Nd:YAG laser produced a rougher surface and a higher bond strength compared with sandblasting, silicatization, and control groups.     

Measurement of the Energy Spectrum of the Neutrons inside the Neutron Flux Trap Assembled in the Center of the Reactor Core IPEN/MB-01

This paper presents the neutron energy spectrum in the central position of a neutron flux trap assembled in the core center of the research nuclear reactor IPEN/MB-01, obtained by an unfolding method. To this end, we have used several different types of activation foils （Au, Sc, Ti, Ni, and plates） which have been irradiated in the central position of the reactor core （setting number 203） at a reactor power level （64.57±2.91 watts）. The activation foils were counted by solid-state detector HPGe （high pure germanium detector） （gamma spectrometry）. The experimental data of nuclear reaction rates （saturated activity per target nucleus） and a neutron spectrum estimated by a reactor physics computer code are the main input data to get the most suitable neutron spectrum in the irradiation position obtained through SANDBP （spectrum analysis neutron detection code-version Budapest University） code： a neutron spectra unfolding code that uses an iterative adjustment method. the integral neutron flux, （2.41 ± 0.01） × 10^9 n·cm^-2·s^-1 for the thermal The adjustment resulted in （3.85 ± 0.14） × 10^9 n·cm^-2·s^-1 for neutron flux, （1.09 ±0.02） × 10^9n·cm^-2·s^-1 for intermediate neutron flux and （3.41 ± 0.02） × 10^8 n·cm^-2·s^-1 for the fast neutrons flux. These results can be used to verify and validate the nuclear reactor codes and its associated nuclear data libraries, besides, show how much effective it can be that the use of a neutron flux trap in the nuclear reactor core to increase the thermal neutron flux without increase the operation reactor power level. The thermal neutral flux increased 4.04 ± 0.21 times compared with the standard configuration of the reactor core.