GC/MS characterization of effluents front the ozone bleaching of eucalypt kraft pulps

Concerns regarding the possible environmental effects of organochlorine by‐products from bleaching of pulp with chlorine‐based compounds have led to the pulp and paper industry developing new bleaching sequences. Ozone, oxygen and hydrogen peroxide are the main reagents in these Totally Chlorine Free (TCF) bleaching processes.

In this study, eucalypt kraft pulps from a variety of Australian wood sources were subjected to bleaching sequences comprising oxygen, ozone and hydrogen peroxide/alkali extraction stages. The aqueous liquid effluents from each stage were analyzed by GC/MS for aldehydes, ketones, alcohols, carboxylic acids and other by‐products. Pentafluorobenzyl oxime derivatives of the aldehydes and ketones were analyzed by electron impact GC/MS. The major carbonyl compounds detected were formaldehyde, glyoxal, dimethylglyoxal and acetone. An homologous series of n‐aldehydes corresponding to cleavage of ω‐3, 6, 9 and 12 unsaturated fatty acids also was detected. Aromatic aldehydes were identified in the oxygen stage and high consistency ozone stages, but not in any medium consistency ozone or post‐ozone bleach stages. In all stages a series of saturated alkyl carboxylic acids from formic to octacosanoic acid was detected. Formic and acetic acids were present in the highest yield. Only trace quantities of unsaturated fatty acids were detected. Details of these and other compounds detected are discussed.     

Chemical control of colloidal fouling of reverse osmosis systems

Fouling of membranes by colloidal organic and inorganic particles continues to be documented as the most common and challenging obstacle in attaining stable continuous operation of reverse osmosis (RO) and ultrafiltration (UF) systems. Much current research is being conducted on physical parameters to mitigate such fouling. The focus has been on membrane synthesis and element design; microfiltration and ultrafiltration pretreatment; electromagnetic devices; correlation with physical factors such as Silt Density Index, zeta potential and critical flux; technique of direct observation of fouling process through a membrane; and classification of macromolecular organics for correlation with fouling characteristics. We report initial successes with chemical control of colloidal fouling. Through screening with a large number of observable coagulations of natural colloids, we have developed a group of proprietary anticoagulants and dispersants that would, at less than 10 ppm dosage to the RO feedwater, control various classes of colloidal foulants. Case studies of the control of humic matter, elemental sulfur and colloidal silicate in problematic RO systems that became stabilized are briefly presented. We conclude that a great need and potential exists in economically controlling the myriads of fouling interactions of colloidal particles during concentration within the brine channels of RO membrane elements. Low dosages of antifoulants can in many cases obviate the need for installation and maintenance of pretreatment unit or operations designed to remove such colloidal foulants from the process stream.     

Guanine and plasmid DNA binding of mono- and trinuclear fac-[Re(CO)3]+ complexes with amino acid ligands

We have synthesized and fully characterized four new complexes comprising the fac-[Re(CO)3]+ moiety and the ligands NH3, L-proline (Pro), or N,N-dimethylglycine (dmGly). The reaction of [Re(H2O)3(CO)3]+ with the two amino acids gives trinuclear complexes of general formula [Re(L)(CO)3]3 (where L = amino acid). We have studied the in vitro behavior of these compounds with guanine and DNA in order to understand whether the cytotoxicity exhibited by certain rhenium complexes based on the fac-[Re(CO)3]+ core is due to the formation of nucleobase complexes and inter- or intrastrand links between DNA bases. We have performed model studies with guanine and studied the structural effects induced by different rhenium(I) tricarbonyl complexes on PhiX174 plasmid DNA by electrophoretic methods. Our results show that rhenium complexes with two available coordination sites interact with plasmid DNA to form a stable adduct that is likely to involve two bases.     

Characterization of chemicals mediating ovipositional host-plant finding byAmyelois transitella females

Ovipositional host-finding in the navel orangeworm,Amyelois transitella (Walker), is brought about by an in-flight response to host odors. Wind-tunnel studies of the response of gravid females to almonds showed that this response is mediated primarily by long-chain fatty acids, particularly oleic acid and linoleic acid. Evidence for the behavioral activity of fatty acids is based on the fact that: (1) behavioral activity of almond oil was concentrated in a single liquid chromatographic fraction whose composition was predominantly long-chain fatty acids, (2) behavioral activity was lost when either almond oil or the active fraction of that oil was treated with diazomethane, (3) full activity was elicited by a selective extraction of free fatty acids from crude almond oil, and (4) upwind response by females was elicited by a blend of synthetic oleic and linoleic acids, albeit at a level less than that elicited by almond oil. Five fatty acids identified from the almond oil were: myristic acid (1%), palmitic acid (16%), stearic acid (3%), oleic acid (58%), and linoleic (22%). Attraction to various combinations of synthetic acids was observed only when oleic acid was present, and oleic acid elicited upwind flights to the source when presented alone; however, short-range responses were enhanced by the addition of linoleic acid, which elicited no long-range orientation by itself. Despite significant levels of attraction to synthetic blends, the percentage of females flying to the source was lower than that flying to acidulated almond oil, the best natural attractant tested. Thus, although longrange response may be mediated primarily by a blend of oleic and linoleic acids, additional and as yet unidentified components must also play an important role. Long-range chemically modulated host finding in this and other generalist plant feeders is discussed with respect to current models of the evolution of host finding, and it is argued that suggestions that long-range host finding should be correlated with narrowness of host utilization are logically flawed and are not supported by our current understanding of specific examples of host finding.     

An NMR study of the dissociation of N,N′-(2-propyloximino)-4,4′-methylenebis(phenylcarbamate) and its crosslinking of polymers containing labile hydrogens. II

Nuclear magnetic resonance spectroscopy has been used to study the dissociation and reaction of N,N′-(2-propyloximino)-4,4′-methylenebis(phenylcarbamate), as a crosslinking agent for polymers containing labile hydrogens. The crosslinking of poly(acrylic acid), polyacrylamide, and poly(vinyl alcohol) was found to result upon heating each to 150°C for 10 min with this component at 2–10 wt %.     

Microstructure of high modulus solid state extruded polyethylene: 2. X-ray scattering studies of 12, 24 and 36 extrusion draw ratio

The microstructure of a series of solid state extruded polyethylene fibres was examined by wide- and small-angle X-ray scattering. By measuring absolute intensities using a two dimensional position sensitive detector, accurate values of the small-angle invariant for anisotropic samples were obtained. This measurement coupled with wide-angle X-ray scattering and d.s.c. permitted determination of the density of the noncrystalline component. The use of a two phase model for solid state extruded polyethylene is justified if consideration is given to the effective densities of the crystalline and noncrystalline phases, which change with deformation. The effective density of the crystalline phase decreases by 1% (0.999–0.990 g cm^?3) from the unextruded billet compared to a 36 draw ratio extrudate, while the noncrystalline phase density increases by 6% (0.84–0.89 g cm^?3). These changes lead to an overall decrease in the mean squared electron density fluctuation of 63%. The average axial crystallite length measured by wide-angle X-ray scattering increases with extrusion draw ratio while the SAXS long period decreases and weakens considerably. These observations and the electron microscopy results from the previous paper, (Polymer, 1982, 23, 1069), are fully consistent with the key features of the Peterlin model of fibre microstructure.     

Hydroisomerization of Renewable and Fossil n-Alkanes over Bifunctional Dealuminated ZSM-5 Catalysts

The hydroisomerization of two long-chain n-alkane mixtures was investigated over bifunctional Pt/H-ZSM-5 catalysts before and after dealumination of preshaped zeolite/binder pellets. The hydroisomerization over the dealuminated catalysts leads to more isomers and less cracking products. Consequently, higher ratios of multi- to mono-branched isomerization products are formed as expected for large- rather than medium-pore zeolites. This indicates a higher availability of space in the vicinity of the active sites and provides an attractive route to make medium-pore zeolites suitable for upgrading higher boiling hydrocarbon feeds.     

A new method for evaluating the subjective image quality of photographs: dynamic reference

The Dynamic Reference (DR) method has been developed for subjective image quality experiments in which original or undistorted images are unavailable. The DR method creates reference image series from test images. Reference images are presented to observers as a slide show prior to evaluating their quality. As the observers view the set of reference images, they determine the overall variation in quality within the set of test images. This study compared the performance of the DR method to that of the standardized absolute category rating (ACR) and paired comparison (PC) methods. We measured the performance of each method in terms of time effort and discriminability. The results showed that the DR method is faster than the PC method and more accurate than the ACR method. The DR method is especially suitable for experiments that require highly accurate results in a short time.     

A gain and bandwidth enhanced transimpedance preamplifier for Fourier-transform ion cyclotron resonance mass spectrometry

The nature of the ion signal from a 12-T Fourier-transform ion cyclotron resonance mass spectrometer and the electronic noise were studied to further understand the electronic detection limit. At minimal cost, a new transimpedance preamplifier was designed, computer simulated, built, and tested. The preamplifier design pushes the electronic signal-to-noise performance at room temperature to the limit, because of its enhanced tolerance of the capacitance of the detection device, lower intrinsic noise, and larger flat mid-band gain (input current noise spectral density of around 1 pA/√Hz when the transimpedance is about 85 dBΩ). The designed preamplifier has a bandwidth of ~3 kHz to 10 MHz, which corresponds to the mass-to-charge ratio, m/z, of approximately 18 to 61 k at 12 T. The transimpedance and the bandwidth can be easily adjusted by changing the value of passive components. The feedback limitation of the circuit is discussed. With the maximum possible transimpedance of 5.3 MΩ when using an 0402 surface mount resistor, the preamplifier was estimated to be able to detect ~110 charges in a single scan.     

On the human ability to discriminate audio ambiances from similar locations of an urban environment

When developing advanced location-based systems augmented with audio ambiances, it would be cost-effective to use a few representative samples from typical environments for describing a larger number of similar locations. The aim of this experiment was to study the human ability to discriminate audio ambiances recorded in similar locations of the same urban environment. A listening experiment consisting of material from three different environments and nine different locations was carried out with nineteen subjects to study the credibility of audio representations for certain environments which would diminish the need for collecting huge audio databases. The first goal was to study to what degree humans are able to recognize whether the recording has been made in an indicated location or in another similar location, when presented with the name of the place, location on a map, and the associated audio ambiance. The second goal was to study whether the ability to discriminate audio ambiances from different locations is affected by a visual cue, by presenting additional information in form of a photograph of the suggested location. The results indicate that audio ambiances from similar urban areas of the same city differ enough so that it is not acceptable to use a single recording as ambience to represent different yet similar locations. Including an image was found to increase the perceived credibility of all the audio samples in representing a certain location. The results suggest that developers of audio-augmented location-based systems should aim at using audio samples recorded on-site for each location in order to achieve a credible impression.