Ultrafine particles from diesel vehicle emissions at different driving cycles induce differential vascular pro-inflammatory responses: Implication of chemical components and NF-κB signaling

Background

Nanometer silicon dioxide (nano-SiO₂) has a wide variety of applications in material sciences, engineering and medicine; however, the potential cell biological and proteomic effects of nano-SiO₂ exposure and the toxic mechanisms remain far from clear.

Results

Here, we evaluated the effects of amorphous nano-SiO₂ (15-nm, 30-nm SiO₂). on cellular viability, cell cycle, apoptosis and protein expression in HaCaT cells by using biochemical and morphological analysis, two-dimensional differential gel electrophoresis (2D-DIGE) as well as mass spectrometry (MS). We found that the cellular viability of HaCaT cells was significantly decreased in a dose-dependent manner after the treatment of nano-SiO₂ and micro-sized SiO₂ particles. The IC₅₀ value (50% concentration of inhibition) was associated with the size of SiO₂ particles. Exposure to nano-SiO₂ and micro-sized SiO₂ particles also induced apoptosis in HaCaT cells in a dose-dependent manner. Furthermore, the smaller SiO₂ particle size was, the higher apoptotic rate the cells underwent. The proteomic analysis revealed that 16 differentially expressed proteins were induced by SiO₂ exposure, and that the expression levels of the differentially expressed proteins were associated with the particle size. The 16 proteins were identified by MALDI-TOF-TOF-MS analysis and could be classified into 5 categories according to their functions. They include oxidative stress-associated proteins; cytoskeleton-associated proteins; molecular chaperones; energy metabolism-associated proteins; apoptosis and tumor-associated proteins.

Conclusions

These results showed that nano-SiO₂ exposure exerted toxic effects and altered protein expression in HaCaT cells. The data indicated the alterations of the proteins, such as the proteins associated with oxidative stress and apoptosis, could be involved in the toxic mechanisms of nano-SiO₂ exposure.     

Valorization of fatty acid waste for bioplastics production using Bacillus tequilensis: Integration with dark-fermentative hydrogen production process

Synthesis of bioplastics (polyhydroxyalkanoates (PHA)) using Bacillus tequilensis, a newly isolated strain was investigated under aerobic condition using designed wastewater with synthetic acids (SA) and acidogenic fermented food waste (AFW) collected from biohydrogen (H₂) producing anaerobic bioreactors as substrates. The isolate showed the ability to grow and accumulate PHA in both the substrates, with simultaneous waste remediation. Higher PHA synthesis was observed with SA (59% dry cell weight) compared to AFW (36% dry cell weight) with good substrate removal (SA, 87%; AFW, 59%). The PHA composition showed presence of co-polymer [P(3HB-co-3HV)] with varying contents of hydroxy butyrate (HB, 80–90%) and hydroxy valerate (HV, 10–15%) in both the substrates. High dehydrogenase activity was observed which leads to the formation of considerable quantity of PHA. AFW from H₂ producing reactor as substrate contributes in reducing the production cost of both H₂ as well as PHA embedded with waste valorization.     

Levels of knowledge in distributed systems

We correlate thelevel of knowledge of certain formulas in agroup of individuals with certain regular, downward closed, sets of strings. We show that in suitable circumstances, all such sets can occur as levels of knowledge but that the lack of synchrony, or the lack of asynchrony when there are only two processors in the group, can create more or less severe restrictions.     

Kinetics of hydrogenation of D-glucose to sorbitol

The kinetics of the heterogeneous reaction between hydrogen and aqueous solutions of D -glucose to produce sorbitol were studied in a high pressure Parr reactor. Raney-Ni was used as catalyst. The reaction between hydrogen and D -glucose was found to be very slow. In the agitated slurry reactor the diffusional aspects were completely eliminated and the reaction followed homogeneous kinetics. It was found to be first order with respect to both hydrogen and D -glucose. The values of the pseudo-first-order rate constants were found to be 1.5 × 10^?4 and 6.4 × 10^?4s^?1 at 398 and 435 K, respectively. The activation energy was found to be 64.8 kJ mol^?1.     

Formation of ethanol from carbon monoxide via a new microbial catalyst

A recently discovered clostridial bacteria converts components of synthesis gas (CO, CO₂, H₂) into liquid products such as ethanol, butanol and acetic acid. Isolated from an agricultural lagoon, the stability and productivity characteristics of the bacteria were studied in a continuous 4.5 l bubble column bioreactor at 37°C using artificial blends of CO, CO₂, and N₂. Preliminary results on the rates of cell growth, substrate utilization, product formation, and yields of products and cells from CO are discussed. At steady state, apparent yields (mole C in products per mole CO consumed) of ethanol, butanol, and acetic acid were 0.15, 0.075 and 0.025, respectively, and the cell yield was 0.25 g/mol CO. The theoretical yield of ethanol is 0.33 if CO is only utilized for the production of ethanol. The experimental yield of CO₂ from CO was approximately 60% compared to the theoretical yield of 67% with ethanol as the sole product. As a comparison with another ethanol-producing bacteria, the results of a similar fermentation study using batch-grown Clostridium ljungdahlii showed yields of 0.062 for ethanol and 0.094 for acetic acid and a cell yield of 1.378 g/mol.     

Theory of infrared microspectroscopy for intact fibers

Infrared microspectroscopy is widely used for the chemical analysis of small samples. In particular, spectral properties of small cylindrical samples are important in forensic analysis, understanding relationships between microstructure and mechanical properties in fibers or fiber composites, and development of cosmetics and drugs for hair. The diameters of the constituent cylinders are typically of the order of the central wavelength of light used to probe the sample. Hence, structure and material spectral response are coupled and recorded spectra are usually distorted to the extent of becoming useless for molecular identification. In this paper, we apply rigorous optical theory to predict the spectral distortions observed in IR microspectroscopic data of fibers. The theory is used, first, to compute the changes that are observed for cylinders of various dimensions under different instrument configurations when compared to the bulk spectrum from the same material. We provide a method to recover intrinsic material spectral response from fibers by correcting for distortion introduced by the cylindrical structure. The theory reported here should enable the routine use of IR microspectroscopy and imaging for the molecular analysis of cylindrical domains in complex materials.     

Gray-box identification of dynamic models for the bleaching operation in a pulp mill

The development and application of gray-box identification techniques for modelling the bleaching operation in a Bleached Chemi-Thermo Mechanical Pulp (BCTMP) mill are explained. The process is characterized as a delay dominant recycle process with significant input nonlinearities. The identification was carried out using routine operating data in which the outputs were measured irregularly. The effects of these characteristics and consequent modifications of the system identification techniques are discussed. The resulting models are being used for online prediction and model-based controller design at the mill with satisfactory performance.     

Assessment of integrity of components in piping of 500 MWe PHWR: using R-6 method

The primary heat transport system of 500 MWe Indian PHWR comprises of straight pipes, elbows and headers. A study was conducted to qualify piping system for leak before break. R-6 method was used to assess integrity of system for leakage size crack (LSC), the margins on crack initiation load and unstable crack growth loads. Option 2 (material specific failure assessment diagram), Category 3 (ductile tearing) analysis was used for straight pipes, elbows and header. In order to enhance the confidence in the analytical results, detailed sensitivity analysis was also performed. For sensitivity analysis, variation in material properties, LSC was considered. The effect of variation in temperature on material properties was also considered. Tensile and fracture properties used for base and weld material data were generated from pipe material obtained from 220 MWe Nuclear Power Plant, under construction.     

Studies on ionic salt of polyamic acid and related compounds

Amic acid compound namely bisphthalamic acid of 2, 2-dimethyl-4, 4-diaminobiphenyl (amic acid) and its ionic salt with 3-(dimethylamino)propyl methacrylate (amic acid salt) were synthesized and characterized by FT-IR, mass spectroscopy, NMR and DSC. Effect of temperature and water content on these compounds was studied by ¹H-NMR and potentiometric titration. In the absence of added water, both amic acid and its ionic salt had undergone imidization followed by hydrolysis, which was attributed to the water formed as a result of an initial imidization reaction. Polyamic acid (PAA) was synthesized by reacting 4, 4-oxydiphthalic anhydride and 2, 2-dimethyl 4, 4-diaminobiphenyl (m-tolidine) in N-methyl-2-pyrrolidone, which was then reacted with 3-(dimethylamino)propyl methacrylate to obtain PAS. Their storage stabilities were studied by monitoring their bulk viscosities and acid numbers as a function of time and temperature. PAS was found to be less stable than PAA. Similar observations were made for amic acid compounds. PAA and PAS showed two-step thermal degradation in air and nitrogen.