Performance analysis of earth-pipe-air heat exchanger for winter heating

Earth-pipe-air heat exchanger (EPAHE) systems can be used to reduce the heating load of buildings in winter. A transient and implicit model based on computational fluid dynamics is developed to predict the thermal performance and heating capacity of earth-air-pipe heat exchanger systems. The model is developed inside the FLUENT simulation program. The model developed is validated against experimental investigations on an experimental set-up in Ajmer (Western India). Good agreement between simulated results and experimental data is obtained. Effects of the operating parameters (i.e. the pipe material, air velocity) on the thermal performance of earth-air-pipe heat exchanger systems are studied. The 23.42 m long EPAHE system discussed in this paper gives heating in the range of 4.1-4.8 °C for the flow velocities 2-5 m/s. Investigations on steel and PVC pipes have shown that performance of the EPAHE system is not significantly affected by the material of the buried pipe. Velocity of air through the pipe is found to greatly affect the performance of EPAHE system.     

A novel adaptive sampling based methodology for feasible region identification of compute intensive models using artificial neural network

Identification of feasible region of operations in multivariate processes is a problem of interest in several fields. This is particularly challenging when the process model is black-box in nature and/or is computationally expensive, as analytical solutions are not available and the number of possible model evaluations is limited. An efficient methodology is required to identify samples where the model is evaluated for developing a computationally efficient surrogate model. In this work, an artificial neural network based surrogate model is proposed which is integrated with a statistical-based approach (Jack-knifing) to estimate the variance of the surrogate model prediction. This allows implementation of an adaptive sampling approach where new samples are identified close to the feasible region boundary or in regions of high prediction uncertainty. The proposed approach performs better than a previously published kriging based method for different dimensionality case studies.     

A Survey of Various Schedulers Used for Fair Bandwidth Allocation in WiMAX: IEEE 802.16

ABSTRACT

Wireless Interoperability for Multiple Access (WiMAX) is one of the emerging fields of high-speed wireless communication that has enormous capabilities due to its range and the connection speed. Like wireless local area networks (LANs), WiMAX networks implement multiple quality of service (QoS) frameworks at the Media Access Control (MAC) level for assured data, voice, and video services. The question of ensuring QoS is basically how to distribute available resources to users in order to satisfy QoS parameters such as latency, jitter and throughput requirements. IEEE 802.16 standard does not have any particular guidelines on scheduling of incoming and outgoing data. This has caught the attention of researchers working on WiMAX. This article discusses the various issues in WiMAX along with a classification of various scheduling approaches based upon the type of scheduler for the sake of better understanding the scheduling problem and analyzing various available theories.     

Low thermal conductivity in porous SiC–SiO2–Al2O3–TiO2 ceramics induced by multiphase thermal resistance

The introduction of multiple heterogeneous interfaces in a ceramic is an efficient way to increase its thermal resistance. Novel porous SiC–SiO₂–Al₂O₃–TiO₂ (SSAT) ceramics were fabricated to achieve multiple heterogeneous interfaces by sintering equal volumes of SiC, SiO₂, Al₂O₃, and TiO₂ compacted powders with polysiloxane as a bonding phase and carbon as a template at 600 °C in air. The porosity could be controlled between 66% and 74% by adjusting the amounts of polysiloxane and the carbon template. The lowest thermal conductivity (0.059 W/(m·K) at 74% porosity) obtained in this study is an order of magnitude lower than those (0.2–1.3 W/(m·K)) of porous monolithic SiC, SiO₂, Al₂O₃, and TiO₂ ceramics at an equivalent porosity. The typical specific compressive strength value of the porous SSAT ceramics at 74% porosity was 3.2 MPa cm³/g.     

Note: A portable pulsed neutron source based on the smallest sealed-type plasma focus device

Development and operation of a portable and compact pulsed neutron source based on sealed-type plasma focus (PF) device are reported. The unit is the smallest sealed-type neutron producing PF device. The effective volume of the PF unit is 33 cm(3) only. A compact size single capacitor (4 μF) is used as the energy driver. A battery based power supply unit is used for charging the capacitor and triggering the spark gap. The PF unit is operated at 10 kV (200 J) and at a deuterium gas filling pressure of 8 mb. The device is operated over a time span of 200 days and the neutron emissions have been observed for 200 shots without changing the gas in between the shots. The maximum yield of this device is 7.8 × 10(4) neutrons/pulse. Beyond 200 shots the yield is below the threshold (1050 neutrons/pulse) of our (3)He detector. The neutron energy is evaluated using time of flight technique and the value is (2.49 ± 0.27) MeV. The measured neutron pulse width is (24 ± 5) ns. Multishot and long duration operations envisage the potentiality of such portable device for repetitive mode of operation.     

Design of efficient lightweight strategies to combat DoS attack in delay tolerant network routing

Delay tolerant networks (DTNs) are characterized by delay and intermittent connectivity. Satisfactory network functioning in a DTN relies heavily on co-ordination among participating nodes. However, in practice, such co-ordination cannot be taken for granted due to possible misbehaviour by relay nodes. Routing in a DTN is, therefore, vulnerable to various attacks, which adversely affect network performance. Several strategies have been proposed in the literature to alleviate such vulnerabilities—they vary widely in terms of throughput, detection time, overhead etc. One key challenge is to arrive at a tradeoff between detection time and overhead. We observe that the existing table-based reactive strategies to combat Denial-of-service (DoS) attacks in DTN suffer from two major drawbacks: high overhead and slow detection. In this paper, we propose three secure, light-weight and time-efficient routing algorithms for detecting DoS attacks (Blackhole and Grey-hole attacks) in the Spray & Focus routing protocol. The proposed algorithms are based on use of a small fraction of privileged (trusted) nodes. The first strategy, called TN, outperforms the existing table-based strategy with 20–30 % lesser detection time, 20–25 % higher malicious node detection and negligible overhead. The other two strategies, CTN_MI and CTN_RF explore the novel idea that trusted nodes are able to utilize each others’ information/experience using their long range connectivity as and when available. Simulations performed using an enhanced ONE simulator reveals that investing in enabling connectivity among trusted nodes (as in CTN_RF) can have significant performance benefits.     

Two-stage decision making policy for opportunistic spectrum access and validation on USRP testbed

“Recently, various paradigms, for instance, device-to-device communications, LTE-unlicensed and cognitive radio based on an opportunistic spectrum access (OSA) are being envisioned to improve the average spectrum utilization. In OSA, secondary (unlicensed) users (SUs) need decision making policies (DMPs) to identify and transmit over optimum frequency bands without any interference to the primary (licensed) users as well as minimize the number of collisions among SUs. In this paper, we have proposed a two-stage DMP consisting of Bayesian Multi-armed Bandit algorithm to accurately characterize the frequency band statistics independently at each SU and frequency band selection scheme for orthogonalization of SUs. The analytical and simulation results show that the proposed DMP leads to 45% improvement in the average spectrum utilization compared to 36–39% in the existing DMPs. Furthermore, the number of collisions are 58.5% lower in the proposed DMP making SU terminals energy-efficient. The performance of the proposed DMP has been verified on the proposed USRP testbed in real radio environment and the experimental results closely match the simulated results .”     

Molecularly‐Engineered, 4D‐Printed Liquid Crystal Elastomer Actuators

Three‐dimensional structures that undergo reversible shape changes in response to mild stimuli enable a wide range of smart devices, such as soft robots or implantable medical devices. Herein, a dual thiol‐ene reaction scheme is used to synthesize a class of liquid crystal (LC) elastomers that can be 3D printed into complex shapes and subsequently undergo controlled shape change. Through controlling the phase transition temperature of polymerizable LC inks, morphing 3D structures with tunable actuation temperature (28 ± 2 to 105 ± 1 °C) are fabricated. Finally, multiple LC inks are 3D printed into single structures to allow for the production of untethered, thermo‐responsive structures that sequentially and reversibly undergo multiple shape changes.     

A Light Harvesting,Self‐Powered Monolith Tactile Sensor Based on Electric Field Induced Effects in MAPbI3 Perovskite

Organolead trihalide perovskite MAPbI₃ shows a distinctive combination of properties such as being ferroelectric and semiconducting, with ion migration effects under poling by electric fields. The combination of its ferroelectric and semiconducting nature is used to make a light harvesting, self‐powered tactile sensor. This sensor interfaces ZnO nanosheets as a pressure‐sensitive drain on the MAPbI₃ film and once poled is operational for at least 72 h with just light illumination. The sensor is monolithic in structure, has linear response till 76 kPa, and is able to operate continuously as the energy harvesting mechanism is decoupled from its pressure sensing mechanism. It has a sensitivity of 0.57 kPa^?1, which can be modulated by the strength of the poling field. The understanding of these effects in perovskite materials and their application in power source free devices are of significance to a wide array of fields where these materials are being researched and applied.