An empirical evaluation of P system testing techniques

This paper presents the existing techniques for P system testing and performs an empirical evaluation of their fault-detection efficiency. The comparison is performed using mutation testing and, based on the results obtained, some improved testing methodologies are proposed.     

Block architecture influence on the structure and mechanical performance of drawn polyurethane elastomers

Some natural biopolymers such as spider silk exhibit superb mechanical properties, characterised by their great toughness. Synthetic polyurethane (PU) copolymers also endow great toughness but lack silk's stiffness and strength. The aim of this work was to elucidate the role of segment block architectural features that influence PU stiffness and strength after cold drawing. For this purpose PUs with varied soft segment character, crystalline versus rubbery, as well as with different hard segment chemistries, 4,4′‐diphenylmethane diisocyanate/1,4‐butanediol versus 1,6‐hexamethylene diisocyanate/1,4‐butanediol, were synthesised by a two‐step polymerisation method. We found that the architecture of both block segments has a dramatic influence on drawn PU mechanical performance, in which PUs with crystallisable soft segments and crystalline hard segments are shown to have a greater impact on developing stiffer and stronger materials. © 2013 Society of Chemical Industry     

A review and critique on integrated production–distribution planning models and techniques

Optimisation modelling of integrated production–distribution (P–D) plans has raised significant interest among both researchers and practitioners over the past two decades. This paper provides the readers with a comprehensive review and critique on the current P–D planning and optimisation literature. We classify the published P–D planning models into seven categories based on their degree of complexity and hence capability in addressing real-life scenarios. Summary tables highlight the main characteristics of the selected models at each category. Next, the paper reclassifies and evaluates the proposed models based on the solution techniques used. Lastly, the unaddressed areas in the current literature are highlighted, important managerial implications are proposed and directions for future research in the area are suggested.     

The role of technological availability for the distributive impacts of climate change mitigation policy

The impacts of the availability of low-carbon technologies on the regional distribution of mitigation costs are analyzed in a global multi-regional integrated assessment model. Three effects on regional consumption losses are distinguished: domestic measures, trade of fossil energy carriers and trade of emission permits. Key results are: (i) GDP losses and a redirection of investments in the energy system towards capital-intensive technologies are major contributions to regional consumption losses. (ii) A devaluation of tradable fossil energy endowments contributes largely to the mitigation costs of fossil fuel exporters. (iii) In case of reduced availability of low-carbon technologies, the permit market volume and associated monetary redistributions increase. The results suggest that the availability of a broad portfolio of low-carbon technologies could facilitate negotiations on the permit allocation scheme in a global cap-and-trade system.     

Fabrication of nanoporous TiO2 by electrochemical anodization

The formation of self-organized porous titania is achieved by electrochemical anodization under a potentiostatic regime. Anodic titanium oxide (ATO) was fabricated by a three-step self-organized anodization of the Ti foil in an ethylene glycol electrolyte containing 0.38 wt% of NH₄F and 1.79 wt% of H₂O. Anodizing was carried out at the constant cell potential ranging from 30 to 70 V at the temperature of 20 °C. It was found that nanoporous TiO₂ arrays can be obtain only after a short duration of the third step (10 min). The influence of anodizing potential on the structural parameters of porous anodic titania including pore diameter, interpore distance, wall thickness, porosity and pore density was extensively studied. The linear dependencies between interpore distance, pore diameter and wall thickness upon the anodizing potential were found. The regularity of pore arrangement was monitored qualitatively by fast Fourier transforms (FFTs) of top-view FE-SEM images. It was found that the best arrangement of nanopores is observed at 40 V. This finding was confirmed by the analysis of pore circularity. The highest circularity of pores was observed once again at 40 V.     

Observation of Injured E. coli Population Resulting from the Application of High‐Pressure Throttling Treatments

This study used flow cytometry (FC), epifluorescent microscopy (EM), and conventional culture media (PC) to evaluate the potential for high‐pressure throttling (HPT) to produce injury in E. coli. E. coli cells suspended at a concentration of approximately 8 log (CFU/mL) in Butterfield's phosphate buffer and UHT skimmed milk, were treated with HPT at pressures ranging from 35 to 283 MPa. Cells were stained with SYTO 9 and propidium iodide (Live/Dead Baclight kit) to assess their membrane integrity. MacConkey and Tryptone Soy agars and a modification of the thin agar layer method were used to determine injured and non‐injured cells. PC results indicated a reduction in E. coli counts as pressure increased but no significant injured population was detected in either matrix. However, FC and EM observations indicated that the membrane integrity of a portion of the bacterial population was affected by HPT, producing different degrees of cell injury that could be sublethal. The percentage of this heterogeneous population increased with applied pressure. These results reassert the importance of understanding the potential of new processing treatments to produce sublethally‐injured bacteria, and developing appropriate detection techniques.     

Rheological and Ultrastructural Properties and Particle Size Distribution of Soymilk as Affected by Processing Methods

Soymilk was prepared from boiled and unboiled comminuted suspensions of dehulled soybean and water using pressurized homogenization (one pass and two pass). Particle size showed significant differences between soymilks homogenized by one pass and two pass. Apparent viscosities and total solid contents showed significant differences between boiled and unboiled treatments. Soymilks exhibited pseudoplastic and thixotropic behavior and Arrhenius model was fitted to express temperature dependence of apparent viscosity. Microscopic images showed hydrated, separated, uniformly distributed, and homogeneous particles in boiled two-pass soymilk as they were disrupted easily and it was selected as the best treatment for processing soymilk containing all of the soybean solids.     

Theoretical and Experimental Analysis of a Laser Textured Thrust Bearing

In this article, a laser partially textured thrust bearing is theoretically and experimentally analyzed. An adiabatic model is developed in order to theoretically investigate the performances of the bearing. The bearing sample is partially textured both in radial and circumferential direction using the laser texturing process. The performance of the bearing (fluid film thickness and friction torque) is evaluated on a specially adapted test rig and the experimental results are compared with the theoretical model. A good agreement is found between the theoretical model and the experimental data. Also a comparison between a laser textured bearing and a bearing textured using the photolithographic method is presented.     

Effect of hydrogen on room-temperature plasticity of B2 iron aluminides

Different sensitivities to hydrogen embrittlement for the disordered and ordered B2 FeAl alloys have been investigated. The plasticity of annealed alloys (before hydrogenating) has been found to decrease with increasing the long-range order parameter. An intrinsic weakness of FeAl phase grain boundaries revealed at a high degree of ordering. The results of bending tests on specimens annealed and cathodically charged with hydrogen have shown that the influence of hydrogen on the plasticity diminishes with the increase in the degree of FeAl phase ordering.     

Prevalence of Escherichia coli associated with a cabbage crop inadvertently irrigated with partially treated sewage wastewater

Preharvest contamination of field crops may have many sources, including feces, soil, and irrigation water. In March 2000, a sewage spill released unchlorinated tertiary-treated effluent into a creek used to irrigate commercial produce. A field of young cabbage transplants was irrigated with creek water as the contaminated water flowed past this land. Cabbage samples were taken from plots within this field, and Escherichia coli was isolated from the roots of these plants but not from the edible portion of the cabbage. No E. coli was isolated from water samples or from control samples taken from a nearby cabbage field watered with chlorinated municipal water. The cabbage field under study had not been fertilized with manure for at least 2 years prior to the contamination incident. Six different E. coli serotypes were identified, although none of them proved to be pathogenic. These serotypes were separated into five groups by a RiboPrinter; the resulting groups correlated well with the serotypes and the locations in the field from which these strains were isolated. We previously found that certain nonpathogenic E. coli strains displayed lower levels of adherence to lettuce seedling roots in a hydroponic adherence assay. The E. coli field strains displayed variable patterns of adherence to lettuce seedlings: strain MW421 showed significantly lower root and shoot adherence levels than did the other field strains, while strains MW423 and MW425 showed significantly higher root and shoot adherence levels. These data suggest that water quality is of paramount importance for the food safety of growing crops.