换热管的程序自动计数方法

介绍了一种用Autolisp语言编制的程序、对换热器管束数目进行准确计数的方法。     

CDMA通信系统的MATLAB仿真

在简要介绍MATLAB语言的基础上，对使用MATLAB语方仿真的CDMA通信系统进行描述。     

大长径比自旋弹箭横向自振特性的有限元计算方法与结果分析

本文研究大长径比自旋弹箭在飞行时横向振动的自振特性。本文将转子动力学应用于弹道学 ,采用有限元法 ,建立自旋弹箭横向振动自振特性方程。同时给出了计算方法。利用该方程和该方法 ,开发了相应的计算程序。通过数值计算 ,可给出细长旋转弹箭飞行时的进动转速和临界转速 ,以及相应的位移和角度振型。利用该程序 ,进行了实例计算和分析。     

WLAN的安全性设计

本文分析了WLAN中存在的安全问题，并提出了相应的解决策略，对于WLAN的设计具有较高的参考价值。     

An experimental study of carrier heating on channel noise in deep-submicrometer NMOSFETs via body bias

In this paper, RF noise in 0.18-mum NMOSFETs concerning the contribution of carrier heating and hot carrier effect is characterized and analyzed in detail via a novel approach that modulates the channel carrier heating and number of hot carriers using body bias. We confirm qualitatively a negligible role of hot carrier effect on the channel noise in deep-submicrometer MOSFETs. For a device under reverse body bias (V_b), even though the increase in hot carrier population is clearly characterized by dc measurements, the device high-frequency noise is found to be irrelevant to the increase in the channel hot carriers. Experimental results show that the high-frequency noise is slightly reduced with the increase in |V_b|, and can be qualitatively explained by secondary effects such as the suppression of nonequilibrium channel noise and substrate induced noise. The reduction of NF_min and R_n with the increase in |V_b| may provide a possible methodology to finely adjust the device high-frequency noise performance for circuit design     

催化裂化汽油选择性加氢脱硫催化剂RSDS-1的开发

介绍了用于催化裂化汽油选择性加氢脱硫催化剂RSDS-1的研究开发，考察了载体、活性组元、金属原子比以及助剂对催化剂选择性的影响。研究结果表明，催化裂化汽油中烯烃的加氢饱和受扩散限制；Co—Mo组合对烯烃饱和的能力相对较弱；较高的Co／Mo原子比有利于提高催化剂选择性；助剂的加入对催化剂选择性有明显的影响；RSDS—1催化剂用于催化裂化汽油选择性脱硫，对不同原料油适应性好，脱硫率可达80％，RON损失小于2个单位，且可长周期稳定运转。     

Influence of CYP3A5 polymorphism on tacrolimus blood concentrations in renal transplant patients

Objective Tacrolimus is an immunosuppressive drug with narrow therapeutic range and wide interindividual variation in its pharmacokinetics. Tacrolimus is a substrate of cytochrome P450(CYP)3A5. The aim of this study was to evaluate whether the A6986G polymorphism is associated with tacrolimus concentration /dose ratio. Methods Fifty-two Chinese renal transplant patients were enrolled in this study. Their body weight, dosage and concentration of tacrolimus were observed. CYP3A5 genotype was determined by polymerase chain reaction followed by restriction fragment length polymorphism analysis. Results A significant association was found between tacrolimus levels per dose/kg/d and CYP3A5 gene A6986G polymorphism (P<0.001). The CYP3A5 * 3 * 3 patients have a significantly higher tacrolimus level/dose than CYP3A5 * 1 * 1 and CYP3A5 * 1 * 3. Conclusions CYP3A5 gene A6986G polymorphism is associated with tacrolimus pharmacokinetics and dose requirements. Pharmacogenetic methods could be employed prospectively to help the dose selection and to individualize immunosuppressive therapy according to the result. Foundation item: Project (03GZ3072) supported by the Science and Technology Department of Hunan Province; project (2004035206) supported by the China Postdoctoral Foundation and project (30300383) supported by the National Natural Sciences Foundation of China     

热平衡流量计研究与应用

依据热平衡方法测流量原理研制的热平衡流量计没有任何可动部件，可靠性大大加强，可以代替常用的浮子流量计和涡轮流量计。该仪器的应用为油水井及注聚合物井的流量测试提供了更为有效的手段和方法。     

On structural and high temperature electrochemical properties of ZrO2 thin film coating on Zr metal produced by carbonate melt

Melt of NaCO₃ can favor oxidation of Zr to form ZrO₂ thin film on Zr surface, which is used to make Zr/ZrO₂ oxidation/reduction electrode of pH sensor for testing elevated temperature aqueous solutions. Using SEM, EPMA, XPS, EXAFS and HRTEM, we found that ZrO₂ film is tightness and solid with 20 μm thickness composed by nanometer-sized monoclinic crystals. Zr/ZrO₂ interface is characterized of zoning structure according to topography and chemical composition in five zones: oxygen-rich ZrO₂, ZrO₂, oxygen-rich Zr metal, oxygen-bearing Zr and Zr from outmost to center. Melt oxidation process of Zr involved oxidation time, air and temperature. The air is important effect on structural and electrochemical properties of ZrO₂ thin film for making elevate temperature electrochemical sensor. If oxygen air largely presented in carbonate melting process, ZrO₂ thin film is not tightness and not for oxidation/reduction electrode.