Polysaccharide‐based membranes loaded with erythromycin for application as wound dressings

In this study, the antibiotic erythromycin (Ery) was incorporated into chitosan (Ch)–alginate (A) and Ch–xanthan (X) membranes with the aim of using them as bioactive wound dressings. Drug incorporation was performed by direct addition (DA) to the polysaccharide mixture and by membrane impregnation in solution (IS). A higher incorporation efficiency was obtained for DA, but higher amounts of drug were loaded into membranes by the IS method (maxima ≈ 2.1 and 0.7 g/g for Ch–X and Ch–A, respectively) because the initial concentration of drug could be higher than that in the DA method. Ery release in phosphate‐buffered saline was slow, reaching about 12 and 32 mg of drug/g of membrane in 60 h for Ch–X and 4 and 16 mg/g for Ch–A by the DA and IS methods, respectively. With formulations prepared with IS, the required therapeutic dosage was reached within 60 h, whereas for those incorporating the drug by DA, prolonged use would be required. Both membrane types behaved as drug reservoirs, providing continuous antibiotic release to the wound site. Formulations with higher drug contents showed effective antibacterial activity against two species of bacteria commonly found in skin lesions, Staphylococcus aureus and Pseudomonas aeruginosa, and were thus potentially capable of protecting the wound site from bacterial attack. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43428.     

Binding of Sulpiride to Seric Albumins

The aim of this work was to study the interaction of sulpiride with human serum albumin (HSA) and bovine serum albumin (BSA) through the fluorescence quenching technique. As sulpiride molecules emit fluorescence, we have developed a simple mathematical model to discriminate the quencher fluorescence from the albumin fluorescence in the solution where they interact. Sulpiride is an antipsychotic used in the treatment of several psychiatric disorders. We selectively excited the fluorescence of tryptophan residues with 290 nm wavelength and observed the quenching by titrating HSA and BSA solutions with sulpiride. Stern-Volmer graphs were plotted and quenching constants were estimated. Results showed that sulpiride form complexes with both albumins. Estimated association constants for the interaction sulpiride–HSA were 2.20 (±0.08) × 10⁴ M⁻¹, at 37 °C, and 5.46 (±0.20) × 10⁴ M⁻¹, at 25 °C. Those for the interaction sulpiride-BSA are 0.44 (±0.01) × 10⁴ M⁻¹, at 37 °C and 2.17 (±0.04) × 10⁴ M⁻¹, at 25 °C. The quenching intensity of BSA, which contains two tryptophan residues in the peptide chain, was found to be higher than that of HSA, what suggests that the primary binding site for sulpiride in albumin should be located next to the sub domain IB of the protein structure.     

Polymeric Nanoparticle-Based Photodynamic Therapy for Chronic Periodontitis in Vivo

Antimicrobial photodynamic therapy (aPDT) is increasingly being explored for treatment of periodontitis. Here, we investigated the effect of aPDT on human dental plaque bacteria in suspensions and biofilms in vitro using methylene blue (MB)-loaded poly(lactic-co-glycolic) (PLGA) nanoparticles (MB-NP) and red light at 660 nm. The effect of MB-NP-based aPDT was also evaluated in a clinical pilot study with 10 adult human subjects with chronic periodontitis. Dental plaque samples from human subjects were exposed to aPDT—in planktonic and biofilm phases—with MB or MB-NP (25 µg/mL) at 20 J/cm² in vitro. Patients were treated either with ultrasonic scaling and scaling and root planing (US + SRP) or ultrasonic scaling + SRP + aPDT with MB-NP (25 µg/mL and 20 J/cm²) in a split-mouth design. In biofilms, MB-NP eliminated approximately 25% more bacteria than free MB. The clinical study demonstrated the safety of aPDT. Both groups showed similar improvements of clinical parameters one month following treatments. However, at three months ultrasonic SRP + aPDT showed a greater effect (28.82%) on gingival bleeding index (GBI) compared to ultrasonic SRP. The utilization of PLGA nanoparticles encapsulated with MB may be a promising adjunct in antimicrobial periodontal treatment.     

Co-Expression and Co-Localization of Cartilage Glycoproteins CHI3L1 and Lubricin in Osteoarthritic Cartilage: Morphological,Immunohistochemical and Gene Expression Profiles

Osteoarthritis is the most common human arthritis characterized by degeneration of articular cartilage. Several studies reported that levels of human cartilage glycoprotein chitinase 3-like-1 (CHI3L1) are known as a potential marker for the activation of chondrocytes and the progression of Osteoarthritis (OA), whereas lubricin appears to be chondroprotective. The aim of this study was to investigate the co-expression and co-localization of CHI3L1 and lubricin in normal and osteoarthritic rat articular cartilage to correlate their modified expression to a specific grade of OA. Samples of normal and osteoarthritic rat articular cartilage were analyzed by the Kellgren–Lawrence OA severity scores, the Kraus’ modified Mankin score and the Histopathology Osteoarthritis Research Society International (OARSI) system for histomorphometric evaluations, and through CHI3L1 and lubricin gene expression, immunohistochemistry and double immuno-staining analysis. The immunoexpression and the mRNA levels of lubricin increased in normal cartilage and decreased in OA cartilage (normal vs. OA, p < 0.01). By contrast, the immunoexpression and the mRNA levels of CHI3L1 increased in OA cartilage and decreased in normal cartilage (normal vs. OA, p < 0.01). Our findings are consistent with reports suggesting that these two glycoproteins are functionally associated with the development of OA and in particular with grade 2/3 of OA, suggesting that in the future they could be helpful to stage the severity and progression of the disease.     

The effect of monoethylene glycol on the stability of water-in-oil emulsions

It is important from both a strategic and economic standpoint to study the mechanism of formation of water/oil emulsions, to predict their increase of viscosity with respect to that of the crude oil, and to obtain information about the stability vs separation of these substances (since their presence can impair oil processing and distribution). The objective of this work was to ascertain the influence of monoethylene glycol (MEG) on these parameters and its action mechanism. The addition of MEG in different proportions in the oil emulsions significantly changed the flow curve of the emulsion, passing from a quasi-Newtonian one to a shear thinning behaviour. Besides this, when MEG was present at low concentrations, the demulsification process was slow and an increase in concentration made the emulsions more stable than samples containing the same aqueous phase proportion. Under the conditions studied, the addition of MEG did not reduce the quantity of the aqueous phase separated compared to the emulsions free of MEG, but significantly delayed the demulsification process. Rheology provided important information regarding the phase separation process of the aqueous phase in oil phase emulsions, and dynamic testing suggested that the most relevant effect of the addition of MEG is an increase of the emulsion elasticity that can be correlated with the increase in the emulsion stability observed by bottle test and Turbiscan.     

Microstructure and mechanical properties of ternary mortars with brick powder,glass powder,slag, fly ash,and limestone

The objective of this research is to study the effects produced by ternary binders which combine the addition of waste brick powder with fly ash, limestone, ground granulated blast furnace slag or waste glass powder in the microstructure and mechanical properties of mortars. In these ternary binders, the ordinary Portland cement was partially replaced by 10% of waste brick powder and 10% of another of the abovementioned additions. Mortars prepared with ordinary Portland cement without additions were also prepared. The microstructure was characterized with mercury intrusion porosimetry, electrical resistivity, and thermogravimetric analyses. Ultrasonic pulse velocity, compressive and flexural strengths were also determined. Mortars made using ternary binders with two active additions showed higher pore refinement and higher electrical resistivity at 250 days. Furthermore, their compressive strength and ultrasonic pulse velocity were relatively similar or even higher than that noted for reference specimens.     

基于SR7265硬件的虚拟锁相放大器、频谱仪、阻抗计和半导体参数分析仪

锁相放大器是用来测量微弱信号的专用仪器.即使噪音上千倍于被测信号,通过锁相放大器,也能得到精确结果.随着数字信号处理技术在仪器中的应用,可编程仪器变得越来越灵活.结合虚拟仪器的技术,论文通过对SR7265的硬件重新编程,在同一个硬件上实现了虚拟锁相放大器、虚拟频谱仪、虚拟阻抗计和虚拟半导体参数分析仪等等功能.本虚拟仪器采用了4层的逻辑结构.同样的功能也在一个FPGA板上成功地部署.     

Self‐welding 1‐butene/ethylene copolymers from metallocene catalysts: Structure,morphology, and mechanical properties

Samples of random copolymers consisting of 1‐butene modified with a low ethylene content (4, 5, 8% by weight) produced with metallocene catalysts were studied to elucidate the polymorphic behavior of this new class of materials and to characterize them from a structural, morphological, and mechanical point of view. The samples cooled down from the melt are in amorphous phase and crystallize in a mixture of form I and I′ or in pure form I′ with aging time, according to the C2 content. Infrared and nuclear magnetic resonance spectroscopy, X‐ray diffraction and microscopic techniques were used to follow the changes of the material with aging time and to correlate the structural and morphological behavior with the peculiar mechanical properties that differentiate the samples with increasing C2 content. The presence, in the aged samples with higher C2 content, of the pure form I′ induces the peculiar ability to self‐welding and these copolymers combine high flexibility with good elasticity and ductility and can be processed directly or used as modifying agents in polymers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40119.