SCRATCH RESISTANT POLYIMIDE COATINGS FOR ALUMINOSILICATE GLASS SURFACES

Several polyimide resins were tested as possible scratch resistant coatings for aluminosilicate glass centrifuge tubes. Tubes with siloxane pretreatments provided the best adhesion between the polyimide and glass surface. Resins synthesized with an alkoxysilane group incorporated into the polyimide chain also showed improved adhesion, but the results were not as significant as when the pretreatment was used. Elastic recovery and effective Young's modulus of the polyimide coatings were calculated from nano-scratching. The results indicate that polyimides with a lower modulus, and higher elastic recovery, protected the glass surface best, exhibiting compression of the coating layer. An example was poly-4-4'-oxydiphenylene pyromellitimide (PMDA-ODA), whereas the coatings with a high effective Young's modulus and low elastic recovery ruptured. An example of a failed coating was poly-4,4'-carbonyldiphenylene 3,3',4,4'-biphenylenetetracarboximide (BPDA-DABP) which had low amount of elastic recovery, high effective Young's modulus and a large amount of flaking during macroscratch testing.     

Analysis of the propagation of leaky magnetostatic modes in normally magnetized microstrip and slot lines

The propagation of leaky forward magnetostatic (MS) volume waves along ferrite-loaded microstrip and slot lines is analyzed. This phenomenon is studied by means of a numerical approach based on the residue calculus technique because of its good numerical convergence and stability. The proposed method allows for a quick and accurate computation of the phase and attenuation constants of the leaky MS modes. A comparative analysis between both microstrip lines and slot lines is carried out, and some new physical effects, such as MS resonances in the radiation loss, are reported. The advantages of the proposed method of analysis over other numerical methods, such as Galerkin's or moment methods, are also discussed.     

Ti/Al Interaction and Austenite Grain Control in Crankshaft Manufacturing with 38MnSiVS5 Steel

38MnSiVS5 steel is similar to 38MnVS6 steel (EN), the difference being the addition of a small Ti content. Typical Ti and Al contents in the chemical composition of 38MnSiVS5 steel are Ti=0.020 and Al=0.035 mass%. Both elements combine easily with nitrogen, especially Ti, and it has been observed that relatively high Al levels are harmful for austenite grain size control at reheating temperatures. In this work 38MnSiVS5 steel is used to manufacture a large number of castings, varying only the Ti and Al contents and obtaining ingots with a different Ti/Al ratio in each case. The results show that abnormal growth of the austenitic grain occurs irrespective of the Ti and Al contents, due fundamentally to the partial dissolution and coarsening of TiN precipitates. However, the steels with high Al contents present worse behaviour due to the formation of a second type of precipitates, namely AIN, which quickly dissolve between 1000 and 1100°C, causing a drastic decline in local pinning forces that gives rise to more pronounced abnormal growth of the affected grains.     

Mycological survey for potential aflatoxin and ochratoxin producers and their toxicological properties in harvested Brazilian black pepper.

A mycological survey was carried out on 115 samples of whole dried black pepper seeds, from two main production regions of Brazil (Pará and Espírito Santo). A high incidence of contamination was verified in both regions when 99.1% of the samples showed filamentous fungi contamination. A total of 497 species of nine different genera were isolated (Aspergillus, Eurotium, Rhizopus, Penicillium, Curvularia, Cladosporium, Absidia, Emericella and Paecilomyces). The genus Aspergillus was the predominant (53.5%) followed by species from the Eurotium genus (24.5%). Eurotium chevalieri (16.4%) was the most predominant species followed by A. flavus (14.6%) present on 55 samples of black pepper (47.8%) analysed. Twenty-five samples (21.7%) were contaminated with aflatoxigenic strains of A. flavus and A. parasiticus. In relation to the types of aflatoxins produced by mycotoxigenic strains, it was observed that 25 strains (44.6%) of 56 isolated of A. flavus produced aflatoxins. From 12 samples, A. ochraceus species were isolated in low frequency (3.5%). Two strains of A. ochraceus from 16 isolated were producers of ochratoxin A. With respect to the aflatoxins and ochratoxin A natural contamination, none of the samples presented detectable levels of these mycotoxins using thin-layer chromatographic analysis.     

Genotoxic effect of Physalis angulata L. (Solanaceae) extract on human lymphocytes treated in vitro

Physalis angulata L (Solanaceae) is a medicinal plant from North of Brazil, whose different extracts and infusions are commonly used in the popular medicine for the treatment of malaria, asthma, hepatitis, dermatitis and rheumatism. However, the genotoxic effects of P. angulata on human cells is not well known. The main purpose of the present study was to evaluate the in vitro genotoxic effects of aqueous extract of P. angulata using the comet assay and the micronucleus assay in human lymphocytes provided from 6 healthy donors. Treatments with P. angulata extracts were performed in vitro in order to access the extent of DNA damage. The comet assay has shown that treatments with P. angulata at 0.5, 1.0, 2.0, 3.0 and 6.0 microg/mL in culture medium were genotoxic. Lymphocytes treated with P. angulata at the concentrations of 3.0 and 6.0 microg/mL in culture medium showed a statistically significant increase in the frequency of micronucleus (p<0.05), however, the cytokinesis blocked proliferation index (CBPI) was not decreased after P. angulata treatment. In conclusion, the present work demonstrated the genotoxic effects of P. angulata extract on human lymphocytes in vitro.     

Kinetic modelling of textural changes in ready-to-eat breakfast cereals during soaking in semi-skimmed milk

Summary Ready‐to‐eat breakfast cereals immersed in milk undergo undesirable changes in texture because of sudden moisture uptake. The textural changes are ascribable to a plasticizing effect of water, which modifies the mechanical strength of products by softening the starch/protein matrix. In this work, some textural parameters of different cereal flakes were derived from the force–displacement curves monitored during 300 s of immersion in milk. Hardness loss, deformability increment and changes in the force–displacement curve profile were calculated and plotted against soaking time. The application of a sugar coating process to a model cereal flake increased the initial product hardness and improved the preservation of the textural parameters during immersion. The Peleg model closely fitted the experimental data, with regression coefficients from 0.967 to 0.999.     

EGF/EGF-R system and benign breast disease during and following the treatment of gynaecological pathologies with an analogue of LH-RH

Clinical and pathological changes of the mammary gland have been studied in 64 women affected by symptomatic Benign Breast Disease (BBD) coexisting with endometriosis or uterine leiomyomata. These patients were rendered hypoestrogenic by subcutaneous administration of the LH-RH analogue Goserelin depot [D-ser (tBu)6 Aza-Gly10-GnRH (ICI118630)] performed every 28 days, for six months. They were evaluated clinically and ultrasonographically before and after treatment to find possible changes of BBD as well as of endometriosis or uterine leiomyomata. Mammary biopsies were performed before and after treatment in all the patients to study the changes of EGF-R expression. Results showed that clinical improvement is accompanied with a reduction of EGF-R expression.     

Effect of polyethylene on osteocalcin, alkaline phosphatase and procollagen secretion by human osteoblastic cells

BACKGROUND AND STUDY AIMS: Anastomotic leakage is a severe complication in gastric surgery and it is associated with a high rate of mortality. Conservative treatment sometimes is not sufficient to stem the leakages and, even when it is sufficient, it takes a long time. The present study describes the first experience in the treatment of anastomotic leakages with endoscopic clipping. PATIENTS AND METHODS: From May 1995 to December 1996, seven patients with postoperative anastomotic leakages after gastric surgery were prospectively treated in our Endoscopy Service. Metallic endoclips (MD 850, Olympus Corp., Tokyo, Japan) with prongs 12 mm long and 6 mm wide were applied, controlling the closure of the leakage by endoscopy, using radiographs to confirm the closure 24 hours later. RESULTS: Complete closure of the leakage was obtained in all seven cases. A single session of endoscopic clipping was needed for five patients while two other required, respectively, two and three sessions. The median time of leakage closure after endoscopic clipping was 2.3 days (range 1-5 days). The clips spontaneously dislodged within 1 month in five patients and within the second month in the other two patients. CONCLUSION: Endoscopic treatment of anastomotic leakages by metallic clips represents a safe and easily repeated method and, compared to conservative treatment, it seems to offer several time and cost advantages. Further studies involving a larger number of patients are needed to verify this finding.     

Analysis of the effect of polypyrrole synthesis conditions on its capacity to reduce hexavalent chromium

This paper reports the capacity of polypyrrole to reduce toxic hexavalent chromium (Cr(VI)). The influence of using different electrolytes during the polymer's synthesis has been studied. To improve the reduction of Cr(VI), the parameters considered were the polypyrrole morphology and the amount of conducting polymer. Polypyrrole obtained by cyclic voltammetry at a low sweep rate using KBr as supporting electrolyte showed better performance for Cr(VI) reduction compared to coatings obtained by constant potential or cyclic voltammetry at high sweep rates.     

Establishment of human parotid pleomorphic adenoma cells in culture: morphological and biochemical characterization

This study reports the establishment of alpha-amylase-producing human parotid pleomorphic adenoma cell lines (2HP and 2HP1) which have been maintained in culture for over 1 yr. The procedures required preparation of cellular clumps from tumor tissue and plating them on plasma clot or precoated dishes. During the initial phase of growth they required modified MCDB-153 medium without serum. When cells showed signs of degeneration they were changed to MCDB-153 medium containing first 2% and then 10% heat inactivated fetal bovine serum. Although cells grew well in MCDB-153 containing 10% serum, the epithelial cell morphology was not distinct. Therefore, the growth and morphology of cells grown in MCDB-10% serum were compared with those in RPMI growth medium containing 10% fetal bovine serum and F12 containing 10% agammaglobulin newborn bovine serum. Although the growth of cells was a little slower in F12 medium than those in MCDB and RPMI, the epithelial cell morphology was maintained better than in other growth media. The cells of 2HP and 2HP1 produce low levels of alpha-amylase and relatively high levels of alpha-amylase mRNAs of 1176 and 702 bp and contain neurofilament-160, a neuronal-specific marker. The cells of 2HP1 are tumorigenic when tested in athymic mice, but the cells of 2HP are not. The establishment of amylase-producing human parotid adenoma cell lines of different characteristics in culture provides a new opportunity to study the mechanisms of differentiation and transformation, and regulation of alpha-amylase in these cells.