Robust Microcapsules with Controlled Permeability from Silk Fibroin Reinforced with Graphene Oxide

Robust and stable microcapsules are assembled from poly‐amino acid‐modified silk fibroin reinforced with graphene oxide flakes using layer‐by‐layer (LbL) assembly, based on biocompatible natural protein and carbon nanosheets. The composite microcapsules are extremely stable in acidic (pH 2.0) and basic (pH 11.5) conditions, accompanied with pH‐triggered permeability, which facilitates the controllable encapsulation and release of macromolecules. Furthermore, the graphene oxide incorporated into ultrathin LbL shells induces greatly reinforced mechanical properties, with an elastic modulus which is two orders of magnitude higher than the typical values of original silk LbL shells and shows a significant, three‐fold reduction in pore size. Such strong nanocomposite microcapsules can provide solid protection of encapsulated cargo under harsh conditions, indicating a promising candidate with controllable loading/unloading for drug delivery, reinforcement, and bioengineering applications.     

Biochemical and sensory characteristics of traditional fermented sausages of Vallo di Diano (Southern Italy) as affected by the use of starter cultures

In this study, two strains of Staphylococcus xylosus isolated from traditional fermented sausages of Vallo di Diano (Southern Italy) were used in combination with an acidifying strain of Lactobacillus curvatus as starter culture for the production of fermented sausages. Two starter formulation were developed combining the proteolytic but not lipolytic (prt(+), lip(-)) S. xylosus CVS11 with the L. curvatus AVL3 (starter S1) and the S. xylosus FVS21 (prt(-), lip(+)) with the same strain of L. curvatus (starter S2). Proteolysis and lipolysis were observed during ripening by the increase in total free amino acids (FAA) and free fatty acids (FFA), respectively. Such activities were observed in both started and non started sausages (control). Moreover, the proteolytic and lipolytic activities were detected in products started by both formulations irrespective of the presence of such activities in the strains used. Therefore, it was not possible to conclude whether the effect of proteolysis and lipolysis during ripening of the started fermented sausages was due to the activity of the starter cultures or to the action of meat endogenous enzymes.     

声波测井网络理论Ⅰ:声源信号的产生方法和数值模拟

利用薄球壳压电换能器的等效电路可以解析地确定在薄球壳压电换能器被电激励信号激发过程中， 周围耦合介质对它的作用力和它的瞬态响应，给出了用驱动电压信号激励换能器使其辐射出马鞍组特殊测井需要的声源信号，由于薄球壳换能器在所有的方向上均匀地向外辐射声波信号，因此在声波测井的正演研究和数值模拟中，可以把它等效为一个点源。     

Dietary intakes in infertile women a pilot study

Background  

The reproductive axis is closely linked to nutritional status. The purpose of this study was to compare the nutritional status in two groups of young infertile women, without clinically overt eating disorders: hypothalamic amenorrhea (HA) and polycystic ovary syndrome (PCOS).     

Numerical simulation of coherent transport in quantum wires for quantum computing

A solid-state implementation of a universal set of gates for quantum computation is proposed and analysed using a time-dependent 2D Schrödinger solver. The qubit is defined as the state of an electron propagating along a couple of quantum wires. The wires are suitably coupled through a potential barrier with variable height and/or width. It is shown how a proper design of the system allows the implementation of any one-qubit transformation. The two-qubit gate is realized through a Coulomb coupler able to entangle the quantum states of two electrons running in two wires of two different qubits. The simulated devices are GaAs—AlGaAs heterostructures that should be on the borderline of present semiconductor technology. An estimate of decoherence effects due to phonon scattering is also presented.     

Congenital diarrheal disorders: an updated diagnostic approach

Congenital diarrheal disorders (CDDs) are a group of inherited enteropathies with a typical onset early in the life. Infants with these disorders have frequently chronic diarrhea of sufficient severity to require parenteral nutrition. For most CDDs the disease-gene is known and molecular analysis may contribute to an unequivocal diagnosis. We review CDDs on the basis of the genetic defect, focusing on the significant contribution of molecular analysis in the complex, multistep diagnostic work-up.     

A combination of modified atmosphere and antimicrobial packaging to extend the shelf-life of beefsteaks stored at chill temperature

An antimicrobial polyethylene (PE) film was obtained by coating a nisin-based antimicrobial solution. PE sheets were coated on both sides and were used for the packaging of beefsteaks to be stored in air or modified atmosphere packaging (MAP, 60% O(2)-40% CO(2)). Microbial populations, species diversity, headspace volatile organic compounds, colour and sensory properties were monitored after 0, 1, 7 and 12days of storage at 4°C. The viable counts showed that there was an effect of MAP and antimicrobial film on the development of all the spoilage associated microbial populations. Carnobacterium spp., Brochothrix thermosphacta, Pseudomonas fragi and Rhanella aquatilis were found in most of the samples. C. maltaromaticum was identified in MRS bulk cells from samples stored in air as well as MAP. Quantitative data of headspace-SPME-GC/MS analysis showed that during storage the production of volatile organic compounds (VOCs) was affected by the use of the treated film and the MAP storage. Compounds such as phenylethylalcohol, nonanal, decanal and ethylbutanoate were produced only from 7 to 12day of storage and only in the samples stored in air. In agreement with the microbiological and VOCs data, the meat stored in active packaging scored the best rankings in the sensory evaluation. Principal component analysis of microbial, sensory and instrumental data showed that beefsteaks stored with the combination of MAP and active packaging for 12days at 4°C differed from the other samples that were more associated to high microbial loads, VOCs concentration and meat off odour perception. In conclusion, the antimicrobial sheets in combination with MAP storage at 4°C were effective for the storage of beefsteaks by retarding the growth of spoilage bacteria, determining lower concentration of VOCs and keeping acceptable levels of colour and other sensory parameters for more than 10days.     

Hypoxia Enhances the Expression of RNASET2 in Human Monocyte-Derived Dendritic Cells: Role of PI3K/AKT Pathway

Hypoxia is a key component of the tumor microenvironment (TME) and promotes not only tumor growth and metastasis, but also negatively affects infiltrating immune cells by impairing host immunity. Dendritic cells (DCs) are the most potent antigen-presenting cells and their biology is weakened in the TME in many ways, including the modulation of their viability. RNASET2 belongs to the T2 family of extracellular ribonucleases and, besides its nuclease activity, it exerts many additional functions. Indeed, RNASET2 is involved in several human pathologies, including cancer, and it is functionally relevant in the TME. RNASET2 functions are not restricted to cancer cells and its expression could be relevant also in other cell types which are important players in the TME, including DCs. Therefore, this study aimed to unravel the effect of hypoxia (2% O₂) on the expression of RNASET2 in DCs. Here, we showed that hypoxia enhanced the expression and secretion of RNASET2 in human monocyte-derived DCs. This paralleled the HIF-1α accumulation and HIF-dependent and -independent signaling, which are associated with DCs’ survival/autophagy/apoptosis. RNASET2 expression, under hypoxia, was regulated by the PI3K/AKT pathway and was almost completely abolished by TLR4 ligand, LPS. Taken together, these results highlight how hypoxia- dependent and -independent pathways shape RNASET2 expression in DCs, with new perspectives on its implication for TME and, therefore, in anti-tumor immunity.     

Morphology and electrochemical properties of Pd-based catalysts deposited by different thin-film techniques

Pd/C-based electrodes for fuel cells applications were prepared by galvanostatic electrodeposition and DC sputtering of palladium on gas diffusion layers. Different sets of samples were realized by varying the Pd load, for each technique. The surface morphology of the deposits was investigated by scanning electron microscopy. Cyclic voltammetry in acidic solution was applied to study the catalytic behavior of the freshly deposited samples and to follow their evolution with increasing cycle numbers. The results showed that, depending on the sputtering or electrochemical technique and metal load, samples grew with different morphologies and showed different electrochemical behaviors, with electroactive surface values ranging between a few tens to some hundreds m²/g. Sputtered films were characterized by a microstructure made of sub-micrometric cauliflower-shaped clusters and showed the highest electroactive surface values after prolonged voltammetric scanning. Pd hydride formation with both α and β phases and high hydrogen absorption capability were observed in some of the electrodeposited samples, in association to flower-like micrometric-size clustered structure and hydrogen codeposition during the electrochemical growth process.     

Manufacturing of 3D-Printed Microfluidic Devices for the Synthesis of Drug-Loaded Liposomal Formulations

Microfluidic technique has emerged as a promising tool for the production of stable and monodispersed nanoparticles (NPs). In particular, this work focuses on liposome production by microfluidics and on factors involved in determining liposome characteristics. Traditional fabrication techniques for microfluidic devices suffer from several disadvantages, such as multistep processing and expensive facilities. Three-dimensional printing (3DP) has been revolutionary for microfluidic device production, boasting facile and low-cost fabrication. In this study, microfluidic devices with innovative micromixing patterns were developed using fused deposition modelling (FDM) and liquid crystal display (LCD) printers. To date, this work is the first to study liposome production using LCD-printed microfluidic devices. The current study deals with 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) liposomes with cholesterol (2:1) prepared using commercial and 3D-printed microfluidic devices. We evaluated the effect of microfluidic parameters, chip manufacturing, material, and channel design on liposomal formulation by analysing the size, PDI, and ζ-potential. Curcumin exhibits potent anticancer activity and it has been reported that curcumin-loaded liposomes formulated by microfluidics show enhanced encapsulation efficiency when compared with other reported systems. In this work, curcumal liposomes were produced using the developed microfluidic devices and particle sizing, ζ-potential, encapsulation efficiency, and in vitro release studies were performed at 37 °C.