Incorporating supplier selection and order allocation into the vehicle routing and multi-cross-dock scheduling problem

In the vehicle routing problem with cross-docking (VRPCD), it is assumed that the selected suppliers and the quantity of the products purchased from each supplier are known. This paper presents an MILP model which incorporates supplier selection and order allocation into the VRPCD in a multi-cross-dock system minimising the total costs, including purchasing, transportation, cross-docking, inventory and early/tardy delivery penalty costs. The sensitivity of the model on the key parameters of the objective function is analysed and the supply decisions are evaluated when the coefficients of the distribution cost are changed. A two-stage solution algorithm (TSSA) is proposed and the results of the TSSA for small-sized instances are compared with the exact solutions. Finally, a large-sized real case of an urban freight transport is solved using the TSSA.     

Investigation of the effect of carbonaceous supports on the activity and stability of supported palladium catalysts for methanol electro-oxidation reaction

In this study, nitrogen doped graphene (NG) and multi-walled carbon nanotubes (MWCNT) were used as supporting materials for palladium active phase to investigate their performance in direct methanol fuel cells (DMFCs). The facile and low temperature solvothermal method was used for the synthesis of NG. Palladium nanoparticles were deposited on the surface of NG and MWCNT by a modified polyol reduction method. The morphologies and microstructures of the prepared catalysts were characterized by scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and X-ray diffraction. Also, cyclic voltammetry, chronoamperometry, and electrochemical impedance spectroscopy were carried out to evaluate the electrocatalytic activity and the durability of the obtained catalysts towards methanol oxidation reaction. Pd/NG catalyst had a better activity and durability of methanol electrocatalytic oxidation rather than Pd/MWCNT catalyst, which is related to good dispersion of Pd nanoparticles on the surface of nitrogen doped graphene and the physicochemical characteristics of NG.     

Investigation on the Effect of Pre-heating with Butane Gas Torch in Formability of High Tension Steel (HTS) by Using Taguchi Experimental Method in Roll Forming Process

This study was carried out to evaluate a new roll forming process involving pre-heating using a gas torch. The temperature distribution for the formed sheet was observed using a 3D-IR graph generated from a thermal imaging camera. The appropriate distance between the formed sheet and the butane gas torch was also determined based on the results of the flame characteristics. The thermal effects of the formed sheet were confirmed by the temperature distribution. Spring-back analysis was applied to the Nominal the Best characteristic of Taguchi’s experimental method. In spring-back analysis, the forming speed is an influential variable. Bow analysis was applied to the Smaller the best characteristic of Taguchi’s experimental method. Lastly, at room temperature, the roll forming process was performed with pre-heating and formability was analyzed with respect to spring-back, bow and variance of bending angle (buckling). Spring-back, bow and buckling with the roll forming process involving pre-heating got improved by 0.97°, 0.17 mm and 0.20, respectively, compared to the same processes at room temperature. Forming speed appeared to have the most influence on the formability and pre-heating was found to improve the formability in the roll forming process.     

Modeling buffer utilization in cell-based networks

Variable bit rate traffic is characteristically bursty and the arrivals are highly correlated. New network technology carries such traffic in cell-based networks where the service is a discrete time, deterministic process with the service rate determined by bandwidth negotiated by the user. Managing such networks is hard, and predicting cell loss at a station with limited buffer capacity K is essential to enable the user to negotiate his quality of service requirements. We present an analysis to determine the queue length distribution and the loss probability in such circumstances. For our analysis, we use an m-phase Markov Modulated Bernoulli Process with binomial distributed batch arrivals and deterministic service and limited capacity K, i.e. a MMBP^[X]_(m)/D/1 − K queuing system. We show that the system can be analyzed using the so-called unfinished work approach. The validity of our evaluation technique is illustrated by comparing our analytical results against those obtained from an event-driven siimulation of the same system.     

Relative primary adhesion of Pseudomonas aeruginosa, Serratia marcescens and Staphylococcus aureus to HEMA-type contact lenses and an extended wear silicone hydrogel contact lens of high oxygen permeability.

PURPOSE: To compare multiple strains of Pseudomonas aeruginosa and representative isolates of Staphylococcus aureus and Serratia marcescens for their relative primary adhesion to a high Dk silicone hydrogel lens (36% H2O) with that of a HEMA-type lens (58% H2O). METHODS: A radiolabeled cell procedure with a 2-h cell exposure was employed for enumerating bacteria on unworn and worn silicone hydrogel (balafilcon A) and HEMA-type (etafilcon A) hydrogel lenses. RESULTS: The degree of primary adhesion of P. aeruginosa to 7-day worn balafilcon A lens was similar to the degree of adhesion to unworn balafilcon A lenses. The degree of primary adhesion by clinical strains to unworn balafilcon A lenses and etafilcon lenses was strain variable, but did not differ markedly for the two lenses with a given strain of P. aeruginosa. Relative to most of the pseudomonad strains, adhesion to the hydrogel lenses by S. aureus and S. marcescens was non-significant. CONCLUSION: Adhesion of strains of P. aeruginosa to a hydrogel contact lens does not appear to differ appreciably between the HEMA-type etafilcon A and the high Dk silicone hydrogel balafilcon A lens.     

An Applicable Strategy for Improvement Recovery in Simultaneous Analysis of 20 Pesticides Residue in Tea

It is important to have a reliable method to analyze pesticides in tea, a beverage commonly consumed in Iran. A validated method was developed for the determination of 20 pesticides in tea based on QuEChERS sample preparation and capillary gas chromatography‐quadrupole mass spectrometry in selective ion monitoring mode (GC‐MS/SIM) using triphenyl methane (TPM) solution as an internal standard. We used fortified, extracted, and cleaned‐up tea samples instead of calibration standards for quantitation, which substantially reduced adverse matrix‐related effects and negative recovery affected by graphite carbon black (GCB) on pesticide analysis. The recovery of pesticides at 3 concentration (40, 60, and 240 ng/g) ranged from 79.5% to 111.4% (n = 3). The method had acceptable repeatability with RSDr < 20%. The limits of quantification (LOQ) for all pesticides were ≤20 ng/g. The analytical results of the proposed method were in good agreement with proficiency test results (FAPAS, 19116). The recoveries and repeatabilities were in accordance with the criteria set by SANCO Guideline. The validated method was suitable for the analysis of pesticides in tea.     

CCN spectra, hygroscopicity, and droplet activation kinetics of secondary organic aerosol resulting from the 2010 Deepwater Horizon oil spill

Secondary organic aerosol (SOA) resulting from the oxidation of organic species emitted by the Deepwater Horizon oil spill were sampled during two survey flights conducted by a National Oceanic and Atmospheric Administration WP-3D aircraft in June 2010. A new technique for fast measurements of cloud condensation nuclei (CCN) supersaturation spectra called Scanning Flow CCN Analysis was deployed for the first time on an airborne platform. Retrieved CCN spectra show that most particles act as CCN above (0.3 ± 0.05)% supersaturation, which increased to (0.4 ± 0.1)% supersaturation for the most organic-rich aerosol sampled. The aerosol hygroscopicity parameter, κ, was inferred from both measurements of CCN activity and from humidified-particle light extinction, and varied from 0.05 to 0.10 within the emissions plumes. However, κ values were lower than expected from chemical composition measurements, indicating a degree of external mixing or size-dependent chemistry, which was reconciled assuming bimodal, size-dependent composition. The CCN droplet effective water uptake coefficient, γ(cond), was inferred from the data using a comprehensive instrument model, and no significant delay in droplet activation kinetics from the presence of organics was observed, despite a large fraction of hydrocarbon-like SOA present in the aerosol.     

Synthesis,characterization, and measurement of structural,optical, and phtotoluminescent properties of zinc sulfide quantum dots

A facile and rapid microwave irradiation method was developed to prepare ZnS nanoparticles (NPs) using a set of ionic liquids (ILs) based on the bis(trifluoromethylsulfonyl) imide anion and different cations of 1-alkyl-3-methyl-imidazolium. The phases, structures, and optical absorption properties of the NPs were determined in depth with X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Raman spectroscopy, UV–vis absorption spectroscopy (UV–vis), diffuse reflectance spectroscopy (DRS), and photoluminescence spectroscopy (PL). The average crystallite size of the ZnS NPs calculated from the XRD pattern was of the order of 2.8 nm which exhibits cubic zinc blende structure. The energy band gap measurements of NPs were carried out by UV and DRS. The results revealed that the ZnS NPs exhibit strong quantum confinement effect. The optical band gap energy increases significantly compared with those of the bulk ZnS. The refractive indices for different ZnS nanosamples and different concentrations of ZnS NPs for a typical sample suspended in deionized water were also measured.