罗茨真空泵的溢流阀与旁通阀的组合

在简要地介绍了罗茨泵功能的基础上，通过溢流阀的改进设计，使溢流阀成为既能旁通又能溢流的组合阀，罗茨泵的功能将更加完备。     

In—situ Composite Based on Poly （ethylene terephthalate）,Polyamide and Polyethylene with Microfibres Formed through Extrusion and Hot Stretching

In-situ composites based on dispersed poly (ethylene terephthalate) (PET) or polyamide (PA),and continuous Polyethylene (PE) were prepared through a single screw extruder of Haake rheometer system with a rod-die relatively small in diameter.The extrudate was drawn at a drawing ratio of 3.1,and then quickly cooled in cold water.The specimens were obtained by injection molding at processing temperatures less than 190℃，far below the melting temperature of PET (265℃) and PA (230℃),which can maintain the solid state of PET and PA microfiber phase in the composites.Morphological observation with scanning electron microscopy (SEM) indicated that PET and PA can more or less form in-situ microfibers at compositions studied (0-20 wt pct PET or PA),and especially,PET and PA were almost deformed into fibers at the concentration of 15wt pct.Eensile strength and especially.PET and PA were almost deformed into fibers at the concentration of 15wt pct.Tensile strength and modulus of the blends reinforced by PET or PA microfibers showed to be increased from the tensile test results.The most noticeable improvement of the tensile properties occurred at 15wt pct of PET in PET/PE system,corresponding to the highest microfiber content,where the tensile strength reached 32.5 MPa,whereas only 19.5 MPa for the pure PE.     

Estimation of viscosity of ternary-metallic melts

A new model, based on Seetharaman’s viscosity model and Chou’s geometric-thermodynamic model, to predict the viscosity of ternary-metallic melts has been established. The viscosities of Ag-Au-Cu and Ag-Sn-Cu systems have been calculated with the present model, and the results are consistent with the experimental data. The viscosities of Au-Ni-Cu, Fe-Ni-Cu, Al-Sn-Cu, and In-Sn-Bi systems have also been predicted by the present model.     

应用底饲回燃循环流化床技术改造东锅DG35/3.82-7型流化床锅炉

采用飞灰循环底饲回燃技术改造西南合成制药总厂热电分厂、天府矿务局磨心坡发电厂2台东方DG35/3.82-7型低倍率循环流化床锅炉。改造后运行结果表明,锅炉可长期、稳定运行,尾部飞灰可燃物含量大幅度降低,锅炉蒸发量提高20％左右,节煤效果明显。为燃用贫煤、无烟煤和煤矸石等劣质燃料且锅炉炉膛高度较低的电站技改,提供了一种切实可行的方法。     

塑料注射模的维修与保养

结合具体案例,简述了塑料注射模使用过程中常见的故障及排除方法,阐述了模具维修与保养的必要性。     

用分数延迟改进基音预测的CELP编码方案

在ＣＥＬＰ编码器中，通常用延迟为抽样间隔整数倍的长项预测器表征浊音语音的准周期性，然而在低比特率，这种限制降低了编码器的性能。本文在介绍了ＣＥＬＰ编码器原理及激励码本构成后，重点研究了一种新型的基音预测方法；分数延迟基音预测，计算机模拟结果表明，这种方法能对浊音进行更准确的表达，尤其对女性讲话者明显改善了语音质量。     

运用韦柏函数分析发动机燃烧过程时若干问题的探讨

探讨了韦柏函数的内涵及其在实际应用中的若干问题；应用双韦柏函数对涡流室式柴油机的燃烧过程进行分析，加深了对分隔室式发动机燃烧过程的认识．     

新一代银行大型机网络接入技术研究

银行大型机网络接入技术的转型是当前一个非常重要的研究与应用课题。文章在成功实现银行大型机网络接入技术转型的基础上,分析了相关新技术,解决了转型中的关键问题,提出并实现了一种稳定高效的银行大型机网络接入技术方案,对银行大型机网络接入技术的转型具有指导意义,对银行信息化技术研究具有重要参考价值。     

用投影预变换提高自适应波束形成的稳健性

在快拍数较少和（或）存在系统误差时，自适应波束形成的性能会变差，特别是会引起方向图副瓣电平升高——波束畸变。本文提出的投影变换法利用干扰方向的初略估计，在未精确预知阵列流形的条件下，可以显著改善自适应方向图的副瓣性能，并提高自适应算法的收敛性，计算机仿真结果验证了这一优点。