浅论食品添加剂的安全性

介绍了食品添加剂的定义、分类和作用 ,分析了国内外食品添加剂的现状、发展前景及存在的问题 ,综述了食品添加剂的安全性问题及监督管理办法。     

Research on the friction and wear mechanism of Poly(vinyl alcohol)/hydroxylapatite composite hydrogel

Poly(vinyl alcohol)/Hydroxylapatite (PVA/HA) composite hydrogel was prepared with poly(vinyl alcohol) and hydroxylapatite as raw materials, using the method of repeated freezing and thawing. The morphologies of PVA/HA composite hydrogel were observed by means of high-accuracy 3D profiler and scanning electron microscope (SEM). The compressive elastic modulus and the stress relaxation characteristics of PVA/HA composite hydrogel were measured using the flat-head cylinder indenter. The friction and wear tests between PVA/HA composite hydrogel and bovine knee articular cartilage were performed on the micro-tribometer. The worn morphologies of PVA/HA composite hydrogel were observed with environmental scanning electron microscope (ESEM). The results showed that PVA/HA composite hydrogel has the cross-link network microstructure which is similar to that of the natural bovine knee articular cartilages. With the increase of freezing-thawing cycles and the HA content, the degree of cross-link and the crystallization of PVA/HA composite hydrogel both increase, the elastic modulus increases evidently, the rate of stress relaxation is improved and the value of balance stress decreases. The friction coefficient decreases with the increase of the freezing-thawing cycles and the HA content. The more the freezing-thawing cycles are, the earlier the friction coefficient reaches the stable balance value. The friction deformation depth between PVA/HA composite hydrogel and bovine knee articular cartilage is inversely proportional to freezing-thawing cycles and the HA content. The main wear mechanisms of PVA/HA composite hydrogel are plastic flowing and adhesive flaking. The wear severity degree decreases with the increase of freezing-thawing cycles and the HA content. Supported by Key Program of the National Natural Science Foundation of China (Grant No. 50535050), Program for New Century Excellent Talents in University (Grant No. NCET-06-0479) and Natural Science Foundation of Jiangsu Province (Grant No. BK2005403)     

Synthesis and photoconductivity study of phthalocyanine polymers. I. PAA–CuPc(NO2)2

Cu–dinitro–diamino phthalocyanine was synthesized and converted to the diazonium salt. Polyacrylamide bonded CuPc(NO₂)₂ [PAA–CuPc(NO₂)₂] (I) was synthesized by hot polymerization of acrylamide and this diazonium salt. Polymer(I) is water soluble and contains about 7 mol % CuPc(NO₂)₂ rings, which are covalently bonded to PAA. Polymer(I) shows good photoconductivity, which is much better than that of the corresponding phthalocyanine monomers. By doping with iodine (I₂), the photosensitivity of polymer(I) is increased, which through fluorescence analysis is explained by the fact that a charge–transfer complex (CTC) of polymer(I) with I₂ is formed. The influence of interface layer (IFL) and charge–transportation material (CTM) on the photoconductivity of polymer(I) were also studied.     

断层模型约束反演在MTH地区煤层横向预测中应用研究

利用相干体确定断层平面的走向特征,在剖面上采用井点处断点引导小断层解释,准确落实其空间位置,并建立精细的断层模型,在此基础上,利用断层约束反演技术,进行煤层的横向预测。MTH地区实例表明,基于断层模型约束反演技术的煤层横向预测方法,可精细描述煤层变薄带、分叉合并带、厚度变化等赋煤状态。     

层间接触状态和横向力大小对车辙贡献率的影响

车辙贡献率是反映沥青路面各结构层车辙病害程度的一个主要参数,可用于指导沥青路面的设计和施工.利用三维有限元计算软件建立三维有限元模型用于理论分析,将有限元计算结果与理论解进行对比,验证了该三维有限元模型的可靠性.采用实测的轮胎接地压力,考虑不同层间接触状态和横向力大小,结合有限元计算的数据,分析了沥青路面结构层的车辙贡献率.结果表明:在层间完全连续状态下,横向力大小的选取不能简单地选取最大垂直轮胎接地压力的一定比例,而是要根据所研究的具体情况具体分析.在对沥青路面车辙贡献率的研究中,可以忽略层间接触状态,即假定层间完全连续.     

Acquisition algorithm assisted by AGC control voltage for DSSS signals

An appropriate acquisition configuration in terms of signal quality can optimize the acquisition performance. In view of this, a new approach of acquisition assisted by the control voltage of automatic gain control(AGC) is proposed. This approach judges the signal power according to the AGC control voltage and switches the working modes correspondingly and adaptively. Non-coherent accumulation times and the detection threshold are reconfigured according to the working mode. Theoretical derivation and verification by simulation in typical situations are provided, and the algorithm is shown to be superior in terms of the mean acquisition time, especially in strong signal scenarios compared with the conventional algorithm.     

大型尿素造粒塔新型的腐蚀防护

详细阐述了尿素造粒塔的腐蚀机理，就其中的内外侧的防腐蚀形态进行了总结，并就此针对性的进行了防腐蚀材料的推荐及设计，尤其是玻璃鳞片胶泥。     

高钒高速钢碳化钒形态的数值化分析

针对碳化钒的不同形态,设计出定量分析软件,并利用形状因子K,实现了高钒高速钢不同碳化物形态数值化处理,当K介于0.785～1.000之间碳化钒形态为团球状;K≤0.223,碳化钒呈开花状.高钒高速钢当碳含量达到4.2%时,K为0.86和当量直径D为0.78μm,碳化物呈团球状均匀分布.