Synthesis and Morphology of TiO2 Nanotube Arrays by Anodic Oxidation Using Modified Glycerol-Based Electrolytes

Titanium dioxide (TiO₂) nanotube arrays were prepared by electrochemical anodization of titanium sheets in the glycerol 176 mL/H₂O 44 mL/NH₄F 0.5 wt% electrolytes modified with H₂SO₄ and NaAc addition. The surface morphologies, average inner diameter, and the length of the nanotube arrays changed with the solution pH in the range from 5.6 to 4.0 by adding H₂SO₄. A uniform surface morphology of the nanotubes with average inner diameter of ∼80 nm and a length of ∼1000 nm was obtained when the solution pH was 5.0. The growth rates of the nanotubes were remarkably enhanced by NaAc addition in the range of 0.04–0.14 M . With NaAc addition of 0.10 M , the length of the nanotube arrays reached 4.16 μm after an 8-h anodization, increasing 3.23 μm compared with no NaAc addition. The relationship between solution pH and growth of TiO₂ nanotubes was analyzed by current–time curves, solution electrical conductivities, and scanning electron microscopy (SEM), and the role of NaAc was also discussed based on SEM and solution electrical conductivities.     

网络冗余技术在公司局域网的应用分析

随着SG186系统建设不断向企业的覆盖与延伸,信息网络的强健与否成为制约信息化系统应用的重要因素。本文通过对网络冗余技术的介绍,结合公司信息网络结构实际情况,通过应用实例分析,阐述如何合理使用网络冗余技术,确保信息网络的高可靠性。     

Synthesis and light‐emitting properties of new poly(p‐phenylenevinylene) derivatives containing oxadiazole moiety

Two new poly(p‐phenylenevinylene) (PPV) derivatives containing oxadiazole moiety (OXA‐PPV1 and OXA‐PPV2) were synthesized by the Wittig condensation polymerization reaction. Their thermal and light‐emitting properties were investigated. The single‐ and triple‐layer electroluminescent (EL) devices with configurations of ITO/polymer/Al and ITO/polymer/OXD‐7/Alq₃/Al were fabricated. They exhibited blue emission at 470 nm for OXA‐PPV1 and green emission at 560 nm for OXA‐PPV2. The turn‐on voltages of triple‐layer device were 11 V for OXA‐PPV1 and 8 V for OXA‐PPV2. The triple‐layer EL devices showed much better performance than did the single‐layer devices. The spectra indicated energy transfer occurred from segments of side chain to polymer backbone. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 422–428, 2002     

相分离对SiO2薄膜粗糙度的影响

用氨水做催化剂配制碱溶胶,用盐酸做催化剂配制酸溶胶,在酸、碱混合溶胶中添加聚丙稀酸(PAA)引发相分离,通过添加不同含量的PAA,制备出具有不同粗糙度的透明薄膜,随后经过三甲基氯硅烷(TMCS)修饰,具有疏水性能和不同的疏水效果。     

聚氨酯/聚丙烯酸酯复合乳液的研制进展

综述了近年来聚氨酯－丙烯酸酯（PUA）复合乳液研究的新进展，总结介绍了各类聚氨酯－聚丙烯酸酯复合乳液（PUA共混复合乳液、PUA复合核／壳乳液、互穿网络PUA复合乳液）的制备方法和性能特点。并对该领域进一步的发展作了展望。     

气相色谱法测定油墨中的六种溶剂

本文报道了用气相色谱法同时测定油墨中的正丁醇、丁酮、甲苯、乙酸丁酯、二甲苯、环己酮，这方法具有良好的精密度、回收率和线性关系，测定了四种油墨所含的溶剂。     

Relationships Between the Crystal Structures and the Multiple Melting Behaviors of Poly(ethylene 2,6‐naphthalate)

Summary: Poly(ethylene 2,6‐naphthalate) (PEN) can crystallize either from the glassy state or from the melt state. When crystallized from the glassy state, the sample was quenched from the melt in liquid nitrogen and then annealed at certain crystallization temperatures. When crystallized from the melt state, the sample was cooled to a preset temperature from the melt and then annealed for a certain time. The crystal modifications, morphologies and melting behaviors of PEN were investigated by means of wide‐angle X‐ray diffraction (WAXD), polarized optical microscopy (POM), small‐angle light scattering (SALS) and differential scanning calorimetry (DSC). The results show that an α crystal modification of PEN was obtained when PEN crystallized from the glassy state, whilst a β crystal modification was obtained when PEN crystallized from the melt state at a higher temperature. An hedritic morphology of PEN crystal was obtained with only one melting peak observed in DSC curves when PEN was crystallized at a higher temperature from either the glassy state or the melt state. The α crystal modification could also be obtained when PEN was crystallized at a lower temperature from the melt. Spherulitic or banded spherulitic morphologies of PEN crystals, exhibiting multiple melting peaks in DSC curves, were observed when PEN was crystallized at a lower temperature. The multiple melting behaviors of PEN crystals may be associated with spherulitic structures composed of lamellae of varying thickness.

WAXD patterns of PEN isothermally crystallized from different states.     

微晶纤维素增粘剂的研制

以棉浆为原料，废盐酸为水解催化剂，所得合成革用微晶纤锥素增粘剂的质量指标达到了德国和日本同类产品的标准。     

Study of different effect on foaming process of biodegradable bionolle in supercritical carbon dioxide

Microcellular foaming of biodegradable Bionolle in supercritical CO₂ has been produced. The effects of a series of variable factors, such as saturation temperature, saturation pressure, and depressurization time and step on the foam structures and density, were studied through measurement of density and SEM observation. The experimental results show that higher saturation temperatures lead to an increase in bulk densities; and different depressurization time and step result in different product cell morphology. In addition, at some saturation temperature, the orientation of the cells can be found in the product morphology. XRD experimental results show that the foaming treatment with SC CO₂ increased the crystallinity of Bionolle. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2901–2906, 2006     

我国烟草品牌延伸策略初探

随着<烟草控制框架公约>在我国的正式实施,烟草品牌的宣传将受到更大的制约,品牌延伸因此将成为烟草品牌发展路径的重要选择.论述了烟草行业实行品牌发展及品牌延伸策略的必要性,阐述了烟草品牌延伸的误区,提出了烟草品牌延伸的对策.