A One‐Kilobit PQR‐CMOS Smart Pixel Array

The photonic quantum ring (PQR) laser is a three dimensional whispering gallery (WG) mode laser and has anomalous quantum wire properties, such as microampere to nanoampere range threshold currents and √T‐dependent thermal red shifts. We observed uniform bottom emissions from a 1‐kb smart pixel chip of a 32×32 InGaAs PQR laser array flip‐chip bonded to a 0.35 µm CMOS‐based PQR laser driver. The PQR‐CMOS smart pixel array, now operating at 30 MHz, will be improved to the GHz frequency range through device and circuit optimization.     

Monolithic SiGe Up‐/Down‐Conversion Mixers with Active Baluns

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on‐chip 1 to 6 GHz up‐conversion and 1 to 8 GHz down‐conversion mixers using a 0.8 µm SiGe hetero‐junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up‐conversion mixer was implemented on‐chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up‐conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down‐conversion mixer was implemented on‐chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down‐conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.     

Computational Implementation of Asymmetric Integral Imaging by Use of Two Crossed Lenticular Sheets

We propose an asymmetric integral imaging method to adjust the resolution and depth of a three‐dimensional image. Our method is obtained by use of two lenticular sheets with different pitches fabricated under the same F/#. The asymmetric integral imaging is the generalized version of integral imaging, including both conventional integral imaging and one‐dimensional integral imaging. We present experimental results to test and verify the performance of our method computationally.     

A Silicon–Silica Nanocomposite Material

The synthesis and characterization of a novel silicon–silica nanocomposite material are reported. A self‐assembly method allows the encapsulation of silicon nanoclusters within the channels of a periodic mesoporous silica thin film. The result is the formation of a silicon–silica nanocomposite film with bright, room‐temperature photoluminescence in the visible range, and a nanosecond luminescence lifetime. The properties of the nanocomposite material have been studied by several analytical techniques, which collectively show the existence within the channels of non‐diamondoid‐structure‐type silicon nanoclusters with various hydrogenated silicon sites. It is estimated that the silicon nanoclusters in the silica mesoporous films occupy up to 39 % of the accessible pore volume. The nanocomposite film shows improved resistance to air oxidation compared to crystalline silicon. The high loading and chemical stability to oxidation under ambient conditions are important advantages in terms of the development of silicon‐based light‐emitting diodes from this class of materials.     

Prebiotic synthesis of sequential peptides on the Hadean beach by a molecular engine working with nitrogen oxides as energy sources

Addressing the still open question of the prebiotic origin of sequential macromolecules (peptides, nucleic acids) on the primitive Earth, we describe a molecular engine (the primary pump), which works at ambient temperature and continuously generates, elongates and complexifies sequential peptides. This new scenario is based on a cyclic reaction sequence, whose keystep is the activation of amino acids into their N‐carboxyanhydrides (NCA) through nitrosation by NOx. This process could have taken place on tidal beaches; it requires a buffered ocean, emerged land and a nitrosating atmosphere. With the help of geochemical studies and computer simulations of atmosphere photochemistry, we show that the primitive Earth during the Hadean may have satisfied all these requirements. © 2001 Society of Chemical Industry.     

The influence of NaCl and CO2 on the atmospheric corrosion of magnesium alloy AZ91

The influence of NaCl and CO₂ on the atmospheric corrosion of magnesium alloy AZ91 is studied in the laboratory. Samples were exposed under carefully controlled air and flow conditions; the relative humidity was 95%, the temperature was 22.0°C and the concentration of CO₂ was < 1 ppm or 350 ppm. Different amounts of sodium chloride (0–70 μg/cm²) were added before exposure. The corrosion products were analyzed by gravimetry, ion chromatography, X‐ray diffraction and scanning electron microscopy. Mass gain and metal loss results are reported. The combination of high humidity and NaCl is very corrosive towards AZ91. However, the NaCl‐induced corrosion is inhibited by ambient concentrations of CO₂. Exposure in the absence of CO₂ gives rise to heavy pitting, with brucite, Mg(OH)₂, being the dominant corrosion product. In the presence of CO₂ a layer of hydrated magnesium hydroxy carbonate, Mg₅(CO₃)₄(OH)₂ · 5 H₂O forms. A tentative corrosion mechanism is presented that explains the behavior in the two environments.     

Pseudorandomness of Basic Structures in the Block Cipher KASUMI

The notion of pseudorandomness is the theoretical foundation on which to consider the soundness of a basic structure used in some block ciphers. We examine the pseudorandomness of the block cipher KASUMI, which will be used in the next‐generation cellular phones. First, we prove that the four‐round unbalanced MISTY‐type transformation is pseudorandom in order to illustrate the pseudorandomness of the inside round function FI of KASUMI under an adaptive distinguisher model. Second, we show that the three‐round KASUMI‐like structure is not pseudorandom but the four‐round KASUMI‐like structure is pseudorandom under a non‐adaptive distinguisher model.     

Near‐Infrared Light‐Emitting Diodes (LEDs) Based on Poly(phenylene)/Yb‐tris(β‐Diketonate) Complexes

Near‐infrared‐emitting electroluminescent (EL) devices using blue‐light‐emitting polymers blended with the Yb complexes Yb(DBM)₃phen (DBM = dibenzoylmethane), Yb(DNM)₃phen (DNM = dinaphthoylmethane), and Yb(TPP)L(OEt) (L(OEt) = [(C₅H₅)Co{P(O)Et₂}₃]^–) have been studied. EL devices composed of Yb(DNM)₃phen blended with PPP‐OR11 showed enhanced near‐IR output at 977 nm when compared to those fabricated with Yb(DBM)₃phen/PPP‐OR11 blends. The maximum near‐IR external efficiencies of the devices with Yb(DBM)₃phen and Yb(DNM)₃phen are, respectively, 7 × 10^–5 (at 6 V and at 0.81 mA mm^–2) and 4 × 10^–4 (at 7 V, and 0.74 mA mm^–2). The optimal blend composition for EL device performance consisted of PPP‐OR11 blended with 10–20 mol‐% Yb(DNM)₃phen. A device fabricated using Yb‐(TPP)L(OEt)/PPP‐OR11 showed significantly enhanced near‐IR output efficiency, and future efforts will focus on devices fabricated using porphyrin‐based materials.