Die quenching limit of AA2024 aluminum alloy billet on servo press

Die quenching of AA2024 aluminum alloy billets was carried out on a servo press with ram-motion control of WC-20 mass%Co dies directly after solution heat treatment (SHT). To clarify the dependence on billet size for die quenching, two billets with a height of h₀ = 8 mm or 16 mm and with the same diameter of 16 mm were prepared. The cylindrical billets were heated in an electric furnace at 823 K and transferred to the press. Then the billets were uniaxially compressed with a reduction in height (Δh/h₀) of 2% or 5%, and further held between the dies. The sandwiching duration by dies (t_d.q.) was varied from 0 to 8 s. Based a measured temperature change, hardness and TG–DTA analysis, it is found that die quenching is successfully carried out without precipitation hardening only in the case of the billet with a height of 8 mm and t_d.q. > 6 s. The reduction in height is limited less than 5% by intergranular fracture on side surface of billet during the die quenching process.     

Microencapsulation of bioactive compounds from mulberry (Morus alba L.) leaf extracts by protein–polysaccharide interactions

Mulberry leaf extracts were generated using four concentrations of ethanol (50%, 60%, 70%, and 95% v/v). A 60% ethanolic mulberry leaf extract (60E) yielded a high total phenolic content (TPC) and antioxidant activity using 1, 1‐diphenyl‐2‐picrylhydrazyl (DPPH) radical scavenging and a ferric reducing antioxidant power (FRAP) assay. Coating materials were derived using a combination of soy protein isolates (SPI) and low methoxyl (LM) pectin in a 1:1 ratio. The effect of various parameters on microencapsulation, such as pH (3.5, 4.0, and 4.5) and the concentration of coating materials (2.5, 5.0 and 7.5% w/v), was studied. Microcapsules produced using 60E as a core material at pH 4.0 with 7.5% of coating material showed a high encapsulation yield, encapsulation efficiency, TPC and antioxidant activity.     

Metal powder bed fusion in high gravity

Many studies have focused on the stabilization of additive manufacturing (AM) in microgravity for its use in various space projects. Nevertheless, this paper presents a vital clue for innovating metal AM technologies from the perspective of high gravity. High-gravitational powder bed fusion has an excellent potential to address various challenges in AM, such as density enhancement, spatter suppression, and precise fabrication. This study summarizes an analogy among phenomena in different gravitational fields and establishes a combined machine for centrifuge and powder bed fusion. The results confirm the spatter suppression and fine-powder availability in high gravity, both theoretically and experimentally.     

Cationic polymerization behavior of β‐methylglycidyl ether derivatives and physical properties of their cationically cured materials

β‐Methylglycidyl ethers have been applied to Electrical and Electronic adhesives. However, there is no report about the detailed polymerization behavior and physical properties of their cured products. Hence, we investigated cationic polymerization behavior of bisphenol A di(β‐methylglycidyl) ether (Me‐BADGE) and physical properties of the cured products containing Me‐BADGE. DSC analysis suggested that Me‐BADGE could be cured completely at lower temperature than bisphenol A diglycidyl ether (BADGE). Physical properties were analyzed by dynamic viscoelastic analysis. Glass transition temperature (T_g) of BADGE homopolymer was 194°C. In contrast, the copolymer of BADGE (50 wt %) with Me‐BADGE (50 wt %) showed T_g at 124°C. According to the data of E’ and tan δ, crosslink density of the cured products decreased with increasing the Me‐BADGE content. The analysis of cationic polymerization of monofunctional β‐methylglycidyl ether suggested that the cationic polymerization proceeded not only through oxonium cation but also through carbocation formed by ring‐opening reaction of oxonium cation. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42377.     

Regional income disparities in an OLG structure

This study examines a two-region OLG mode, in which parents educate their children and choose their location freely; that is, the population distribution and each worker’s productivity are determined endogenously. Owing to the setting of both agglomeration economies in wage and agglomeration diseconomies in utility and thereby different consumption patterns between regions, the present model represents a generation of inequality in educational level between regions even when households with equivalent education are given. Incentive for interregional segregation by educational level is also assumed and inequality is persistent in the result. This model demonstrates a development process starting with a low-developed initial state that represents population concentration accompanied with human capital growth and expansion of interregional inequalities. In addition, the effects of policies on long-run equilibria are addressed along with lock-in effects against these policies.     

Correlations of Hepatic Hemodynamics,Liver Function,and Fibrosis Markers in Nonalcoholic Fatty Liver Disease: Comparison with Chronic Hepatitis Related to Hepatitis C Virus

The progression of chronic liver disease differs by etiology. The aim of this study was to elucidate the difference in disease progression between chronic hepatitis C (CHC) and nonalcoholic fatty liver disease (NAFLD) by means of fibrosis markers, liver function, and hepatic tissue blood flow (TBF). Xenon computed tomography (Xe-CT) was performed in 139 patients with NAFLD and 152 patients with CHC (including liver cirrhosis (LC)). The cutoff values for fibrosis markers were compared between NAFLD and CHC, and correlations between hepatic TBF and liver function tests were examined at each fibrosis stage. The cutoff values for detection of the advanced fibrosis stage were lower in NAFLD than in CHC. Although portal venous TBF (PVTBF) correlated with liver function tests, PVTBF in initial LC caused by nonalcoholic steatohepatitis (NASH-LC) was significantly lower than that in hepatitis C virus (C-LC) (p = 0.014). Conversely, the liver function tests in NASH-LC were higher than those in C-LC (p < 0.05). It is important to recognize the difference between NAFLD and CHC. We concluded that changes in hepatic blood flow occurred during the earliest stage of hepatic fibrosis in patients with NAFLD; therefore, patients with NAFLD need to be followed carefully.     

Focus on Extracellular Vesicles: Development of Extracellular Vesicle-Based Therapeutic Systems

Many types of cells release phospholipid membrane vesicles thought to play key roles in cell-cell communication, antigen presentation, and the spread of infectious agents. Extracellular vesicles (EVs) carry various proteins, messenger RNAs (mRNAs), and microRNAs (miRNAs), like a “message in a bottle” to cells in remote locations. The encapsulated molecules are protected from multiple types of degradative enzymes in body fluids, making EVs ideal for delivering drugs. This review presents an overview of the potential roles of EVs as natural drugs and novel drug-delivery systems.     

Application of Near-Infrared Spectroscopy for Evaluation of Drying Stress on Lumber Surface: A Comparison of Artificial Neural Networks and Partial Least Squares Regression

This study aimed to examine the feasibility of evaluating the stress level at the surface of lumber during drying using near-infrared (NIR) spectroscopy combined with artificial neural networks (ANNs). Sugi (Cryptomeria japonica D. Don) lumber with an initial moisture content ranging from 41.1 to 85.8% was dried using a commercial drying schedule. An ANN model for predicting surface-released strain (SRS) was developed based on NIR spectra collected from the lumber during drying. The predictive ability of the ANN model was compared with a partial least squares (PLS) regression model.

The ANN model showed good correlation between laboratory-measured SRS and predicted SRS with an R ² of 0.79, a root mean square error of prediction (RMSEP) of 0.0009, and a ratio of performance to deviation (RPD) of 1.81. The PLS regression model gave a lower R ² of 0.69, a higher RMSEP of 0.0010, and a lower RPD of 1.38 than the ANN model, suggesting that the predictive performance of the ANN model was superior to the PLS regression model. The SRS evolution during drying as predicted by the models showed a similar trend to the laboratory-measured one. The predicted elapsed times to reach maximum tensile SRS and stress reversal roughly coincided with the laboratory-measured times. These results suggest that NIR spectroscopy combined with multivariate analysis has the potential to predict the drying stress level on the lumber surface and the critical periods during drying, such as the points of maximum tensile stress and stress reversal.