Possible 3He Boltzmann Gas Formed on Three-Dimensional Nanopores Preplated with 4He

We have measured the heat capacity of ³He adsorbed on three-dimensionally connected nanopores, 2.7 nm in diameter, preplated with about 1.3 atomic layers of ⁴He. At low coverages of ³He, the ³He heat capacity is roughly constant at the measured temperatures between 0.1 and 1 K. Its molar heat capacity is on the order of the gas constant R, between 1.1R and 1.8R. This suggests a Boltzmann gas state of the adsorbed ³He. At high coverages, the heat capacity is likely approaching linear in T at low temperatures, which suggests a degenerate state at further lower temperatures.     

Disintegration process of yttria-stabilized zirconia ceramics using hydrothermal conditions

Capability of the recycling of high strength and high fracture toughness yttria-stabilized tetragonal zirconia polycrystalline (Y-TZP) sintered body utilizing “low-temperature annealing degradation” phenomenon was investigated. Hydrothermal treatment was employed to induce the phase transformation from tetragonal to monoclinic zirconia and to disintegrate the Y-TZP sintered body. 3 mol% Y₂O₃–ZrO₂ specimens sintered at 1,550 °C and more were disintegrated without leaving the original appearances when the treatment temperature was between 200 °C and 400 °C. The size of the disintegrated fragments of Y-TZP sintered body was much affected by hydrothermal treatment conditions. Only with hydrothermal treatment and simple ball milling, the sintered body was pulverized into the primary particle level. This technique is expected to apply to a sustainable recycling system for the zirconia ceramics, which restrains an energy consumption compared to crushing zirconia using mechanical procedures.     

Compensation of Interchannel Crosstalk Induced by Optical Fiber Nonlinearity in Carrier Phase-Locked WDM System

A scheme that compensates the waveform distortion induced by nonlinear interchannel crosstalk such as four-wave mixing (FWM) and cross-phase modulation as well as self-phase modulation in phase-locked wavelength-division-multiplexing transmission systems is proposed. Reduction of FWM-induced waveform distortion by controlling the phase relationship between neighbouring channels and its cancellation by precompensation is successfully demonstrated     

A Passive UHF RF Identification CMOS Tag IC Using Ferroelectric RAM in 0.35-μm Technology

A passive UHF RF identification (RFID) tag IC with embedded 2-KB ferroelectric RAM (FeRAM) for rewritable applications enables a 2.9 times faster read-and-write transaction time over EEPROM-based tag ICs. The resulting FeRAM-based tag has a nominally identical communication range for both read and write operations, which is indispensable for data write applications. The evaluated tag communication range with a folded dipole antenna is from 0 m to 4.3 m, at the 953-MHz carrier frequency with 4-W transmitting Effective Isotropic Radiated Power (EIRP) from a reader/writer. The developed tag IC features two circuit blocks to maximize the communication range in 0.35-mum CMOS/FeRAM technology. First is a CMOS-only full-wave rectifier, which can improve the measured efficiency by up to 36.6% by reducing the input parasitic capacitances and optimization of multiplier structure. This efficiency is more than twice that of previously-published results. Second is a low-voltage current-mode ASK demodulator to accommodate a low-breakdown voltage of FeRAM, which converts the ASK power modulation into a linearly modulated current over an incoming power range of 27 dB, corresponding to the entire communication range. The developed demodulator can thus resolve the primary design tradeoff issue between device protection and detection sensitivity in the conventional voltage-mode demodulator     

Wide-wavelength tunable lasers with 100 ghz fsr ring resonators

A widely tunable laser, consisting of a 100 GHz FSR triple-ring resonator and a semiconductor optical amplifier, is presented. The 100 GHz FSR ring resonator makes it possible to demonstrate 96 nm wavelength tuning with stable single-mode operation produced by a large threshold gain difference     

Color displays and flexible displays using quick‐response liquid‐powder technology for electronic paper

Abstract— Color displays and flexible displays that use electronic liquid powder have been developed. Novel types of color displays using either a colored powder or a color filter are discussed. We have also developed a flexible display with low‐cost substrate films with a high‐throughput roll‐to‐roll manufacturing method. These technologies enable a QR‐LPD to be widely used as an electronic‐paper display.     

Characterisation of optically driven microstructures for manipulating single DNA molecules under a fluorescence microscope

Optical tweezers are powerful tools for manipulating single DNA molecules using fluorescence microscopy, particularly in nanotechnology‐based DNA analysis. We previously proposed a manipulation technique using microstructures driven by optical tweezers that allows the handling of single giant DNA molecules of millimetre length that cannot be manipulated by conventional techniques. To further develop this technique, the authors characterised the microstructures quantitatively from the view point of fabrication and efficiency of DNA manipulation under a fluorescence microscope. The success rate and precision of the fabrications were evaluated. The results indicate that the microstructures are obtained in an aqueous solution with a precision ∼50 nm at concentrations in the order of 10⁶ particles/ml. The visibility of these microstructures under a fluorescence microscope was also characterised, along with the elucidation of the fabrication parameters needed to fine tune visibility. Manipulating yeast chromosomal DNA molecules with the microstructures illustrated the relationship between the efficiency of manipulation and the geometrical shape of the microstructure. This report provides the guidelines for designing microstructures used in single DNA molecule analysis based on on‐site DNA manipulation, and is expected to broaden the applications of this technique in the future.Inspec keywords: DNA, molecular biophysics, fluorescence, optical microscopy, radiation pressure, biological techniquesOther keywords: optically driven microstructures, single DNA molecule analysis, fluorescence microscopy, optical tweezers, nanotechnology‐based DNA analysis, manipulation technique, aqueous solution, fine tune visibility, yeast chromosomal DNA molecules, geometrical shape, on‐site DNA manipulation     

Spectral mixture analysis for bi-sensor wetland mapping using Landsat TM and Terra MODIS data

Spatial and temporal resolution is essential for understanding the spatial and temporal characteristics and dynamics of wetland ecosystems. However, single satellite imagery with both high spatial resolution and high temporal frequency is currently unavailable. Instead, the development of a bi-sensor monitoring technique utilizing spatial details of middle-to-high resolution data and temporal details of coarse spatial resolution data is highly desirable. For the initial work on our time-series bi-sensor wetland mapping, the applicability of multiple endmember spectral mixture analysis (MESMA) using single-date bi-sensor imagery with different orbiting periods was investigated. Landsat-5 Thematic Mapper (TM) and Terra Moderate Resolution Image Spectrometer (MODIS) data were utilized in the Poyang Lake area in China and the Great Salt Lake area in the USA to examine three decisive elements in utilizing MESMA: (1) the method of optimal endmember selection; (2) the threshold between two- and three-endmember models; and (3) the treatment of shade fractions. As a result, we found that (1) the number of spectra for an endmember spectrum similar to other endmember spectra meeting the modelling restrictions of maximum and minimum land-cover fractions and root mean square error (RMSE) within a class (In_CoB), the number of spectra for an endmember spectrum similar to other endmember spectra meeting the modelling restrictions outside of a class (Out_CoB), the ratio of In_CoB to Out_CoB multiplied by the inverse number of spectra within the class (CoBI) and the endmember average RMSE (EAR) were optimal endmember selection methods for the TM maps, whereas CoBI, EAR and minimum average spectral angle (MASA) were optimal endmember selection methods for the MODIS maps; (2) the MODIS maps were more sensitive to change in the two- and three-endmember modelling thresholds than the TM maps; and (3) the addition of shade fractions to dark water fractions were an appropriate shade treatment. This research demonstrated how MESMA can be applied for multi-scale mapping of wetland ecosystems, how the difference in observation dates between the TM and MODIS data affects the agreement in land-cover fractions and how spectral similarity between dark water and shade affects the agreement in land-cover fractions.     

Self-dissolving micropile array tips for percutaneous administration of insulin

Two kinds of insulin were loaded into self-dissolving micropile array tip (following tip). Fully-loaded tip (f-tip) and partially-loaded tip (p-tip) were prepared using chondroitin sulfate for the percutaneous administration of insulin. One hundred micropiles were constructed on a 1.0 × 1.0 cm tip. The mean length of the micropile in a tip were 483.4 ± 4.7 μm for the f-tip and 492.6 ± 2.4 μm for the p-tip. The insulin content of the p-tip was 28.5% of that of the f-tip. The pharmacological efficiency of insulin loaded tip was evaluated in rat experiments by measuring their hypoglycemic effects. The maximum hypoglycemic effect of insulin was observed at 1.7 ± 0.2 h for the f-tip and 1.5 ± 0.2 h for the p-tip. Good dose-dependency was observed for the plasma glucose level vs. time curves. These results suggest the usefulness of p-tip as a percutaneous DDS of insulin.     

Long-span optical FSK heterodyne single-filter detection transmission experiment using a phase-tunable DFB laser diode

High receiver sensitivity (?51.9 dBm) and long span (243 km) transmission expriments have been achieved with a 140 Mbit/s optical FSK heterodyne single-filter detection system, using a phase-tunable DFB laser diode as a transmitter. This has enabled direct FSK modulation without waveform distortion. Also, a 280 Mbit/s 204 km transmission experiment has been carried out successfully.