Elevated expression of epidermal ornithine decarboxylase mRNA in scleroderma

Using in situ hybridization techniques, we examined the expression of ornithine decarboxylase (ODC) mRNA in the skin of five patients with systemic sclerosis (SSc) and five normal controls. Sections treated with an anti-sense probe showed concentrated grains exclusively in the epidermis of SSc patients, but not in that of normal controls. Because our subcloned anti-sense probe specifically hybridizes with ODC mRNA, these findings indicate that the expression of ODC mRNA is elevated in SSc epidermis. Possibly polyamines have an important part to play in the skin changes of SSc.     

Wide gamut LCD using locally dimmable four‐primary‐color LED backlight

This paper proposes a wide gamut LCD using locally dimmable four‐primary‐color (4PC) LED backlight. Although the color gamut of LCDs has been improved in recent years, it is insufficient to reproduce all the colors in the real world. The objective of this paper is to propose a wide gamut LCD that reproduces all the colors in the real world while keeping the cost increases to a minimum. We evaluated the color gamut reproduced by LEDs of multiple primary colors and selected cyan as the optimal color to be added to the three primary colors to reproduce all the colors in the real world. Therefore, we designed an LED backlight consisting of an additional only‐cyan LED with three‐primary‐color LEDs and developed a prototype LCD with 4PC LED backlight. Furthermore, we developed a local dimming algorithm for the 4PC LED backlight. As a result, we confirmed that the prototype LCD with the 4PC LED backlight is able to cover almost all the colors in the real world and also able to display natural images with highly saturated colors by local dimming.     

Large magnetoresistivity of sputtered Al-(O or N)-Bi alloys

Application of the sputtering technique to (Al₂O₃)_xBi_100–x and (AIN)_x Bi_100–x (x = 0 to 100%) has been found to result in the formation of a duplex material consisting of hexagonal bismuth particles dispersed finely and homogeneously in amorphous Al_xO_y and Al_xN_y matrices. The particle size and interparticle distance of the bismuth phase were about 5 to 140nm and 5 to 35 nm. The duplex alloys have high electrical resistivities ranging from 1.82 × 10³ to 3.16 × 10⁵ cm combined with a negative temperature-dependent resistivity of 148 to 342% of ₂₇₃. Furthermore, all the Al-O-Bi and Al-N-Bi alloys have been found to exhibit a positive magnetoresistive change and the maximum value, (H), at 4.2 K and 7.5T reaches 5.85 × 10⁴ cm for (Al-O)_65.7Bi_34.3 and 1.99 × 10⁵ cm for (Al-N)_69.7 Bi_30.3. The large magnetoresistivities are probably due to the unique sputtered structure consisting of metallic bismuth particles with a long mean free path of electrons embedded finely and homogeneously in amorphous Al_xO_y or Al_xN_y matrix, resulting in the large difference of the relaxation times (different mobilities) of electron carriers. It has thus been demonstrated that the oxide- or nitride-based composite materials exhibiting large magnetoresistivities, which cannot be achieved in metallic composite materials, are obtained by sputtering simultaneously Al₂O₃ or AIN and bismuth which is immiscible to aluminium.     

High-field superconductivity in Al-O-Pb and Al-O-Pb-Bi sputtered films

The sputter-quenched Al _x O _y alloys containing lead and bismuth elements, which are insoluble to aluminium; have been found to exhibit a remarkably enhanced upper critical field,H _c2, which is higher by about 6 to 66 times than those of pure lead metal and Pb₆₀Bi₄₀ alloy. The sputtered structure consists of amorphous Al _x O _y and f c c lead or h c p (lead-bismuth) phases. The lead and phases disperse homogeneously in the amorphous matrix and their particle sizes and interparticle distances are about 10 to 20 nm and 5 to 20 nm, respectively, for lead and particles. The superconducting transition temperature,T _c, upper critical magnetic field,H _c2, at 4.3 K, and residual resistivity at 10 K are 7.74 K, 3.3 T and 2.09 × 105cm, respectively, for (Al-O)_92.8 Pb_7.2 and 7.45 K, 8.2 T and 1.70 × 106 cm, respectively, for (Al-O)_86.2(Pb_0.6 Bi_0.4)_13.8. The remarkable enhancement ofH _c2 is interpreted as being mainly due to a remarkable decrease of the coherence length resulting from a large reduction of the effective mean free path of electrons. Additionally, the fluxoid pinning force under applied field has also been markedly enhanced for the duplex structure films than for sputtered lead film, probably because of the change of the dispersed lead phase into a type-II superconductor and an effective fluxoid pinning action at the interface between Al _x O _y and fine lead particles.     

The Roles of 3- and 4-Isopropylbiphenyls in the Isopropylation of Biphenyl over a H-Mordenite

The isopropylation of mixtures of 3- and 4-isopropylbiphenyls (3- and 4-IPBPs) was examined over a dealuminated H-mordenite (HM) to elucidate the role of 3- and 4-IPBPs in the isopropylation of biphenyl (BP). 4-IPBP was consumed much faster than 3-IPBP in all cases. 4-IPBP was an exclusive precursor to diisopropylbiphenyls (DIPBs), particularly 4,4-DIPB, and 4,4-DIPB was found in encapsulated products during the reaction. These results show that 4-IPBP can allow establishment of an active complex with propylene and acid site in HM pores, whereas 3-IPBP cannot. It is concluded that the isopropylation of BP over HM occurs through a reactant selectivity mechanism, and through a restricted transition state mechanism, but not through a product selectivity mechanism.     

Graft copolymerization of styrene onto cellulose acetate p-nitrobenzoate by chain transfer reaction

Styrene was grafted onto cellulose acetate p-nitrobenzoate (CANB) by chain transfer reaction of growing polymer radicals to the pendant nitro groups of CANB. A copolymer with a branch for every 17.2 nitro groups was obtained. This result indicates that the pendant aromatic nitro group is more effective in obtaining a graft copolymer by radical mechanism than pendant double bond on the trunk polymer previously reported, where graft copolymers with a branch for several hundred of double bonds are produced.     

Enzymatic modification of canola/palm oil mixtures: Effects on the fluidity of the mixture

The bioreactor system to interesterify edible oils and fats at an ultra-micro aqueous phase of 100 ppm and less was investigated. The adsorption of lecithin, together with lipase onto a carrier, was effective for conducting the interesterifying reaction efficiently for oils and fats in micro aqueous phase. To improve the handling properties of palm oil at rather low temperature, palm oil was blended with canola or soybean oil, and then these blended oils were modified by enzymatic selective interesterification in a solvent-free, ultra-micro aqueous bioreactor system with an immobilized lipase that had 1,3-positional specificity. The effects of enzymatic interesterification were confirmed by triglyceride determination, by solid fat content profiles and by cloud point profiles, which were also compared to products of chemical interesterification. The improvement in the fluidity of blended oils with canola oil by the enzymatic reaction was bigger than with soybean oil, and chemical interesterification had no effects on the fluidity of blended oils.     

Novel CO2 Absorbents Using Lithium-Containing Oxide

We have discovered a series of lithium-containing oxides that immediately react with ambient carbon dioxide (CO₂) up to 700°C. The products react and return reversibly to the oxides at a temperatures higher than about 700°C. The absorption capacity surpasses that of other CO₂ absorbents by a factor of 10. Utilizing these absorbents, the possibility of a CO₂ separation system that operates at around 500°C is proposed. It is generally believed that a CO₂ separation process operable at temperatures higher than 500°C has the special benefit of a small energy penalty. Moreover, the absorption also proceeds at ambient temperature in the atmospheric environment. This property offers the possibility of many other applications, such as air cleaners or cartridges. Therefore, we think these materials have the potential to make a valuable contribution to the realization of CO₂ emission control.     

Thermal Response and Oxidation of Tyranno™-Fiber-Reinforced Si-Ti-C-O Matrix Composites for a Thermal Protection System in High-Enthalpy Dissociated Air

The thermal response and oxidation of Tyranno™ Lox-M fiber-reinforced Si-Ti-C-O matrix composites in high-enthalpy dissociated air was investigated in an arc jet facility (an arc wind tunnel). The maximum surface temperature reached 1310–1670°C. Catalytic recombination of oxygen and nitrogen on the composite surface under dissociated air was not significant. Surface recession was insignificant below 1600°C surface temperatures and above 5 kPa of oxygen partial pressure at the stagnation point. Passive-to-active oxidation transition of the composite agreed with Balat's theory for monolithic silicon carbide. A glass sealant prevented active oxidation of the composite for short-time exposures.     

Proposal of variable sequential sampling plan having desired operating characteristics indexed by quality loss

The proportion of non-conforming items has been traditionally utilised as an evaluation criterion for quality of items. However, the proportion of non-conforming items is not necessarily useful as a proper evaluation criterion for controlling high-quality manufacturing in recent years. Accordingly, in order to achieve further quality improvement and innovation, more careful quality evaluation has been required newly. Then, a concept of quality loss in the Taguchi methods has been devised as a severe criterion of quality evaluation. Hereby, a variable single sampling plan having desired operating characteristics (OCs) indexed by quality loss has been proposed in the area of statistical quality control. By the way, the most economical sampling inspection in the average sample number (ASN) is the sequential sampling plan based on the Wald’s sequential probability ratio test. Then, from the viewpoint of cost reduction, we discuss a variable sequential sampling plan having desired OC indexed by quality loss with the aim of expansion of the utility of variable sampling plan for quality loss. As the result, the design procedure of the sequential sampling plan for satisfying some required design conditions indexed by quality loss is provided. In addition, the effectiveness of the proposed sequential sampling plan is verified through some numerical examples.