Novel CO2 Absorbents Using Lithium-Containing Oxide

We have discovered a series of lithium-containing oxides that immediately react with ambient carbon dioxide (CO₂) up to 700°C. The products react and return reversibly to the oxides at a temperatures higher than about 700°C. The absorption capacity surpasses that of other CO₂ absorbents by a factor of 10. Utilizing these absorbents, the possibility of a CO₂ separation system that operates at around 500°C is proposed. It is generally believed that a CO₂ separation process operable at temperatures higher than 500°C has the special benefit of a small energy penalty. Moreover, the absorption also proceeds at ambient temperature in the atmospheric environment. This property offers the possibility of many other applications, such as air cleaners or cartridges. Therefore, we think these materials have the potential to make a valuable contribution to the realization of CO₂ emission control.     

Vapor phase hydroformylation of ethene over Co/SiO2 promoted by noble metals: dynamic in situ diffuse reflectance FT-IR study of surface species

An in situ diffuse reflectance FT-IR technique was employed to investigate the active surface species and the reaction mechanism of the oxygenate formation in the vapor phase hydroformylation of ethene on Co/SiO₂ promoted with various noble metals such as Ir, Rh, Pt, Re, Ru, and Pd. Co(A)/SiO₂ and Ir(CO)/SiO₂ which were derived from cobalt(II) acetate and Ir₄(CO)₁₂, respectively, were quite inactive in the reaction, and showed only quite small peaks of adsorbed CO under the conditions of 1.1 MPa of C₂H₄/CO/H₂ at 298 K. In contrast, Co(A)-Ir(CO)/SiO₂, which were very active in the reaction, exhibited strong absorption bands of linear and bridged CO species. At 423–463 K, propanal adsorbed on the catalyst and acyl species which is suggested as the intermediate for the formation of propanal were also observed on this catalyst. By exposing CO preadsorbed on this catalyst to C₂H₄/H₂ at 289 K and 0.1 MPa, the intensity of the linear CO band decreased, and the bands of propanal and acyl species emerged simultaneously, whereas that of the bridged CO band remained constant after the initial drop. These results suggested that the oxygenates are formed via the CO insertion into adsorbed ethyl species, and linear CO species plays a major role in the CO insertion on these noble metal-promoted cobalt catalysts.     

Combination of cytomegalovirus enhancer with human cellular promoters for gene-induced chondrogenesis of human bone marrow mesenchymal stem cells

High-expression plasmid vectors for human mesenchymal stem cells (MSCs) were constructed by combination of cytomegalovirus immediate-early enhancer with cellular promoters. MSCs transfected with the vector showed higher transgene production of a cytokine, which increased the differentiation level to chondrocytes.     

Evaluation of the redox stability of segmented-in-series solid oxide fuel cell stacks

The tolerance for the reduction and oxidation (redox) reactions of the segmented-in-series solid oxide fuel cells (SIS-SOFCs) has been investigated. In conventional anode-supported solid oxide fuel cells (SOFCs), the anode and the substrate are typically prepared from Ni-YSZ-based materials which exhibit a significant dimensional change because of the redox reaction and cannot retain their structure. The substrate of the SIS-SOFCs is prepared from Ni-doped MgO-based material, which has a high redox tolerance, and the SIS-SOFC exhibits a good performance after the redox cycles.The degradation rate is approximately 0.15% per cycle in a redox condition of start-and-stop operation without fuel supply. In the other redox condition (when the fuel supply is interrupted for 1.5 min), the voltage of the SIS-SOFCs remains almost constant. However, the voltage of SIS-SOFCs decreases with an increase in the reoxidation time of the interruption in the fuel supply. The high redox tolerance is attributed to the fact that the diffusion coefficients, mean free path, and existence of the Ni particles in the substrate can effectively deter the oxidation of the anode.     

Preparation of BaTiO3 ultrafine particles by micro-emulsion charring method

Ultrafine BaTiO₃ particles were prepared by a micro-emulsion charring (MEC) method. The MEC method consisted of two steps. The first step is the preparation of a water/oil micro-emulsion with BaTiO₃ elements, and the second is a low temperature firing process in N₂ atmosphere, which includes charring of oil in an emulsion and powdering BaTiO₃ particles with the char. The char formed around BaTiO₃ particles prevents an agglomeration of BaTiO₃ particles during firing. In the present experiment, the W/O ratio and the amount of emulsifier greatly influenced the size of droplets of the emulsion. The charring temperature was another important experimental factor in order to obtain the desired BaTiO₃ particles. The finally obtained BaTiO₃ charring powders were monodispersed spherical particles and the particle size was 0.1 m to 0.5 m.     

Evaluation of method for simultaneous determination of pesticide residues in fruits and vegetables by collaborative study

A collaborative study involving 8 laboratories was conducted to evaluate a method for the simultaneous determination of pesticide residues in 6 types of fruits and vegetables (spinach, tomato, apple, radish, cabbage and carrot). The method of analysis was the same as reported by Kakimoto et al. in 2003. One hundred and thirty-nine pesticides were spiked by each of 8 laboratories at levels of 0.1 microg/g (pesticides analyzed by GC/MS) or 0.5 microg/g (pesticides analyzed by HPLC) into the 6 kinds of samples. Statistical analysis showed that 111 pesticides could be analyzed with practical precision by this method. For screening purposes, the method could analyze 118 pesticides. The median values of the limits of detection were 0.001-0.041 microg/g. The calibration curves were linear in the range of 0.5-5 microg/mL for most pesticides with median correlation coefficients of 0.983-1.000.     

Performance evaluation system for probabilistic neural network hardware

The probabilistic neural network (PNN) is one of the most promising neural networks, and is now applied to some real-world applications. In order to speed up the PNN calculation considerably, we have developed a PNN hardware system for video image recognition. The performance of the PNN hardware cannot be evaluated precisely until the evaluation system is completed. In this study, we developed a performance evaluation system for the PNN hardware and demonstrated it using the developed evaluation system.This work was presented, in part, at the 8th International Symposium on Artificial Life and Robotics, Oita, Japan, January 24–26, 2003