ESPAR array design for the UHF RFID wireless sensor communication system

In this paper, in order to improve the received signal strength (RSS) and signal quality, three arrays of electronically steerable parasitic array radiator (ESPAR) antennas are suggested for the ultra-high frequency (UHF) radio frequency identification (RFID) communication and sensing system applications. Instead of the single antenna, the array antennas have recently been widely used in many communication systems because of their peak gains, better radiation patterns, and higher radiation efficiency. Also, there are some important issues to use the antenna array like high data rates in wireless communication systems and to better understand the many targets or sensors. In this article, a wireless sensor network (WSN) is being investigated to overcome multipath fading and interference by antenna nulling technology that can be achieved through beam control ESPAR array antennas. The proposed ESPAR array antennas exhibit higher gains like 9.63, 10.2, and 12 dBi and proper radiation patterns from one array to another. Moreover, we investigate the mutual coupling effect on the performance of array antennas with different spacing (0.5λ, 0.75λ, λ) and configurations. It is found that the worst mutual coupling reduced by −28 to −34 dB for 2 × 2 array, −3 to −43 dB for 2 × 3 array, and finally −42 dB to −51 dB due to the antenna spacing from 0.5λ to λ. Thus, these suggested antennas could effectively be applied in the WSN communication systems, internet of things (IoT) networks, and massive wireless and backscatter communication systems.     

Photonic Crystal Palette of Binary Block Copolymer Blends for Full Visible Structural Color Encryption

Structural color (SC) arising from a periodically ordered self-assembled block copolymer (BCP) photonic crystal (PC) is useful for reflective-mode sensing displays owing to its capability of stimuli-responsive structure alteration. However, a set of PC inks, each providing a precisely addressable SC in the full visible range, has rarely been demonstrated. Here, a strategy for developing BCP PC inks with tunable structures is presented. This involves solution-blending of two lamellar-forming BCPs with different molecular weights. By controlling the mixing ratio of the two BCPs, a thin 1D BCP PC film is developed with alternating in-plane lamellae whose periodicity varies linearly from ≈46 to ≈91 nm. Subsequent preferential swelling of one-type lamellae with either solvent or non-volatile ionic liquid causes the photonic band gap of the films to red-shift, giving rise to full-visible-range SC correlated with the pristine nanostructures of the blended films in both liquid and solid states. The BCP PC palette of solution-blended binary solutions is conveniently employed in various coating processes, allowing facile development of BCP SC on the targeted surface. Furthermore, full-color SC paintings are realized with their transparent PC inks, facilitating low-power pattern encryption.     

Practical considerations of Si-based anodes for lithium-ion battery applications

Using Si-based anodes in Li-ion batteries is one of the most feasible approaches to achieve high energy densities despite their disadvantages, such as low conductivity and massive volume expansion, which cause unstable solid electrolyte interphase layers with mechanical failure. The forefront in research and development to address the above challenges suggests the possibility of fully commercially viable cells using various structural and interfacial modifications. In particular, we present a discussion of each dimension of Si-based anodes in multiple controlled systems, including plain, hollow, porous, and uniquely engineered structures, which are further evaluated based on their anode performances, such as initial reversibility, capacity retention for extended cycles with its efficiency, degree of volume expansion tolerance, and rate capabilities, by several practical standards in half cells. With these practical considerations, multi-dimensional structures with uniform size distributions (micrometers, on average) are strongly desired to satisfy the rigorous requirements for widespread applications. Furthermore, we closely examined several full cells composed of Si-based multicomponent anodes coupled with suitable cathodes based on practical standards to propose future research directions for Si-based anodes to keep pace with the rapidly changing market demands for diverse energy storage systems.

Open image in new window

     

The effect of small dose of topiroxostat on serum uric acid in patients receiving hemodialysis

Introduction : Topiroxostat, a recently developed xanthine oxidase inhibitor, is expected to have fewer adverse effects than allopurinol because it has different mechanism of action from alloprinol. However, its dosage, usage and safety have not been established in patients with impaired renal function or those undergoing dialysis at the development since no studies was conducted in these patients. Methods : Cross over clinical trial using 3 months of allopurinol and topiroxostat on 27 maintain Japanese HD patients were carried out. The effects on oxidative stress status of both drugs were also evaluated by measuring oxidation reduction potential. Findings : Twenty‐five of twenty‐seven patients completed study. The mean serum uric acid levels in the topiroxostat‐treated arm was significantly lower than it in the allopurinol‐treated arm time‐dependently (P < 0.0001). Corrected oxidative stress ratio defined as biological antioxidant potential/diacron reactive oxygen metabolites was significantly increased in topiroxostat‐arm (*P = 0.0035), but not in allopurinol‐arm (P = 0.1429). No significant difference was seen in diacron reactive oxygen metabolites, biological antioxidant potential, static oxidation‐reduction potential, and capacity oxidation‐reduction potential between pre and post treatment of both drugs. Discussion : It is suggested that a low dose of topiroxostat decreased serum uric acid sufficiently to maintain it below 7.0 mg/dL in patients receiving hemodialysis.     

Revisiting Statistical Design and Analysis in Scientific Research

Statistics is essential to design experiments and interpret experimental results. Inappropriate use of the statistical analysis, however, often leads to a wrong conclusion. This concept article revisits basic concepts of statistics and provides a brief guideline of applying the statistical analysis for scientific research from designing experiments to analyzing and presenting the data.     

Matching preparatory intervention to coping style: The effects on children's distress in the dental setting

OBJECTIVE: Investigate the effects of matching preparatory interventions to patient's coping styles. METHODS: Participants were 61 children, with a restricted age range of 6 through 9 years old (mean age was 7.9 years), who underwent dental restoration. Participants were randomly assigned to an information intervention, a relaxation intervention, or a control condition. Play and parent-report of sensitization/repression were indices of coping style. The first hypothesis, that play would relate to sensitization/repression, was tested using Pearson correlations. The second hypothesis, that interventions that were congruent with patients' coping styles would be more effective than incongruent interventions, was tested using MANCOVAs. RESULTS: No relation was found between play and coping style. The "congruency hypothesis" was supported for self-reported distress immediately following the intervention. On behavioral distress variables, the interaction between sensitization/repression and condition was contrary to the congruency hypothesis. CONCLUSIONS: Implications for future research and clinical intervention with pediatric populations were discussed.     

CD57+/CD28- T cells in untreated hemato-oncological patients are expanded and display a Th1-type cytokine secretion profile, ex vivo cytolytic activity and enhanced tendency to apoptosis

Protopolystoma (Monogenea, Polystomatidae) is strictly specific to the anuran amphibian genus Xenopus. The host group is characterised by a polyploid series in which chromosome numbers reflect diploid, tetraploid, octoploid and dodecaploid constitutions; the series is considered to have evolved through interspecies hybridisation and genome duplication. This study correlates information on host evolutionary relationships with patterns of parasite speciation and host specificity. Protopolystoma is restricted to one subgenus (Xenopus) with multiples of 36 chromosomes, and is absent from the subgenus Silurana (with multiples of 20 chromosomes). Molecular, biochemical and karyotype evidence distinguishes three subgroups within Xenopus. Representative species from each subgroup, Xenopus muelleri, Xenopus fraseri and Xenopus laevis, have been examined for polystomatid infection. Two species of Protopolystoma occur in each of these host species. In X. muelleri, the two Protopolystoma species reflect parasite co-speciation corresponding with the divergence of two sibling host species. Xenopus fraseri and X. laevis (both with 2n = 36 chromosomes) are implicated in the hybrid origin of two octoploid species, Xenopus wittei and Xenopus vestitus (both 2n = 72). The relationships of the Protopolystoma species in these Xenopus taxa reflect this presumed ancestry. Xenopus wittei carries two species of Protopolystoma, one shared with X. fraseri and the other shared with X. laevis. Xenopus vestitus carries a single species of Protopolystoma which is shared with X. laevis but there is no "heirloom" which reflects its hybrid origin involving X. fraseri. In addition to these shared parasite species which may reflect shared host genes, X. fraseri and X. laevis each carry separate species-specific Protopolystoma which do not occur in other Xenopus species even where there is evidence of common genetic information (as in the allopolyploid wittei and vestitus). This case study may be interpreted as indicating a powerful influence of host genetic factors on susceptibility to infection, host-specificity, and parasite speciation.     

Surgical anatomy for endoscopic subfascial division of perforating veins

PURPOSE: This study was undertaken to define the surgical anatomy of the medial perforating veins (PVs) of the leg and to provide information on how to gain access to all medial PVs from the superficial posterior compartment during a subfascial endoscopic procedure. METHODS: The venous anatomy of 40 limbs (from 23 cadavers) were studied. Medial PVs located between the ankle and the tibial tuberosity were dissected. None of the subjects had pathologic evidence of venous disease. Each PV's type (direct or indirect), size (< 1 mm, 1 to 2 mm, > 2 mm), location (distances from ankle [D1], and tibia [D2]), and accessibility from the superficial posterior compartment were recorded. RESULTS: Five hundred fifty-two PVs were identified (mean, 13.8; range, 7 to 22). Two hundred eighty-seven PVs (52%) directly connected the superficial with the deep systems, 228 (41%) were indirect muscle perforators, and 37 PVs (7%) were undetermined. One hundred thirty-seven PVs (25%) were > 2 mm. Sixty-three percent of PVs were accessible from the superficial posterior compartment. In the distal half of the leg, two groups of direct PVs could be identified (Cockett II: D1, 7 to 9 cm; Cockett III: D1, 10 to 12 cm). In the proximal half of the leg, paratibial direct PVs (D2 < or = 1 cm) were found clustered in three groups (D1, 18 to 22 cm; D1, 23 to 27 cm; D1, 28 to 32 cm). CONCLUSIONS: Our study confirmed the presence of the Cockett II and III PVs and three groups of proximal paratibial PVs, including the "24-cm" perforators. Two thirds of the medial direct PVs are accessible for endoscopic division from the superficial posterior compartment. To divide paratibial PVs, however, incision of the paratibial deep fascia is frequently required.