Magnetic probe array with high sensitivity for fluctuating field

A magnetic probe array is constructed to measure precisely the spatial structure of a small fluctuating field included in a strong confinement field that varies with time. To exclude the effect of the confinement field, the magnetic probes consisting of figure-eight-wound coils are prepared. The spatial structure of the fluctuating field is obtained from a Fourier analysis of the probe signal. It is found that the probe array is more sensitive to the fluctuating field with a high mode number than that with a low mode number. An experimental demonstration of the present method is attempted using a field-reversed configuration plasma, where the fluctuating field with 0.1% of the confinement field is successfully detected.     

Dynamic alternation of primate response properties during trial-and-error knowledge updating

Humans and animals seek appropriate solutions to novel problems through trial-and-error (TE) actions and observation of their outcomes. Once an individual has obtained the knowledge (rule) to solve a problem, knowledge-based (KB) actions may be applied in a stereotypical manner. Solutions can thus be based on TE or KB actions. To characterize this learning process at the behavioral level, we developed a new cognitive task for a laboratory monkey (Macaca fuscata) to perform. In this task, a search array consisting of six elements of different colors was presented, one of which was the behaviorally relevant target. The target color was changed unpredictably with no instruction or signal, requiring the monkey to use a TE search strategy to find the target color. We found that once the monkey identified the relevant color by chance after a color change, correct performance increased in a step-like manner and at the same time, other response properties (reaction time and color-choice tendency) also changed discontinuously. These step-like alternations in behavioral performance may be attributed to the subject’s switching between TE and KB search strategies in the two phases. The present study has therefore provided behavioral evidence for the timing and manner of switching between search strategies during the process of updating knowledge.     

Electrochemical behaviour of pyridinoline, a crosslinking amino acid of collagen

Pyridinoline is a crosslinking amino acid isolated from collagen. Polarographic oxidation and reduction potentials of pyridinoline were measured and compared with those of structurally related compounds, 3-hydroxypyridine, pyridoxine, pyridoxal, and N-methylpyridoxine. Oxidation and reduction potentials of these compounds were found to be near anodic and cathodic limit potentials, respectively, except for pyridoxal. This indicates that a 3-hydroxypyridine ring is very difficult to be reduced or oxidized. The reducibility of pyridinoline with a reducing agent, sodium borohydride, was also studied. It was not reduced by the reagent, however, it was found to be decomposed by light during the treatment. These results indicate that pyridinoline is a so-called "non-reducible" crosslink.     

Iterative learning control of Hamiltonian systems: I/O based optimal control approach

In this note, a novel iterative learning control scheme for a class of Hamiltonian control systems is proposed, which is applicable to electromechanical systems. The proposed method has the following distinguished features. This method does not require either the precise knowledge of the model of the target system or the time derivatives of the output signals. Despite the lack of information, the tracking error monotonously decreases in L/sub 2/ sense and, further, perfect tracking is achieved when it is applied to mechanical systems. The self-adjoint related properties of Hamiltonian systems proven in this note play the key role in this learning control. Those properties are also useful for general optimal control. Furthermore, experiments of a robot manipulator demonstrate the effectiveness of the proposed method.     

WO3/BiVO4 composite photoelectrode prepared by improved auto-combustion method for highly efficient water splitting

We report on the improvement in the water splitting efficiency of a WO₃/BiVO₄ composite photoelectrode by the application of an improved auto-combustion method to the preparation of porous BiVO₄ thin films. The unique feature of this preparation method is the addition of both NH₄NO₃, as a strong oxidizing agent, and an organic additive into BiVO₄ precursor solution. The local decomposition heat of the organic additive and oxidizing agent created a porous film with small, highly crystalline BiVO₄ particles. The photoelectrode has many advantages over existing ones, such as the high light-harvesting efficiency (LHE), a single BiVO₄ phase, the facile access of the holes to the photoelectrode/electrolyte interface, and the ease of water and oxygen diffusion. The maximum incident photon-to-current efficiency (IPCE) was estimated to be 64% (at 440 nm, 1.23 V vs. RHE) and the applied bias photon-tocurrent efficiency (ABPE) reached as high as 1.28%. This ABPE value is highest among all oxide semiconductor photoelectrodes reported previously, except for the case of a stacking photoelectrode system.     

Numerical computation of two-loop box diagrams with masses

A new approach is presented to evaluate multi-loop integrals, which appear in the calculation of cross-sections in high-energy physics. It relies on a fully numerical method and is applicable to a wide class of integrals with various mass configurations. As an example, the computation of two-loop planar and non-planar box diagrams is shown. The results are confirmed by comparisons with other techniques, including the reduction method, and by a consistency check using the dispersion relation.     

Production of thin graphite sheets for a high electrical conductivity film by the mechanical delamination of ternary graphite intercalation compounds

Herein we propose a production scheme for conductive films composed of thin graphite sheets with high crystallinity and polymeric resin. The crystalline graphite sheets were successfully produced from natural graphite powder by solution-phase synthesis of graphite intercalation compounds (GICs), following a wet planetary-ball milling under mild conditions. The shear forces in the milling pot lead to a peeling of graphite flakes. Taking into consideration the interlayer bonding force, the delamination should be preferentially done from the expanded GICs interlayer rather than intrinsic graphite one. Some composite films derived from the phenolic resin and flaky graphite sheets displayed much higher electrical conductivities compared to the film from the feed graphite particles. We also demonstrate the stage structure of synthetic GICs affected the film conductivity. The composite films made from exfoliated products of ground (around stage IV) GICs exhibited high electrical conductivity with a small amount of the graphite sheets.     

Discovery of a Novel Scaffold as an Indoleamine 2,3‐Dioxygenase 1 (IDO1) Inhibitor Based on the Pyrrolopiperazinone Alkaloid,Longamide B

Indoleamine 2,3‐dioxygenase 1 (IDO1) has emerged as a key target for cancer therapy, as IDO1 plays a critical role in the capacity of tumor cells to evade the immune system. The pyrrolopiperazinone alkaloid longamide B and its derivatives were identified as novel IDO1 inhibitors based on docking studies and small library synthesis. The thioamide derivative showed higher IDO1 inhibitory activity than longamide B, and displayed an activity similar to that of a representative IDO1 inhibitor, 1‐methyl‐tryptophan. These results suggest that the pyrrolopiperazinone scaffold of longamide B could be used in the development of IDO1 inhibitors.