Long distance fiber-optic transmission of C-band microwave signals to and from a satellite antenna

We demonstrate here the use of high-speed semiconductor lasers and detectors with low loss optical fiber for the transmission of the 500-MHz C-band microwave signal spectrum to and from a satellite antenna. The optical system has low attenuation and large band, width, so the microwave signals can be transmitted directly at the microwave frequency (4 or 6 GHz) over 20 km of fiber without regeneration or qualization. The optical system introduces ≈ 1 dB or less of degradation for both low spectral density QPSK signals and high spectral density FM video signals present in typical satellite transmission systems. For the video signals, the signal to noise after AM conversion was reduced from 56 to 55 dB. The microwave drive level to the laser must be significantly larger (typically > -10 dBm) than the intensity noise of the laser, yet small enough (typically < 10 dBm) to reduce the intermodulation distortion signals to an acceptable level. The laser bias current must be several times threshold so that the resonance frequency is beyond the frequency band of interest (4-6 GHz in this case). A flat modulation response is then obtained, and the intensity noise and intermodulation levels are low.     

A Device for Measurements of Dielectric Characteristics of Liquid Crystalline Materials, Solid Substances, and Their Melts

The device developed allows one to measure the dielectric characteristics of solid substances and their melts at frequencies of 20–20000 Hz and in a wide temperature range of 20–250°C. The measured temperature dependencies of the dielectric permittivities of several molecular and liquid crystals (stilbene, diphenyl, naphthalene, cholesterylpelargonate, and 8OCB) are presented.     

Subkilohertz fluctuations and mode hopping in high-powergrating-stabilized 980-nm pumps

The behavior of fiber Bragg grating (FBG)-stabilized 980-nm pump lasers is experimentally and theoretically investigated. The subkilohertz noise in the emitted power is related to the coexistence and oscillation between coherence collapsed state and narrow linewidth single-mode (SM) operation. These findings are theoretically discussed by using a multimode time-domain model that accounts for spatial harmonics and includes nonlinear gain. One additional result is an indication that kinks in the L-I curve can be explained by nonlinear mode competition     

Integrated optical devices of InGaAsP/InP heterojunction phototransistor and inner stripe light-emitting diode

New integrated optical devices combining an InGaAsP/InP HPT and an inner-stripe LED are proposed and their fabrication processes are described. The device functions of light amplification, optical bistability, and optical switching are demonstrated in the 1-μm wavelength region.     

Context and lexical access: Implications of nonword interference for lexical ambiguity resolution.

To eliminate potential "backward" priming effects, S. Glucksberg et al (see record 1986-29080-001) introduced a variant of the cross-modal lexical priming task in which subjects made lexical decisions to nonword targets that were modeled on a word related to either the contextually biased or unbiased sense of an ambiguous word. Lexical decisions to nonwords were longer than controls only when the nonword was related to the contextually biased sense of the ambiguous word, leading Glucksberg et al to conclude that context does constrain lexical access and that the multiple access pattern observed in previous studies was probably an artifact of backward priming. We did not find nonword interference when the nonword targets used by Glucksberg et al were preceded by semantically related ambiguous or unambiguous word primes. However, we did replicate their sentence context results when the ambiguous words were removed from the sentences. We conclude that the interference obtained by Glucksberg et al is due to postlexical judgments of the congruence of the sentence context and the target, not to context constraining lexical access. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Cyclic variations in the permeability of the cell wall of Saccharomyces cerevisiae.

To study cell-cycle-related variations in wall permeability of Saccharomyces cerevisiae, two approaches were used. First, an asynchronous culture was fractionated by centrifugal elutriation into subpopulations containing cells of increasing size. The subpopulations represented different stages of the cell cycle as judged by light microscopy. Cell wall porosity increased when these subpopulations became enriched with budded cells. Secondly, synchronous cultures were obtained by releasing MATa cells from alpha-factor induced G1-arrest. These cultures grew synchronously for at least two generations. The cell wall porosity increased sharply in these cultures, shortly before buds became visible and was maximal during the initial stages of bud growth. It decreased in cells which had completed nuclear migration and before abscission of the bud had occurred. The porosity reached its lowest value during abscission and in unbudded cells. We examined the incorporation of mannoproteins into the wall during the cell cycle. SDS-extractable mannoproteins were incorporated continuously. However, the incorporation of glucanase-extractable mannoproteins, which are known to affect cell wall porosity, showed cyclic oscillations and reached its maximum after nuclear migration. This coincided with a rapid decrease in cell wall porosity, indicating that glucanase-extractable mannoproteins might contribute to this decrease.     

Synthesis and characterisation of a submicrometre silicon carbide powder

A beta-silicon carbide powder with a surface area of 30m²g^?l and a mean particle size of < 1μm was produced from the thermal conversion of silicon resin in an atmosphere of hydrogen. The amount of product increased with increasing iron content (0–2.1 wt%) and firing temperature (1200–1500°C). Chemical analysis, X-ray diffraction and i.r. absorption spectrometry were used to follow the conversion reaction.