Non-destructive testing of rock bolts using guided ultrasonic waves

The research outlined in this paper is aimed at the development of a portable non-destructive testing instrument for evaluating the condition of rock bolts. In applications such as coal mine roof reinforcement, the opportunities for rock bolt inspection are currently limited to destructive techniques such as the pull-out test. It is proposed that guided ultrasonic waves can be used to solve this inspection problem, using a pulse-echo test carried out from the free end of the bolt. Suitable test frequencies have been identified through the use of modelling software, and successful laboratory and site trials have been undertaken. The research has shown that the proposed approach is capable of determining the bolt length, and of identifying major defects such as necking, deformation, and loss of resin encapsulation.     

Pool boiling on a superhydrophilic surface

Titanium Dioxide, TiO₂, is a photocatalyst with a unique characteristic. A surface coated with TiO₂ exhibits an extremely high affinity for water when exposed to UV light and the contact angle decreases nearly to zero. Inversely, the contact angle increases when the surface is shielded from UV. This superhydrophilic nature gives a self-cleaning effect to the coated surface and has already been applied to some construction materials, car coatings and so on. We applied this property to the enhancement of boiling heat transfer. An experiment involving the pool boiling of pure water has been performed to make clear the effect of high wettability on heat transfer characteristics. The heat transfer surface is a vertical copper cylinder of 17 mm in diameter and the measurement has been done at saturated temperature and in a steady state. Both TiO₂-coated and non-coated surfaces were used for comparison. In the case of the TiO₂-coated surface, it is exposed to UV light for a few hours before experiment and it is found that the maximum heat flux (CHF) is about two times larger than that of the uncoated surface. The temperature at minimum heat flux (MHF) for the superhydrophilic surface is higher by 100 K than that for the normal one. The superhydrophilic surface can be an ideal heat transfer surface. Copyright © 2002 John Wiley & Sons, Ltd.     

Femtochemistry of Guest Molecules Hosted in Colloidal Zeolites

The ultrafast deprotonation of 2‐(2′‐hydroxyphenyl)benzothiazole (HBT) hosted in nanometer‐sized FAU and MFI zeolites is reported. Samples are prepared via in‐situ incorporation of HBT in the precursor colloidal solutions resulting in the formation of nanometer‐sized zeolites under hydrothermal treatment. The diameter of the zeolite particles formed in the crystalline suspensions is determined by dynamic light scattering and high‐resolution transmission microscopy to lie in the range 40–100 nm. It is shown that the HBT loading does not influence the degree of the zeolite crystallinity but does change the size and the morphology of the individual zeolite nanoparticles. Colloidal suspensions containing the crystalline nanoparticles are well suited for optical investigations since they are sufficiently transparent and clear. The photochemical properties of the HBT guest in the zeolite‐host systems are studied with femtosecond transient transmission spectroscopy. Depending on the acid–base properties either the enol or the keto tautomer of HBT is found to be hosted in the internal voids of the zeolites; upon UV excitation, the HBT‐keto tautomer is converted to the enol form in both MFI‐ and FAU‐type hosts. The HBT photoconversion takes place via an ultrafast deprotonation within 1.5 ps as detected by femtosecond transient absorption spectroscopy.     

Reference feedforward in the idle speed control of a direct-injection spark-ignition engine

The direct-injection spark-ignition engine has emerged as a focus of research in improving fuel economy and controlling emissions. This engine can operate in multiple modes, including a stratified charge mode with an air-fuel ratio as large as 50:1. Operating in stratified mode results in improved fuel economy and reduced CO/sub 2/ emissions. The stratified charge mode is employed during low speed and load conditions, such as during engine idle. The idle speed control problem is cast as a two-input-two-output control problem and a baseline feedback controller is developed based on an existing topology from the literature. Significant delays, however, inhibit our ability to improve the transient response via feedback alone. An improved scheme employing reference feedforward is proposed and several potential topologies are presented. A reference feedforward algorithm is derived and nonlinear simulation results are shown in which the system transient responses are improved considerably.     

[110]-surface strained-SOI CMOS devices

We have newly developed [110]-surface strained-silicon-on-insulator (SOI) n- and p-MOSFETs on [110]-surface relaxed-SiGe-on-insulator substrates with the Ge content of 25%, fabricated by applying the Ge condensation technique to SiGe layers grown on [110]-surface SOI wafers. We have demonstrated that the electron and the hole mobility enhancement of [110]-surface strained-SOI devices amounts to 23% and 50%, respectively, against the mobilities of [110]-surface unstrained MOSFETs. As a result, the electron and the hole mobility ratios of [110]-surface strained-SOI MOSFETs to the universal mobility of (100)-surface bulk-MOSFETs increase up to 81% and 203%, respectively. Therefore, the current drive imbalance between n- and p-MOS can be reduced. Moreover, both the electron and the hole mobilities of the [110]-surface strained-SOIs strongly depend on the drain current flow direction, which is qualitatively explained by the anisotropic effective mass characteristics of the carriers on a [110]-surface Si. As a result, the [110]-surface strained-SOI technology with optimization of the current flow directions of n- and p-MOS is promising for realizing higher speed scaled CMOS.     

Effect of Nontraditional Additives on the Processes of Silicate and Glass Formation

The results of studying the effect of nontraditional additives, namely, metallic aluminum and zinc powders on the process of silicate and glass formation using polythermal and thermogravimetric analysis, are described. The specifics of the glass-melting process for decorative glasses using the nontraditional additives are considered. __________ Translated from Steklo i Keramika, No. 5, pp. 7 – 10, May, 2005.     

Applying CIM technology to image factories

Image processing allows the automation of the business transaction, turning “paper factories” into “image factories.” This burgeoning new area of computerization needs new paradigms, theories, and methods to maximize its effectiveness at cutting time and costs. This paper investigates what this new area of computerization can gain from CIM technology. It examines the similarities between the processing of computer images in a paperless business environment and the processing of materials into products in the manufacturing plant. These similarities will allow us to apply mature, well-tested CIM techniques to emerging image factories.     

Women, nutrition and exercise: a review of athletes' intakes and a discussion of energy balance in active women

Given the heightened interest in nutritional aspects of exercise, and an increase in athletic participation by women, it appeared timely to review the nutritional implications of exercise in women. The initial part of this paper contains a compilation of published studies on the nutrient intakes of female athletes. These reveal that most groups of athletes have adequate nutrient intakes, and that their vitamin and mineral intakes appear to be superior to those of nonathletic women. The average energy intake of athletes in studies summarized in this paper was 2069 kcal, and for certain groups of athletes, energy intakes were even lower. How these women manage to train intensely while consuming energy intakes similar to those of sedentary women is not readily apparent, and for this reason, the remainder of the paper discusses energy balance as affected by activity. Methodological considerations related to assessment of the components of the energy balance equation (food intake, energy expenditure, and body energy stores) are presented, with a focus on considerations in women. The effects of activity on each of these components are then discussed in an attempt to determine whether some form of energy conservation may occur. Finally, effects of activity on the menstrual cycle are reviewed. The observed changes are discussed in relation to nutrition 1) in terms of how nutrition may play a role in their causation; and 2) in terms of their nutritional implications for the amenorrheic athlete, specifically as regards energy balance and bone density.