Diagnostics of Multioperation Processes Using Basic Cells of Digital Homogeneous Structures

Russian Electrical Engineering - The cells of homogeneous digital structures designed for multioperation process diagnostics are considered in the form of graphic models. Digital circuits and...     

The potential use of <Emphasis Type="Italic">Fabaceae</Emphasis> lianas fibers in papermaking

The objective of this study was to anatomically characterize the fibers of nine species of Fabaceae lianas, to determine their potential in papermaking and to define which biometric parameters can be used to distinguish and identify individuals. The species presented average values of 76.81, 57.45, 42.55, and 1.81 for the felting index, wall fraction, coefficient of flexibility, and Runkel index, respectively. It is concluded that only M. ferox and M. madeirense can be recommended for papermaking.     

The impact of natural and artificial weathering on the visual,colour and structural changes of seven tropical woods

This study investigates the effects of wood weathering on changes in its macroscopic and colour characteristics in connection with changes in its molecular and anatomical structure. Seven hardwoods suitable for outdoor architecture—bangkirai, cumaru, cumaru rosa, ipé, jatobá, kusia, and massaranduba—were exposed to the exterior out of ground contact for 1–36 months according to EN 927-3, and for 1–12 weeks in Xenotest with water spraying according to partly modified EN 927-6. With prolonged weathering, the following changes occurred in the top surfaces of all tropical woods: (1) visual—creation of longitudinal macro-cracks, (2) spectrophotometry and CIE-L ^? a ^? b ^? —darkening in exterior exposure mainly due to pollutants, except for ipé, and vice versa lightening in Xenotest, as well as greening and blueing in both modes of exposure, (3) FTIR—faster decrease of guaiacyl than syringyl lignin, absolute decrease of conjugated and unconjugated carbonyl groups in the newly formed lignin-polysaccharide-extractive substrate in the photo-oxidized and washed-out cell walls, and decrease of cellulose crystallinity, (4) SEM—damaging of cell-walls by micro-cracks, and their degradation by thinning. Connections between changes of the individual characteristics of weathered woods, for example, between the colour (ΔE*, etc.) and the molecular structure (carbonyls, etc.), were also determined.     

Characteristics of cricket (<Emphasis Type="Italic">Gryllus bimaculatus</Emphasis>) chitosan and chitosan-based nanoparticles

The field cricket (Gryllus bimaculatus) is commonly consumed as food in different parts of the world. This study was performed to characterize the chitosan extracted from crickets and to assess its potential use to the growing functional market. The degree of deacetylation (DA), Fourier-transform infrared spectra, X-ray diffraction patterns, molecular mass, scanning electron microscopy spectra, and color were measured. Cricket chitosan nanoparticles were prepared, and the optimal conditions were identified. The molecular mass of the cricket chitosan was lower than that of commercial chitosan; however, the DA, FTIR, and XRD spectra were similar. The particle size (208.27 ± 3.47 nm), zeta potential (35.72 ± 1.29 mV), and polydispersity index (PDI: 0.27 ± 0.03) of the cricket chitosan NPs were superior to the commercial. Addition of NaCl reduced the cricket chitosan NPs size up to 15.5%. This finding is a novel trial to prove the availability of the insect chitosan with a low molecular mass as an active carrier source.     

Impact of a pulse corona discharge on the formation of hydrogen peroxide in different types of water

Using an example of detecting hydrogen peroxide the article showed the possibility of generation of highly active radicals in various types of water (high-resistance, distilled and tap) in their treatment by a pulse positive corona discharge. The article has established the impact of the conditions for the formation of plasma, time of treatment and temperature of the solution at the output of hydrogen peroxide and also for the change of some physicochemical properties of investigated water samples.     

A hybrid approach to detect crack parameters using measured natural frequencies in thin walled angle section steel beams

Present study outlines a hybrid approach using Finite Element Method (FEM)–Response Surface Method (RSM)–Genetic Algorithm (GA) to predict the crack parameters, namely crack position and crack depth ratio with the help of only the measured natural frequencies of cracked thin walled beams. Numerical experimental trials of cracked beams have been conducted based on design of experiment (DOE) approach using an improved Finite element model. The improvement has been achieved by consideration of warping stiffness in cracked angle section beam. Thereafter, regression analysis has been conducted to construct Response Surface Function (RSF). Optimum crack parameters were then calculated using GA by minimizing an objective function which has been formed as the root mean square (RMS) of the residuals between RSFs and measured frequencies. Results of the study indicate that, the proposed approach performs with excellent accuracy and it does not require the response of an uncracked beam as benchmark information.     

Evaluation of solar temperature field under different wind speeds for Shanghai 65 m radio telescope

The Shanghai 65 m radio telescope is currently the largest full range rotatable radio telescope in Asia. Gravity, wind and temperature are the three main factors which may have a bad effect on the reflector’s surface precision. To study the effect of the thermal deformation caused by daily non-uniform temperature fields on the surface precision of the main reflector, both the temperature field and its effect were studied in detail for two typical days (January 15th and July 15th). The method to simulate temperature fields was studied initially, considering heat conduction, solar radiation, shadowing, air convection, sky radiation and ground radiation. Then, an integral parametric thermal finite element model (FEM) of the telescope was established using the ANSYS thermal analysis module. Finally, the effect of non-uniform temperature fields on the surface precision of the main reflector was estimated in terms of the Root Mean Square (RMS) deformation based on temperature transient analysis. The proposed methods and conclusions drawn can provide valuable information for thermal design, thermal monitoring and thermal control of the Shanghai 65 m radio telescope and other similar giant antenna structures.     

Structural optimization of hollow-section steel trusses by differential evolution algorithm

This paper deals with the weight minimization of planar steel trusses by adopting a differential evolution-based algorithm. Square hollow sections are considered. The design optimization refers to size, shape and topology. The design variables are represented by the geometrical dimensions of the cross sections of the different components of the truss, directly involving the size of the structure, and by some geometrical parameters affecting the outer shape of the truss. The topology is included in the optimization search in a particular way, since the designer at different runs of the algorithm can change the number of bays keeping constant the total length of the truss, to successively choose the best optimal solution. The minimum weight optimum design is posed as a single-objective optimization problem subject to constraints formulated in accordance with the current Eurocode 3. The optimal solution is obtained by a Differential Evolutionary (DE) algorithm. In the DE algorithm, a particular combination of mutation and crossover operators is adopted in order to achieve the best solutions and a specific way for dealing with constraints is introduced. The effectiveness of the proposed approach is shown with reference to two case-studies. The analysis results prove the versatility of the optimizer algorithm with regard to the three optimization categories of sizing, shape, topology as well as its high computational performances and its efficacy for practical applications. In particular useful practical indications concerning the geometrical dimensions of the various involved structural elements can be deduced by the optimal solutions: in a truss girder the cross section of the top chord should be bigger than the one of the bottom chord as well as diagonals should be characterized by smaller cross sections with respect to the top and bottom chords in order to simultaneously optimize the weight and ensure an optimal structural behaviour.     

Development of a thermal scheme for a cogeneration combined-cycle unit with an SVBR-100 reactor

At present, the prospects for development of district heating that can increase the effectiveness of nuclear power stations (NPS), cut down their payback period, and improve protection of the environment against harmful emissions are being examined in the nuclear power industry of Russia. It is noted that the efficiency of nuclear cogeneration power stations (NCPS) is drastically affected by the expenses for heat networks and heat losses during transportation of a heat carrier through them, since NPSs are usually located far away from urban area boundaries as required for radiation safety of the population. The prospects for using cogeneration power units with small or medium power reactors at NPSs, including combined-cycle units and their performance indices, are described. The developed thermal scheme of a cogeneration combined-cycle unit (CCU) with an SBVR-100 nuclear reactor (NCCU) is presented. This NCCU should use a GE 6FA gasturbine unit (GTU) and a steam-turbine unit (STU) with a two-stage district heating plant. Saturated steam from the nuclear reactor is superheated in a heat-recovery steam generator (HRSG) to 560–580°C so that a separator–superheater can be excluded from the thermal cycle of the turbine unit. In addition, supplemental fuel firing in HRSG is examined. NCCU effectiveness indices are given as a function of the ambient air temperature. Results of calculations of the thermal cycle performance under condensing operating conditions indicate that the gross electric efficiency η _{el NCCU} ^gr of = 48% and N _{el NCCU} ^gr = 345 MW can be achieved. This efficiency is at maximum for NCCU with an SVBR-100 reactor. The conclusion is made that the cost of NCCU installed kW should be estimated, and the issue associated with NCCUs siting with reference to urban area boundaries must be solved.