Hydrogen gas pick-up mechanism of Al-alloy melt during Lost Foam Casting

The hydrogen gas pick-up problem that can occur during Lost Foam Casting was investigated with reduced pressure tests and real castings.The initial hydrogen concentration of the melt and the contact time between melt and polystyrene had a main effect on the hydrogen gas pick-up of Al melt. The hydrogen gas pick-up of Al alloy depended also on pouring temperature and a proper metal front temperature gave the minimum hydrogen pick-up. At a low pouring temperature, the hydrogen went into the melt mainly from entrapped liquid product of polystyrene but at high pouring temperature it was by the gas as well as the liquid product. The mold flask evacuation down to 710 torr decreased the gas porosity down by around 0.4 vol%. The permeability of coating thickness had a great effect because it affects the filling time and the easy removal of liquid polystyrene.     

Using ion implantation to adjust the transition temperature of superconducting films

We summarize a continuing investigation into using ion implantation to alter the transition temperature of superconducting thin films. The primary motivation for the work presented here was to study the feasibility of using magnetic ion doping to replace the bi-layer T_c control process currently used for certain cryogenic detector applications at National Institute for Standards and Technology. The results from work with various ion species implanted into aluminum, molybdenum, titanium and tungsten host films are presented.     

Synthesis and Properties of NdMCr2O5 (M = Na, K, Cs) and NdMgCr2O5.5 Chromites

NdMCr₂O₅ (M = Na, K, Cs) and NdMgCr₂O_5.5 are prepared by solid-state reactions between appropriate oxides and carbonates and are shown to have a tetragonal structure. The heat capacity of these chromites, measured from 298.15 to 673 K, exhibits sharp changes attributable to second-order phase transitions. The C _p ⁰(T) data are represented by quadratic best fit equations. The electrical resistivity of the chromites is measured between 303 and 493 K. The results attest to semiconducting behavior of the materials in certain temperature ranges.     

Surface Activation of Diamond Particles in the Process of Chemical Coppering

The effect of the composition of sensitizing–activating solutions on the activation efficiency and the chemical coppering of diamond powders is studied. The results demonstrate that stabilizing additives improve the stability of the solutions, influence the average coppering rate, and play a key role in determining the morphology and quality of the resultant coatings. The most effective stabilizing additive is synthamid-10, which ensures the deposition of high-quality copper coatings.     

Modeling and Analysis of a Long Thin Conducting Stripline

A long thin conducting stripline embedded in a dielectric and centered between two large conducting plates, i.e., the stripline environment, is considered. The stripline is modeled as infinitely long, infinitely thin, and perfectly conducting by first considering a stripline of finite length, thickness, and conductivity in a dielectric layer. Starting from Maxwell's equations and assuming that the current on the stripline is a propagating wave in length direction, asymptotic expressions for the fields inside and in the neighbourhood of the stripline are deduced. These expressions are used to model the stripline in the stripline environment, which leads to a boundary-value problem for the electric potential. This problem is solved by two different approaches, leading to integral equations for the current and for an auxiliary function describing the electric potential. A relation between the current and the auxiliary function is deduced, which is used to obtain asymptotic expressions for current and impedance. Results are compared with a numerical solution of the integral equation for the current and with results in literature.     

A compliant-hull concept for planning craft wave-impact shock reduction

The subject of this paper is analysis of high-speed planing-craft wave impact, with the inclusion of hull-surface compliance. The analysis methods were extended in an effort to develop compliant-surface technology for wave-impact shock reduction. The practical outcome of this work, along with experimental cylinder drop-test evaluations, have been reported previously. The overall technology developed is composed of compliant plates over a sub-length of the boat hull. The plates are hinged at the boat keel and supported by vented air bags at the chines. Thus, the required analysis has coupled hydrodynamic, gas-dynamic, and structural-dynamic parts. Only the hydrodynamic part of the complete model is covered here. On the basis of the cylindrical geometry of the drop-test cylinder, two-dimensional theory has been used exclusively. The time history of the distribution of plating deflection predicted from the full analysis is imposed in the free-falling cylinder analysis to demonstrate execution of the hydrodynamic part of the complete coupled theory. The reductions in impact acceleration reported here are therefore the same as determined from the complete analysis.     

SQUID NMR Studies of the Second Layer of 3He at High Density

Nuclear magnetism in the second layer of ³He films on graphite has been studied as a function of density in the zero-field limit at temperatures down to 300 µK. Total surface coverages in this study ranged from 20 atoms/nm² (the lowest coverage at which the effective exchange parameter turns ferromagnetic) through the two-phase region (ending at about 24 atoms/nm²) and into the single-phase imcommensurate solid region up to 31.2 atoms/nm². The surface layers were studied using both pulsed and cw NMR measured with our SQUID NMR system in magnetic fields of 500 µT and lower. As the surface density continues to increase in the single-phase region, the exchange constant decreases consistently with a picture of steric hindrance impeding ferromagnetic exchange. Several different observational features scale with this inferred exchange: low-field magnetization, NMR frequency shift, and the temperature of onset of significant magnetization.     

The reaction of ceria coatings on mica with H2S: An in-situ X-ray diffraction study

Thin layers of ceria were deposited on the surface of mica platelets in solution. The reaction of such particles with hydrogen sulfide yields a red colored special effect pigment. The ceria layer reacts with H₂S to produce a variety of sulfide and oxysulfide phases. The reaction path discovered in situ by time and temperature resolved X-ray diffraction is CeO₂→CeS₂→C-Ce₂S₃→Ce₁₀S₁₄O. The reaction itself is extremely variable depending on gas flow, heating rates and decomposition atmospheres. Effects on the thin film are recorded by scanning electron microscopy (SEM) and revealed a destruction of the layer once red Ce₁₀S₁₄O was formed. The product layer then reveals the typical nonwetting behaviour of a liquid on a surface.